G2glighting Talent I Series User manual

Talent I Series
www.g2glighting.com155A10thStPassaic,NJ07055Phone:[phone]Fax:[phone]
TALENT I MASTER INSTRUCTIONS
The Talent I Master LED Controller includes an easy to use remote control to adjust brightness, white balance and
playback speed, and it's exterior pre-set buttons allow for fast and simple programing.
Highly energy efficient, and designed with four true-color tones, the Talent I Master Controller is compatible with a
wide variety of different lamp types (including DMX512 lamps).
Supporting 32G with it's SD card storage, the Talent I Master allows you to preset and save up to 255 program files.
SPECIFICATIONS
15W
283MM*134MM*45MM
Remote control SD card AC power cord
Rated Voltage
Rated power
Size
Spacing between Attachment Holes
MASTER SIZE
MASTER Button Control Panel
MASTER Remote Control Button Definition
ON
OK
MENU
SD
LINKA LINKB
OFF
283MM
250MM
268.05MM
68MM
134MM 45MM
I
O
MASTER FRONT VIEW
MASTER REAR VIEW
Power Switch
Button Control Panel
Network Interface
Power /
Communication
Indicator
LCD Display SD Slot
Power Interface
MENU
Play and Pause
Set Menu
Self Test
Exit Setup
Numeric Key
Confirm and save
Plus
Minus
Previous fragment
Next fragment
OK
Add key
Key reduction
ON
OKMU
SD
LINKA
AC 100V-240V
LINKB
OFF
I
O
MENU
TEST
OK
OKMU
MU
0
+
-
1 2 3
4 5 6
7 8 9
C
Standard Accessories
268MM；68 MM
AC 100V～240V
It's convenient self-testing function allows the customer to preview their selected settings and easily make any
needed changes before applying the finalized design to their project.

n this menu, select to clear and reset all the sub-controller ID numbers in the Master Controller.
In this menu, select to adjust the loop mode or to switch to digital mode.
Select to adjust the program serial number.r
Select to save and exit, or select to exit without saving.r
Loop play(When the number is displayed is the selected fragment number)
In this menu, select to set playback speed. Select to save and exit, or select to exit without saving.r r
a). In the main menu of the Talent I Master, press to enter the settings screen. As shown below:
c) Select to enter and save the date and time. As shown below:
d) Select again to enter and adjust the brightness settings. See example below:
e) Select again to enter control the individual brightness of channels A, B, C, or D As shown below:
f) Select to enter the sub-controller ID Number, and to select fixed Number. See description below:
g) To Clear your set numbers in the sub-controller menu, select . See below:
In the menu, select to set your desired brightness, then select to save and exit. Select to exit without saving.
o change the number positions, you can select in the menu, or easily use the numeric keys to modify the order.
The first number refers to the initial controllers number. The last number refers to last controller number.
After you have chosen and selected your preferred numbers, select the key to save your sub-controller ID number.
In the menu, press to set brightness.
Select to adjust the channel positions of A, B, C, or D, select again to set up the required brightness of the four channels.
Select to save and exit, or select to exit without saving.
In this menu, select to move to next location, select to adjust the numerical value. Select to save and exit,
or select to exit without saving.
Talent I Series
LCD DISPLAY & REMOTE CONTROL INSTRUCTIONS
www.g2glighting.com155A10thStPassaic,NJ07055Phone:[phone]Fax:[phone]
1.
TALENT I MASTER: LCD Main Screen (after boot)
2. TALENT I MASTER: Parameter Settings
Controller name
MR- BF 12B
PLAY 001 Program Fragment Number Currently Playing
Catalog
INDEX
=LOOP
Frame Count/ per Second
Playback Speed
SPEED
=25FPS
Brightness Percentage
Brightness
BRIGHT
=100%
Brightness Percentage
Channel A Brightness
COLOR A
=100%
Fixed NO.
ID NO.
Fix ID
001 001
Clear
ID NO.
Fix ID
CLEAR
Brightness Percentage
Channel B Brightness
COLOR B
=100%
Brightness Percentage
Channel C Brightness
COLOR C
=100% Brightness Percentage
Channel D Brightness
COLOR D
=100%
Month －－ Day
Year
2015
--01 --08 Hour－Minute－Second
Time
2015
--01 --08
b). Select to enter the playback speed selection menu. As shown below:

When playing a segment, select the or button, or use the Remote Control to select .
In the Talent I Master Play menu, select . You will see the current time on the LCD screen.
To continue to the main menu select . To re-set, please refer to Part 2, section C.
Press the power button to power down the screen.
In the Talent I Master Play menu, select to pause the LCD screen display.
In this menu select to set Playback speed. Select to save and exit.
a.In the Talent I Master main menu, select enter the fragment section menu. As shown below:
b) Select to setup desired Playback speed:
c) Select to enter and adjust the brightness settings. See below:
Note: During Self-Test Mode, select to shift to various self-testing modes.
In this menu select to change the program numbers and adjust the loop mode. Select to save and exit.
OKMU
MU
Loop (Fragment Number displayed)
Index
INDEX
=LOOP
Frames per second
Playback Speed
SPEED
=25FPS
Select to select the Date and Time. Select to save and exit.
Brightness Percentage
Brightness
BRIGHT
=100%
d) Select to adjust the brightness in channels A ,B, C, and D.
a) Turning off the 'Play mode' in the Master Controller:
c) Adjusting the Program Segment:
d) Adjusting Current Time to the Master Controller:
b) Pause 'Play' in Master Controller:
In the menu, select to adjust the brightness for each individual channel. Select to save and exit.
Brightness Percentage
Channel A Brightness
COLOR A
=100% Brightness Percentage
Channel B Brightness
COLOR B
=100%
Brightness Percentage
Channel C Brightness
COLOR C
=100% Brightness Percentage
Channel D Brightness
COLOR D
=100%
In the Talent I Master's main menu, select () to Self-Test your selections. As shown below:
Talent I Series
www.g2glighting.com155A10thStPassaic,NJ07055Phone:[phone]Fax:[phone]
3. TALENT I MASTER: Testing your Design
4. Talent I Master: Key Setting Parameter
5. Talent I Master: Remote Control Operations
--TEST--
1.RED
Red Self Test
--TEST--
2.GREEN
Green Self Test
--TEST--
3.BLUE
Blue Self Test
--TEST--
4.WHITE
White Self Test
--TEST--
5.RGBW
Red Green Blue & White Test
--TEST--
6.COLOR
Multi-color Test