
5 / 5
4.2 Operation Instruction
The solar panel should be placed in direct sunlight and adjusted to the appropriate angle to
receive light for maximum power generation.
This product is suitable for charging portable energy storage power supply equipment with
rated voltage DC 48-70V (need to be with built-in solar charging protection) or battery.
Warning: Do not connect the solar panels directly to charge the battery. PV charging
controller must be installed to protect the battery from overcharging or to prevent the
wrong connection which may cause damage or personnel injury. If the charged device is an
integrated energy storage machine, please follow its instruction to connect the solar panel.
Ensure the correct connection of positive / negative poles to PV charging controller / energy
storage system.
Check the specificaton, power, current, voltage of PV charging controller / battery / energy
storage system, ensure these values are within the limit of solar panel, otherwise it may cuase
damages and other results.
The voltage of solar panel under sunlight has exceeded the human body safety voltage.
Warning: To prevent electric shock, do not contact or short-circuit the solar panel when solar
panel is working on the sunlight.
Warning: To precent electric shock, stop use the solar panel if it is damaged.
To use it carefully, it is strictly prohibited to heavily drop, press, impact the solar panel
otherwise cells would be damaged.