Gaggenau BOP2501.2 Operating and maintenance instructions

en User manual and installation instructions
BOP2501.2
BOP2511.2
Oven
Gaggenau

en Safety
2
Table of contents
INFORMATION FOR USE
1 Safety...................................................................2
2 Preventing material damage ..............................5
3 Environmental protection and saving en-
ergy ......................................................................6
4 Familiarising yourself with your appliance .......7
5 Accessories.......................................................11
6 Before using for the first time ..........................12
7 Basic operation .................................................13
8 Timer functions .................................................13
9 Long-term timer ................................................14
10 Childproof lock..................................................15
11 Searing function................................................15
12 Automatic programmes....................................15
13 Individual recipes..............................................16
14 Core temperature probe ...................................17
15 HomeConnect ..................................................20
16 Basic settings....................................................22
17 Cleaning and servicing.....................................24
18 Pyrolytic self-cleaning ......................................26
19 Troubleshooting................................................27
20 Disposal.............................................................29
21 How it works......................................................29
22 Customer Service..............................................52
23 Declaration of Conformity ................................52
24 INSTALLATION INSTRUCTIONS ......................52
24.1 General installation instructions......................52
1 Safety
Observe the following safety instructions.
1.1 General information
¡Read this instruction manual carefully.
¡Keep the instruction manual and the
product information safe for future refer-
ence or for the next owner.
¡Do not connect the appliance if it has been
damaged in transit.
1.2 Intended use
This appliance is designed only to be built
into kitchen units. Read the special installation
instructions.
Only a licensed professional may connect ap-
pliances without plugs. Damage caused by in-
correct connection is not covered under the
warranty.
Only use this appliance:
¡To prepare meals and drinks.
¡in private households and in enclosed
spaces in a domestic environment.
¡up to an altitude of max. 2000m above
sea level.
1.3 Restriction on user group
This appliance may be used by children aged
8 or over and by people who have reduced
physical, sensory or mental abilities or inad-
equate experience and/or knowledge,
provided that they are supervised or have
been instructed on how to use the appliance
safely and have understood the resulting
dangers.
Do not let children play with the appliance.
Children must not perform cleaning or user
maintenance unless they are at least 15 years
old and are being supervised.
Keep children under the age of 8 years away
from the appliance and power cable.
1.4 Safe use
Always place accessories in the cooking com-
partment the right way round.
→"Accessories", Page11
WARNING‒Risk of fire!
Combustible objects that are left in the cook-
ing compartment may catch fire.
▶Never store combustible objects in the
cooking compartment.
▶If smoke is emitted, the appliance must be
switched off or the plug must be pulled out
and the door must be held closed in order
to stifle any flames.
Loose food remnants, fat and meat juices
may catch fire.
▶Before using the appliance, remove the
worst of the food residues and remnants
from the cooking compartment, heating ele-
ments and accessories.

Safety en
3
Opening the appliance door creates a
draught. Greaseproof paper may come into
contact with the heating element and catch
fire.
▶Never place greaseproof paper loosely
over accessories when preheating the ap-
pliance and while cooking.
▶Always cut greaseproof paper to size and
use a plate or baking tin to hold it down.
WARNING‒Risk of burns!
The appliance and its parts that can be
touched become hot during use.
▶Caution should be exercised here in order
to avoid touching heating elements.
▶Young children under 8 years of age must
be kept away from the appliance.
Accessories and cookware get very hot.
▶Always use oven gloves to remove ac-
cessories or cookware from the cooking
compartment.
When the cooking compartment is hot, any al-
coholic vapours inside may catch fire. The ap-
pliance door may spring open. Hot steam and
jets of flame may escape.
▶Only use small quantities of drinks with a
high alcohol content in food.
▶Do not heat spirits (≥ 15% vol.) when undi-
luted (e.g. for marinating or pouring over
food).
▶Open the appliance door carefully.
The telescopic shelves become hot when the
appliance is in use.
▶Allow hot telescopic shelves to cool down
before touching them.
▶Only touch hot telescopic shelves with
oven gloves.
The inside of the appliance door becomes
very hot during operation.
▶Always open the appliance door as far as it
will go.
▶Ensure that the appliance door does not
swing back.
▶Avoid contact with the inside of the appli-
ance door.
WARNING‒Risk of scalding!
The accessible parts of the appliance become
hot during operation.
▶Never touch these hot parts.
▶Keep children at a safe distance.
Hot steam may escape when you open the
appliance door. Steam may not be visible, de-
pending on the temperature.
▶Open the appliance door carefully.
▶Keep children at a safe distance.
If there is water in the cooking compartment
when it is hot, this may create hot steam.
▶Never pour water into the cooking compart-
ment when the cooking compartment is
hot.
WARNING‒Risk of injury!
Scratched glass in the appliance door may
develop into a crack.
▶Do not use any harsh or abrasive cleaners
or sharp metal scrapers to clean the glass
on the oven door, as they may scratch the
surface.
The appliance and its parts that can be
touched may have sharp edges.
▶Take care when handling and cleaning
them.
▶If possible, wear protective gloves.
The hinges on the appliance door move when
the door is opened and closed, which could
trap your fingers.
▶Keep your hands away from the hinges.
WARNING‒Risk of electric shock!
Incorrect repairs are dangerous.
▶Repairs to the appliance should only be
carried out by trained specialist staff.
▶Only use genuine spare parts when repair-
ing the appliance.
▶If the power cord or the appliance power
cable of this appliance is damaged, it must
be replaced with a special power cord or
special appliance power cable, which is
available from the manufacturer or its Cus-
tomer Service.
If the insulation of the power cord is dam-
aged, this is dangerous.
▶Never let the power cord come into contact
with hot appliance parts or heat sources.
▶Never let the power cord come into contact
with sharp points or edges.
▶Never kink, crush or modify the power
cord.
An ingress of moisture can cause an electric
shock.
▶Do not use steam- or high-pressure clean-
ers to clean the appliance.

en Safety
4
If the appliance or the power cord is dam-
aged, this is dangerous.
▶Never operate a damaged appliance.
▶Never pull on the power cord to unplug the
appliance. Always unplug the appliance at
the mains.
▶If the appliance or the power cord is dam-
aged, immediately unplug the power cord
or switch off the fuse in the fuse box.
▶Call customer services. →Page52
WARNING‒Risk of suffocation!
Children may put packaging material over
their heads or wrap themselves up in it and
suffocate.
▶Keep packaging material away from chil-
dren.
▶Do not let children play with packaging ma-
terial.
Children may breathe in or swallow small
parts, causing them to suffocate.
▶Keep small parts away from children.
▶Do not let children play with small parts.
1.5 Core temperature probe
Follow these safety instructions when using
the core temperature probe.
WARNING‒Risk of electric shock!
An incorrect core temperature probe may
damage the insulation.
▶Only use the core temperature probe that is
suitable for this appliance.
1.6 Cleaning function
WARNING‒Risk of fire!
The outside of the appliance gets very hot
when the cleaning function is in progress.
▶Never hang combustible objects, e.g. tea
towels, on the door handle.
▶Leave the front of the appliance clear.
▶Keep children at a safe distance.
If the door seal is damaged, a large amount
of heat is generated around the door.
▶Do not scrub or remove the seal.
▶Never operate the appliance if the seal is
damaged or missing.
Loose food remnants, fat and meat juices
may catch fire.
▶Before using the cleaning function, always
remove the worst of the food residues and
remnants from the cooking compartment
and accessories.
▶Wipe the cooking compartment with a
damp cloth.
WARNING‒Risk of serious harm to
health!
The appliance gets very hot when the clean-
ing function is in progress. The non-stick coat-
ing on baking trays and tins is destroyed and
noxious gases are released.
▶Never clean non-stick baking trays or bak-
ing tins using the cleaning function.
▶Only clean enamelled accessories at the
same time.
WARNING‒Risk of harm to health!
The cleaning function heats up the cooking
compartment to a very high temperature so
that food left over from roasting, grilling and
baking will burn off. This process releases va-
pours, which can irritate mucous membranes.
▶Keep the kitchen well ventilated while the
cleaning function is running.
▶Do not remain in the room for long periods.
▶Keep children and pets away.
WARNING‒Risk of burns!
The cooking compartment gets very hot when
the cleaning function is in progress.
▶Never open the appliance door.
▶Allow the appliance to cool down.
▶Keep children at a safe distance.
The outside of the appliance gets very hot
when the cleaning function is in progress.
▶Never touch the appliance door.
▶Allow the appliance to cool down.
▶Keep children at a safe distance.
Bulbs become very hot when switched on.
There is still a risk of burning for some time
after they have been switched off.
▶Allow the bulbs to cool down before clean-
ing the appliance.
▶Keep the lighting switched off for cleaning.

Preventing material damage en
5
1.7 Halogen bulb
WARNING‒Risk of burns!
The bulbs in the cooking compartment get
very hot. There is still a risk of burning for
some time after they have been switched off.
▶Do not touch the glass cover.
▶Avoid contact with your skin when cleaning.
Bulbs become very hot when switched on.
There is still a risk of burning for some time
after they have been switched off.
▶Allow the bulbs to cool down before repla-
cing them.
WARNING‒Risk of electric shock!
When changing the bulb, the bulb socket con-
tacts are live.
▶Before replacing the bulb, ensure that the
appliance is switched off in order to pre-
vent a potential electric shock.
▶Also unplug the appliance from the mains
or switch off the circuit breaker in the fuse
box.
2 Preventing material damage
2.1 General information
ATTENTION!
Objects on the cooking compartment floor will cause
heat to build up. The baking and roasting times will no
longer be correct and the enamel will be damaged.
▶Do not place anything directly on the cooking com-
partment floor.
▶Do not cover the cooking compartment floor with
any sort of foil or greaseproof paper.
When the cooking compartment is hot, any water in-
side it will create steam. The change in temperature
may cause damage.
▶Never pour water into the cooking compartment
when it is still hot.
▶Never place cookware containing water on the
cooking compartment floor.
The prolonged presence of moisture in the cooking
compartment leads to corrosion.
▶Do not keep moist food in the cooking compartment
for a long time with the door closed.
▶Do not store food in the cooking compartment.
Fruit juice dripping from the baking tray leaves stains
that cannot be removed.
▶When baking very juicy fruit flans, do not pack too
much on the baking tray.
▶If possible, use the deeper universal pan.
If aluminium foil comes into contact with the door pane,
it could cause permanent discolouration.
▶Do not allow aluminium foil in the cooking compart-
ment to come into contact with the door pane.
Leaving the appliance to cool down with the door open
will damage the front of neighbouring kitchen units over
time.
▶Always allow the cooking compartment to cool
down with the door closed after cooking at high
temperatures.
▶Take care not to trap anything in the appliance
door.
▶Only leave the cooking compartment to dry with the
door open if a lot of moisture was produced during
operation.
If the seal is very dirty, the appliance door will no
longer close properly during operation. This may dam-
age the front of adjacent kitchen units.
▶Keep the seal clean at all times.
▶Never operate the appliance if the seal is damaged
or missing.
Sitting or placing objects on the appliance door may
damage it.
▶Do not place, hang or support objects on the appli-
ance door.
▶Do not place cookware or accessories on the appli-
ance door.
With certain models, accessories may scratch the door
pane when closing the appliance door.
▶Always push accessories fully into the cooking com-
partment.
Carrying the appliance by the door handle could break
it. The door handle cannot support the weight of the
appliance.
▶Do not carry or hold the appliance by the door
handle.
The heat during the pyrolytic self-cleaning may damage
certain accessories.
▶Do not clean the wire rack, cast roaster, core tem-
perature probe, baking stone or other accessories
using the pyrolytic self-cleaning function.
▶Only clean GAGGENAU baking trays and grill trays
with the pyrolytic self-cleaning function.
2.2 Core temperature probe
WARNING‒Risk of electric shock!
An incorrect core temperature probe may damage the
insulation.
▶Only use the core temperature probe that is suitable
for this appliance.
ATTENTION!
Temperatures above 250°C damage the core temper-
ature probe.
▶Only use the core temperature probe in your appli-
ance at a maximum temperature of 250°C.
▶Do not use the core temperature probe with the full
surface grill or compact grill types of heating.

en Environmental protection and saving energy
6
▶Before using full surface grill or compact grill, re-
move the core temperature probe from the cooking
compartment.
▶When using the core temperature probe with the full
surface grill type of heating and air recirculation, set
the temperature to a maximum of 250°C.
You may damage the cable of the core temperature
probe with the appliance door.
▶Do not trap the cable of the core temperature probe
in the appliance door.
The heat of the grill heating element may damage the
core temperature probe.
▶Ensure that the distance between the grill heating
element and the core temperature probe and the
cable of the core temperature probe is a few centi-
metres. In doing so, ensure that the meat can ex-
pand during the cooking process.
Moisture may damage the core temperature probe.
▶Do not clean the core temperature probe in the
dishwasher.
3 Environmental protection and saving energy
3.1 Disposing of packaging
The packaging materials are environmentally compat-
ible and can be recycled.
▶Sort the individual components by type and dispose
of them separately.
3.2 Saving energy
If you follow these instructions, your appliance will use
less power.
When cooking multiple dishes, do so in succession or
in parallel.
¡The cooking compartment is heated after cooking
the first dish. This reduces the cooking time for the
following dishes.
If the cooking time is relatively long, you can switch
the appliance off 10minutes before the cooking time
ends.
¡There will be enough residual heat to finish cooking
the dish.
In hot air mode, you can bake on more than one level
at a time.
¡This will save energy.
Use dark-coloured, black-coated or enamelled baking
tins.
¡These types of baking tin absorb the heat particu-
larly well.
Open the appliance door as little as possible during
operation.
¡This maintains the temperature in the cooking com-
partment and eliminates the need for the appliance
to reheat.

Familiarising yourself with your appliance en
7
4 Familiarising yourself with your appliance
4.1 Appliance
You can find an overview of the parts of your appliance
here.
1 2 3 4
5
1
Door seal
2
Grill element
3
Interior lighting
4
Connection socket for core temperature probe
→Page17
5
Connection socket for additional heating ele-
ment (special accessory for the baking stone
and roaster)
4.2 Cooking compartment
The cooking compartment has 4 shelf levels. Count the
shelf levels from the bottom up.
WARNING‒Risk of burns!
The inside of the appliance door becomes very hot dur-
ing operation.
▶Always open the appliance door as far as it will go.
▶Ensure that the appliance door does not swing
back.
▶Avoid contact with the inside of the appliance door.
ATTENTION!
Objects on the cooking compartment floor will cause
heat to build up. The baking and roasting times will no
longer be correct and the enamel will be damaged.
▶Do not place anything directly on the cooking com-
partment floor.
▶Do not cover the cooking compartment floor with
any sort of foil or greaseproof paper.
The accessories may tip.
▶Do not push the accessories between the shelf posi-
tions.
4.3 Controls
You can use the control panel to configure all functions
of your appliance and to obtain information about the
operating status.
On certain models, specific details such as colour and
shape may differ from those pictured.
All appliance types are operated in an identical man-
ner.
1 2 1
34
1
Touch
fields
These areas are touch-sensitive.
Touch a symbol to select the cor-
responding function.
2
Display The display shows current settings
and selection options, for ex-
ample.
3
Rotary se-
lector
Use the rotary selector to select
the temperature and change addi-
tional settings.
4
Function
selector
Use the function selector to select
the type of heating, cleaning or
the basic settings.
Symbols
Use the symbols to start or stop functions, or to navig-
ate in the menu.

en Familiarising yourself with your appliance
8
Symbol Function
Start
Stop
Pause or end
Cancel
Delete
Confirm or save settings
Selection arrow
Call up additional information
Call up important information and
prompts indicating that an action is
required
Rapid heating with status display
Calling up the automatic pro-
grammes
Calling up individual recipes
Record menu
Edit settings
Enter a name
Delete letters
Childproof lock
Call up the timer menu
Call up the long-term timer
Demo mode
Core temperature probe →Page17
Start the searing function
End the searing function
Network connection (HomeConnect)
Colours
The different colours are used to guide the user in the
relevant setting situations.
Orange ¡Initial settings
¡Main functions
Blue ¡Basic settings
¡Cleaning
White ¡Adjustable values
Appearance
Depending on the situation, the appearance of sym-
bols, values or the entire display changes.
Zoom The appliance zooms in
on the setting that you
have just changed.
If you have set a time and
it is about to run out, it
will appear larger on the
display just before it runs
out, e.g. if you have set
the timer.
Pared-down display After a short while, the ap-
pliance reduces the
amount of information
shown on the display and
only the most important
information remains. This
function is preset. You
can change the setting in
the basic settings.
Position of the function selector
Use the function selector to select the functions or types of heating.
Position Function/type of heating Temperature Application
Zero setting
Light Switch on the interior lighting
Access to other functions, e.g. auto-
matic programmes, individual recipes,
remote start via HomeConnect
1Type of heating used to determine the energy efficiency class in accordance with EN60350-1.

Familiarising yourself with your appliance en
9
Position Function/type of heating Temperature Application
Hot air
50-300°C
Default temperature
170°C
Hot air: For cakes, biscuits and bakes
on more than one level.
The fan in the back wall of the appli-
ance distributes the heat evenly
throughout the cooking compartment.
Eco hot air1
50-300°C
Default temperature
170°C
Energy-saving hot air mode for cakes,
meat, bakes and gratins. Optimal use
is made of the residual heat. Conveni-
ence functions remain switched off,
e.g. the interior lighting. The interior
temperature can only be displayed
while the appliance is heating up. Do
not preheat the appliance.
Make sure that the cooking compart-
ment is cold and that there is nothing
already in there when you place the
food inside. Then start the specified
cooking time. Always keep the appli-
ance door closed when cooking. This
prevents heat loss.
Top + bottom heat
50-300°C
Default temperature
170°C
For cakes in tins or on a baking tray,
bakes, roasts.
Top heat
50-300°C
Default temperature
170°C
Targeted heat from above, for example
grilling fruit flan with meringue.
Bottom heat
50-300°C
Default temperature
170°C
For adding extra baking time (such as
for moist fruit flans), for boiling down,
for dishes in a bain marie.
Hot air + bottom heat
50-300°C
Default temperature
170°C
Additional heat from below for moist
cakes, such as fruit flan.
Full surface grill + air recir-
culation
50-300°C
Default temperature
220°C
Even, all-round heating for meat,
poultry and whole fish.
Full surface grill
50-300°C
Default temperature
220°C
For grilling flat pieces of meat, saus-
ages or fillets of fish. Grilling and
browning.
⁠
Compact grill
50-300°C
Default temperature
220°C
Only the centre part of the grill element
is heated. Energy-saving grilling for
small amounts of food.
⁠
Baking stone function
50-300°C
Default temperature
250°C
Can only be used with the baking
stone and heating element – these are
special accessories.
Baking stone heated from below for
crisp stone-baked pizza, bread or
bread rolls.
⁠
Roaster function
50-220°C
Default temperature
180°C
Can only be used with the roaster, pull-
out system and heating element (spe-
cial accessories).
Heatable cast iron roaster for large
joints of meat, bakes or festive roasts.
⁠
Dough proving
30-50°C
Default temperature 38°C
Proving: For yeast dough and sour
dough
The dough rises considerably more
quickly than at room temperature.
The optimal temperature setting for
yeast dough is 38°C.
1Type of heating used to determine the energy efficiency class in accordance with EN60350-1.

en Familiarising yourself with your appliance
10
Position Function/type of heating Temperature Application
⁠
Defrost
40-60°C
Default temperature 45°C
For vegetables, meat, fish and fruit
Basic settings
Adapt the appliance to individual re-
quirements in the basic settings
→Page22
Pyrolytic self-cleaning
485°C Self-cleaning
1Type of heating used to determine the energy efficiency class in accordance with EN60350-1.
4.4 Standby
The appliance switches to standby mode if no function
is set or the childproof lock is activated. The standby
screen appears if you do not implement any settings
for a long time.
Different displays can be shown in standby mode. The
GAGGENAU logo and the time are preset.
In standby mode, the brightness of the control panel is
reduced. The brightness of the display depends on the
vertical viewing angle. You can change the display and
the brightness at any time in the basic settings
→Page22.
When "Off" is selected for the standby display in the
basic settings, you must turn the function selector to
exit standby mode.
When the door is open, the interior lighting switches off
after a short time.
4.5 Additional information
Press to display additional information, e.g. informa-
tion about the type of heating that is set or the current
cooking compartment temperature.
During continuous operation after heating up, slight
temperature fluctuations are normal.
The appliance displays the symbol for important in-
formation and indicates that an action is required. The
appliance also occasionally displays important informa-
tion about safety and the operating status automatic-
ally. These messages disappear automatically after a
few seconds, or press to confirm the message.
For messages about HomeConnect, the appliance
also displays the HomeConnect status in the sym-
bol.
→"HomeConnect ", Page20
4.6 Cooling fan
The cooling fan switches on when the appliance is in
operation. Depending on the appliance version, hot air
escapes either over or beneath the door.
After removing your food from the appliance, keep the
door closed until the appliance has cooled down. The
appliance door must not be left half open as this may
damage adjacent kitchen units. The cooling fan contin-
ues running for a certain period of time after the appli-
ance has stopped heating and then it switches itself off
automatically.
Do not cover the ventilation slots. Otherwise, the appli-
ance will overheat.
4.7 Rapid heating
With the "Rapid heating" function, your appliance
reaches the temperature you require particularly
quickly in the "top heat", "bottom heat" and "top + bot-
tom heat" types of heating.
To ensure an even cooking result, do not place your
food in the cooking compartment until "Rapid heating"
is complete and the symbol has gone out.
The "Rapid heating" function is set by default in the ba-
sic settings. In the basic settings →Page22, you can
select Rapid heating or Heat-up.
4.8 Automatic switch-off
For your protection, the appliance is equipped with an
automatic switch-off function. The appliance switches
off any heating process after 12hours if the appliance
controls are not used during this time. The display
shows a message.
When programming with the long-term timer, the appli-
ance does not activate the automatic switch-off func-
tion.

Accessories en
11
5 Accessories
Use original accessories. These have been made espe-
cially for your appliance.
Note:Accessories may become deformed if they get
hot. Deformation has no effect on function. As the ac-
cessory cools down, it will regain its original shape.
The accessories supplied may differ depending on the
appliance model.
Accessories Use
Baking tray, enamelled ¡Tray bakes
¡Small baked items
Wire rack ¡Cookware
¡Cake tins
¡Ovenproof dishes
¡Roasting
Glass tray ¡Tray bakes
¡Roasting
Core temperature probe Core temperature probe →Page17 for the
highly precise cooking of:
¡Meat
¡Fish
¡Poultry
¡Bread
5.1 Other accessories
You can purchase other accessories from our cus-
tomer service, specialist retailers or online.
You will find a comprehensive range of products for
your appliance in our brochures and online:
www.gaggenau.com
Accessories vary from one appliance to another. When
purchasing accessories, always quote the exact
product number (E no.) of your appliance.
You can find out which accessories are available for
your appliance in our online shop or from our customer
service.
Other accessories Order number
Fully extendable tele-
scopic pull-out rack
BA016105
Wire rack, chrome-plated,
without opening, with feet
BA036105
Baking tray, enamelled,
15mm deep
BA026115
Glass tray BA046117
Grill tray, enamelled,
30mm deep
BA226105
Heating element for bak-
ing stone and roaster,
230V
BA056115
Heating element for bak-
ing stone and roaster,
400V
BA056125
Baking stone, baking
stone supports and pizza
paddle
BA056133
Note:Order heating ele-
ment separately
Other accessories Order number
Pizza paddle, 2-part set BA020002
Cast aluminium roaster
GN2/3, height 165mm,
non-stick
GN340230
Note:Order heating ele-
ment and pull-out system
separately
5.2 Locking function
The locking function prevents the accessories from tilt-
ing when they are pulled out.
The accessories must be inserted into the cooking
compartment correctly for the tilt protection to work
correctly.
5.3 Sliding accessories into the cooking
compartment
The accessories have a locking function. The accessor-
ies must always be inserted into the cooking compart-
ment the right way round for the tilt protection to work
properly.
ATTENTION!
The accessories may tip.
▶Do not push the accessories between the shelf posi-
tions.

en Before using for the first time
12
1. When inserting the wire rack, ensure that the lug
is facing downwards.
2. Ensure that the safety bar on the wire rack is loc-
ated at the rear and is facing upwards.
6 Before using for the first time
Configure the settings for initial start-up. Clean the ap-
pliance and accessories.
6.1 Initial use
Implement the settings for initial use before using your
appliance.
First read the information under safety →Page2.
The appliance must be installed and connected.
After connecting the appliance to the power supply, the
GAGGENAU logo appears for approx. 30seconds and
then the appliance displays the "Initial settings" menu.
You can configure your new appliance for initial use.
The "Initial settings" menu appears only after the appli-
ance has been connected to a power supply and
switched on for the first time, or if the appliance has
not been connected to a power supply for a number of
days.
You can change all of the settings in the basic settings
→Page22.
Setting the language
Requirement:The display shows the preset language.
1. Use the rotary selector to select the required display
language.
2. Press to confirm.
Setting the time format
Requirement:The display shows the possible formats
24h and AM/PM. 24h is preset.
1. Use the rotary selector to set the required format.
2. Press to confirm.
Set the time
Requirement:The display shows the time.
1. Use the rotary selector to set the required time.
2. Press to confirm.
Setting the date format
Requirement:The display shows the possible formats
D.M.Y, D/M/Y and M/D/Y. D.M.Y is preset.
1. Use the rotary selector to set the required format.
2. Press to confirm.
Setting the date
Requirement:The display shows the preset date. The
daily setting is already active.
1. Use the rotary selector to set the required day.
2. Press to switch to the month setting.
3. Use the rotary selector to set the month.
4. Press to switch to the year setting.
5. Turn the rotary selector to set the year.
6. Press to confirm.
Setting the temperature unit
Requirement:The display shows the possible units °C
and °F. The unit °C is preset.
1. Turn the rotary selector to set the required unit.
2. Press to confirm.
Ending the initial use
Requirement:The display shows "Initial set-up com-
plete".
▶Press ⁠.
aThe appliance switches to standby mode.
aThe display shows the standby screen.
aThe appliance is ready to use.
Heating up the appliance
1. Ensure that there is no leftover packaging in the
cooking compartment.
2. To eliminate the new-appliance smell, heat up the
empty appliance for an hour at 200°C in the Hot air
type of heating with the door closed.
Cleaning accessories
▶Before first use, clean the accessories thoroughly
using hot soapy water and a soft cloth.

Basic operation en
13
7 Basic operation
7.1 Activating the appliance
1. To exit standby mode, open the door and turn the
function selector or touch a touch field.
2. Set the required function.
7.2 Switching on the appliance
1. Use the function selector to set the required type of
heating.
aThe display shows the selected type of heating and
the suggested temperature.
2. If required, use the rotary selector to set the desired
temperature.
aThe display shows the heating symbol ⁠.
aThe bar displays the current heating status.
aOnce the appliance reaches the set temperature, a
signal tone sounds and the heating symbol goes
out ⁠.
Note:If the temperature is set to less than 70°C, the
cooking compartment light will remain switched off.
7.3 Switching off the appliance
▶Turn the function selector to ⁠.
7.4 Switching on the appliance after
automatic switch-off
Requirement:After prolonged operation, the
→"Automatic switch-off", Page10 switches off the ap-
pliance.
1. Turn the function selector to ⁠.
2. Switch the appliance back on again.
8 Timer functions
Your appliance has different timer functions, with which
you can control its operation.
8.1 Overview of the timer functions
Use to select the different timer functions.
Timer function Use
Short-term timer
Cooking time1
Cooking time end1
Stopwatch
1Not available in standby mode.
8.2 Calling up the timer menu
Note:You can call up the timer menu from any operat-
ing mode. The timer menu is not available if you turn
the function selector to in the basic settings.
▶Press ⁠.
aThe display shows the timer menu.
8.3 Exiting the timer menu
▶Press ⁠.
aThe timer menu is closed.
aAny settings that are not saved are lost.
Note:You can exit the timer menu at any time.
8.4 Short-term timer
The short-term timer runs independently of the other
appliance settings. You can enter a maximum of
90minutes.
Setting the short-term timer
1. Press ⁠.
aThe display shows the "Short-term timer" function.
2. Use the rotary selector to set the required cooking
time.
3. Press to start.
aThe appliance closes the timer menu.
aThe time counts down.
aThe display shows and the time that has elapsed.
aA signal tone sounds once the time has elapsed.
4. Press ⁠.
aThe signal tone stops.
Stopping the short-term timer
1. Press ⁠.
2. Touch to select the "Short-term timer" function.
3. Press ⁠.
aThe short-term timer stops.
aThe display shows ⁠.
4. To allow the timer to continue counting down, touch
⁠.
Switching off the timer early
1. Press ⁠.
2. Touch to select the "Short-term timer" function.
3. Press ⁠.
8.5 Stopwatch
The stopwatch runs independently of the other appli-
ance settings. The stopwatch counts from 0seconds
up to 90minutes.
The stopwatch has a pause function. This allows you to
stop the stopwatch from time to time.
Starting the stopwatch
1. Press ⁠.
2. Use to select the "Stopwatch" " function.
3. Press to start.
aThe appliance closes the timer menu.
aThe time counts down.
aThe display shows and the time that has elapsed.

en Long-term timer
14
Stopping the stopwatch
1. Press ⁠.
2. Use to select the "Stopwatch" " function.
3. Press ⁠.
aThe time stops.
aThe display shows ⁠.
4. To continue to run the stopwatch, press ⁠.
aThe time continues to run.
aOnce it has reached 90 minutes, the display flashes
and a signal tone sounds.
5. Press ⁠.
aThe signal tone stops.
Switching off the stopwatch
1. Press ⁠.
2. Use to select the "Stopwatch" " function.
3. Press ⁠.
8.6 Cooking time
When you set the cooking time for your food, the appli-
ance automatically switches off after this time. You can
set a cooking time of between 1minute and
23:59hours.
You can change the type of heating and temperature
while the cooking time counts down.
Setting the cooking time
Requirements
¡The food is in the cooking compartment.
¡You have set the type of heating and the temperat-
ure.
1. Press ⁠.
2. Use to select the "Cooking time" function.
3. Use the rotary selector to set the required cooking
time.
4. Press to start.
aThe appliance starts the cooking time.
aThe appliance closes the timer menu.
aThe display shows the temperature, the operating
mode, the remaining cooking time and the cooking
time end.
aOne minute before the end of the cooking time, the
display zooms in on the cooking time.
aOnce the cooking time has elapsed, the appliance
switches off.
a flashes and a signal tone sounds.
5. Press , open the appliance door or set the func-
tion selector to ⁠.
aThe signal tone stops.
Changing the cooking time
1. Press ⁠.
2. Use to select the "Cooking time" function.
3. Use the rotary selector to change the cooking time.
4. Press to start.
Deleting the cooking time
1. Press ⁠.
2. Use to select the "Cooking time" function.
3. Use to cancel the cooking time.
4. Use to return to normal operation.
Cancelling the entire procedure
▶Turn the function selector to ⁠.
8.7 Cooking time end
You can move the cooking time end to a later time.
Example: It is 14:00. The dish requires a cooking time
of 40minutes. You want the meal to be ready at 15:30.
Enter the cooking time of 40minutes and delay the
cooking-time end until 15:30. The electronics system
calculates the start time. The appliance starts automat-
ically at 14:50 and switches off at 15:30.
Bear in mind that food which spoils easily should not
be left in the appliance for too long.
Delaying the cooking time end
Requirements
¡The food is in the cooking compartment.
¡You have set the type of heating, temperature and
cooking time.
1. Press ⁠.
2. Use to select the "Cooking time end" function.
3. Use the rotary selector to set the required cooking
time end.
If flashes, set the cooking time first.
4. Press to start.
aThe appliance switches to standby.
aThe display shows the operating mode, temperat-
ure, cooking time and cooking time end.
aThe appliance starts at the calculated time and auto-
matically switches off once the cooking time has
elapsed.
aAfter the cooking time has elapsed, flashes and a
signal tone sounds.
5. Press , open the appliance door or set the func-
tion selector to ⁠.
aThe signal tone stops.
Changing the cooking time end
1. Press ⁠.
2. Use to select the "Cooking time end" function.
3. Use the rotary selector to set the required cooking-
time end.
4. Press to start.
Cancelling the entire procedure
▶Turn the function selector to ⁠.
9 Long-term timer
With the appliance in hot air mode, this function keeps
the temperature between 50°C and 230°C.
You can keep food warm for up to 74hours without
having to switch the appliance on or off.
Bear in mind that food which spoils easily should not
be left in the appliance for too long.
9.1 Starting the long-term timer
Requirement:The long-term timer is set to "Available"
in the basic settings →Page22.
1. Turn the function selector to ⁠.

Childproof lock en
15
2. Press ⁠.
aThe display shows the default value 24h at 85°C.
3. Press and use the rotary selector to set the re-
quired cooking time.
4. Press and use the rotary selector to set the re-
quired cooking time end.
5. Press , use the rotary selector to set the required
switch-off date, and press to confirm.
6. Use the rotary selector to set the desired temperat-
ure.
7. Press to start.
aThe appliance starts the long-term timer.
aThe display shows and the temperature.
aThe interior lighting and the display lighting are
switched off.
aThe control panel is locked.
aIf you touch the control panel, no signal tone
sounds.
aOnce the time has elapsed, the appliance no longer
heats up and the display goes out.
8. Turn the function selector to ⁠.
9.2 Switching off the long-term timer
▶Turn the function selector to ⁠.
10 Childproof lock
Activate the childproof lock so that children cannot ac-
cidentally switch the appliance on or change the set-
tings.
If the childproof lock is switched on and the power
fails, the childproof lock can be deactivated when the
power comes back on.
10.1 Activating the childproof lock
Requirements
¡You can set the childproof lock to "available" in the
basic settings →Page22.
¡The function selector is set to ⁠.
▶Press and hold for approx. 6seconds.
aThe display shows the standby screen and ⁠.
aThe childproof lock is activated.
10.2 Deactivating the childproof lock
Requirement:The function selector is set to ⁠.
1. Press and hold for approx. 6seconds.
aThe childproof lock is deactivated.
2. Set the appliance as normal.
11 Searing function
With the searing function, the appliance heats up at full
capacity for approx. 3minutes. You can use this to
sear steaks, for example.
To use the searing function, you will need a roaster,
pull-out system and heating element – these are spe-
cial accessories.
11.1 Starting the searing function
Requirement:The roaster function type of heating
has been set.
▶Press ⁠.
aThe searing function starts.
Tip:You can also set the searing function to start sev-
eral times consecutively.
11.2 Ending the searing function early
▶Press ⁠.
12 Automatic programmes
You can prepare a wide range of food using the auto-
matic programmes. The appliance selects the optimal
setting for you.
12.1 Information about the settings for the
automatic programmes
Observe the instructions for the settings of the auto-
matic programmes.
¡The cooking result depends on the quality of the
food and the size and type of cookware. For an op-
timal cooking result, only use food that is in good
condition and meat that is chilled to refrigerator tem-
perature. For frozen food, only use food straight out
of the freezer.
¡The food is divided into categories. One or more
dishes are listed for each category. The first position
on the display shows the last selected category.
¡The automatic programme suggests a temperature,
type of heating and cooking time.
¡For some food, the appliance prompts you to enter
the weight. It is not possible to set weights outside
the preprogrammed weight range.
¡For some dishes, you are asked to enter the desired
level of browning, the thickness of the food and the
cooking level of the meat or vegetables.
¡For some food, preheat the empty cooking compart-
ment. Only place the food in the cooking compart-
ment once the preheating is complete and a mes-
sage is shown on the display.

en Individual recipes
16
¡Your preferred settings are shown next time as a
suggestion.
¡For some recipes, you need the core temperature
probe. Use the core temperature probe for these re-
cipes. →Page17
¡To achieve good results, the cooking compartment
must not be too hot for the type of food you have
selected. If the cooking compartment is too hot, the
display shows a corresponding notification. Allow
the appliance to cool and then try again.
12.2 Setting the food
Note:The appliance guides you through the entire set-
ting process. Follow the instructions in the display.
1. Turn the function selector to ⁠.
2. Press ⁠.
3. Press to confirm.
4. Use the rotary selector to select the required cat-
egory.
5. Use the rotary selector to select the food that you
require.
6. For many dishes, you can change the settings to
suit your needs.
For some dishes, you must set the weight.
aThe display shows the possible settings.
7. Press ⁠.
aThe display shows information about the accessor-
ies and preparation.
8. Press to confirm the required settings.
9. Follow the information on the display.
aOnce the cooking time has elapsed, a signal tone
sounds.
aThe appliance stops heating.
Note:If you open the appliance door during an auto-
matic programme, this affects the cooking result. Open
the appliance door only briefly. The appliance interrupts
the automatic programme and continues to run when
you close the appliance door.
Adding extra cooking time
After the cooking time has ended, you can leave some
dishes to continue cooking if you are not satisfied with
the cooking result.
Requirement:A query appears on the display asking if
you want to continue cooking.
1. Press to confirm.
2. Select a single or double cooking time as required.
3. Press to start.
4. If the "Continue cooking" function has ended, turn
the function selector to ⁠.
Changing and cancelling the programme
Note:Once you have started the programme, you can
no longer change the settings.
▶Turn the function selector to ⁠.
aThe appliance ends the programme.
12.3 Calling up the last automatic
programmes used
The appliance saves the last 5 dishes with the settings
that you selected. You have the option to save these
dishes with the selected settings as individual recipes.
Note:If you save the settings for the individual recipe
using the "Last automatic programmes" function, you
can no longer retroactively change the settings for indi-
vidual recipes.
→"Individual recipes", Page16
1. Turn the function selector to ⁠.
aThe display shows ⁠.
2. Press ⁠.
3. Use the rotary selector to select "Last automatic pro-
grammes".
4. Press to confirm.
5. Use the rotary selector to select the food that you
require.
6. Enter and save a name for the dish. →Page17
13 Individual recipes
You have the option to save up to 50 individual recipes
with a name so that, if required, you can access the re-
cipe quickly and easily. You can record a recipe.
13.1 Recording a recipe
It is possible to set and record up to 5 phases consec-
utively.
1. Turn the function selector to ⁠.
2. Press ⁠.
3. Use the rotary selector to select "Individual recipes".
4. Press to confirm.
5. Use the rotary selector to select a free memory loc-
ation.
6. Press ⁠.
7. Use the function selector to set the required type of
heating and the rotary selector to set the required
temperature.
aThe appliance records the cooking time.
8. Insert the core temperature probe into the socket in
the cooking compartment and enter the core tem-
perature for a phase →Page16.
9. To record another phase, set the function selector
to the required type of heating and use the rotary
selector to set the required temperature.
aA new phase starts.
10. When the dish has reached the required cooking
result, press ⁠.
11. Enter the name under "ABC".
→"Entering a name", Page17
The appliance only starts recording a phase once it
has reached the set temperature.
Each phase must last at least one minute.
During the first minute of a phase, you can change
the type of heating or the temperature.
Entering the core temperature for a phase
1. Insert the core temperature probe →Page17 into
the socket in the cooking compartment.
2. Set the type of heating and the temperature.
3. Press ⁠.
4. Use the rotary selector to set the desired core tem-
perature and press to confirm.

Core temperature probe en
17
13.2 Programming a recipe
1. Turn the function selector to ⁠.
2. Press ⁠.
3. Use the rotary selector to select "Individual recipes"
and press to confirm.
4. Use the rotary selector to select a free memory loc-
ation.
5. Press ⁠.
6. Enter the name under "ABC".
→"Entering a name", Page17
7. Use to select the first phase.
aThe display shows the type of heating and temperat-
ure that are selected at the start.
8. If required, use the rotary selector to change the
type of heating and the temperature.
9. Insert the core temperature probe into the socket in
the cooking compartment and enter the core tem-
perature for a phase →Page17 or select the time
setting using ⁠.
You cannot enter the cooking time for phases with a
programmed core temperature.
10. Use the rotary selector to set the required cooking
time.
11. If the preparation is complete, use to finish mak-
ing entries or use to select the next phase.
12. Use to save or to cancel, and exit the menu.
Entering the core temperature for a phase
Note:You cannot enter the cooking time for phases
with a programmed core temperature.
1. Press to select the next phase.
2. Set the type of heating and the temperature.
3. Press ⁠.
4. Use the rotary selector to set the desired core tem-
perature and press to confirm.
13.3 Entering a name
1. Enter a name for the recipe under "ABC".
2. Use the rotary selector to select the letters.
A new word always begins with a capital letter.
Latin characters, certain special characters and
numbers are available.
3. Briefly press to position the cursor to the right.
4. Press and hold to switch to umlauts and spe-
cial characters.
5. Press twice to insert a break.
6. Briefly press to position the cursor to the right.
7. Press and hold to switch to normal characters.
8. Press twice to insert a break.
9. Press to delete a letter.
10. Use to save or to cancel, and exit the menu.
13.4 Starting a recipe
1. Turn the function selector to ⁠.
2. Press ⁠.
3. Use the rotary selector to select "Individual recipes"
and press to confirm.
4. Use the rotary selector to select the desired recipe.
5. If the recipe contains a saved core temperature, in-
sert the core temperature probe →Page17.
6. Press to start.
The cooking time does not start counting down until
the appliance has reached the set temperature.
You can use the rotary selector to change the tem-
perature while the recipe is in progress. Changing
the temperature does not change the saved recipe.
aThe operation begins.
aYou can see the cooking time counting down.
aThe display shows the settings for the phases on
the display bar.
13.5 Changing a recipe
You can change the settings for a recorded or pro-
grammed recipe.
1. Turn the function selector to ⁠.
2. Press ⁠.
3. Use the rotary selector to select "Individual recipes"
and press to confirm.
4. Use the rotary selector to select the desired recipe.
5. Press ⁠.
6. Use to select the required phase.
aThe display shows the programmed type of heating,
temperature and cooking time.
7. If required, you can use the rotary selector or func-
tion selector to change the settings.
8. Use to save or to cancel, and exit the menu.
13.6 Deleting a recipe
1. Turn the function selector to ⁠.
2. Press ⁠.
3. Use the rotary selector to select "Individual recipes"
and press to confirm.
4. Use the rotary selector to select the desired recipe.
5. Use to delete the recipe.
6. Press to confirm.
14 Core temperature probe
The core temperature probe makes it possible to cook
with exact precision. The core temperature probe
measures the temperature at 3 measuring points inside
the food. When the required core temperature is
reached, the appliance automatically switches off, en-
suring that all food is cooked perfectly.
WARNING‒Risk of burns!
The cooking compartment and the core temperature
probe become very hot.
▶Use oven gloves when inserting and removing the
core temperature probe.
ATTENTION!
Temperatures above 250°C damage the core temper-
ature probe.
▶Only use the core temperature probe in your appli-
ance at a maximum temperature of 250°C.
▶Do not use the core temperature probe with the full
surface grill or compact grill types of heating.
▶Before using full surface grill or compact grill, re-
move the core temperature probe from the cooking
compartment.

en Core temperature probe
18
▶When using the core temperature probe with the full
surface grill type of heating and air recirculation, set
the temperature to a maximum of 250°C.
WARNING‒Risk of electric shock!
An incorrect core temperature probe may damage the
insulation.
▶Only use the core temperature probe that is suitable
for this appliance.
ATTENTION!
Moisture may damage the core temperature probe.
▶Do not clean the core temperature probe in the
dishwasher.
Only use the core temperature probe supplied. The
core temperature probe is available as a spare part
from customer service or the online shop.
If you use the core temperature probe, never place the
food on the top shelf level.
After use, always remove the core temperature probe
from the cooking compartment. Never store the core
temperature probe in the cooking compartment.
After each use, clean the core temperature probe with
a damp cloth.
14.1 Estimated cooking time
After preheating, if the appliance has a temperature
setting above 100°C and the core temperature probe
is inserted, the display shows an estimated cooking
time approx. 5 to 20minutes into the cooking time. The
appliance continuously updates the estimated cooking
time.
The longer the cooking process lasts, the more precise
the estimated cooking time becomes. Do not open the
appliance door; this distorts the estimated cooking
time.
The display shows the estimated cooking time in nor-
mal operation and in the automatic programme.
Press to display the current core temperature.
To display the current core temperature instead of the
estimated cooking time, change the settings in the ba-
sic settings →Page22.
The display shows "<15°C" for the current core tem-
perature at the beginning of the cooking time for ap-
prox.3 to 4minutes.
The measurable range is 15°C to 99°C. Outside of
the measurable range, the display shows "<15°C" or "-
-°C" for the current core temperature.
If you leave food in the cooking compartment for some
time after cooking, the core temperature will continue
to rise somewhat due to the residual heat in the cook-
ing compartment.
If you set programmes with the core temperature probe
and the cooking timer at the same time, the appliance
switches off whichever programme reaches the entered
value first.
14.2 Core temperature guideline values
The following overview provides you with guideline val-
ues for the core temperature. The guideline values de-
pend on the quality and composition of the food.
Only use fresh food that has not been frozen. For hy-
giene reasons, ensure that critical foods such as fish
and game reach a core temperature of at least 62°C
to 70°C and poultry and minced meat 80°C to
85°C.
Food Core temperature
guideline value in
°C
Beef
Sirloin, fillet of beef, entrecôte,
very rare
45-47
Sirloin, fillet of beef, entrecôte,
rare
50-52
Sirloin, fillet of beef, entrecôte, me-
dium rare
58-60
Sirloin, fillet of beef, entrecôte,
well done
70-75
Roast beef 80-85
Pork
Joint of pork 72-80
Loin of pork, medium rare 65-70
Loin of pork, well done 75
Meatloaf 85
Fillet of pork 65-70
Veal
Joint of veal, well done 75-80
Breast of veal, stuffed 75-80
Saddle of veal, medium rare 58-60
Saddle of veal, well done 65-70
Fillet of veal, rare 50-52
Fillet of veal, medium rare 58-60
Fillet of veal, well done 70-75
Game
Saddle of venison 60-70
Leg of roe venison 70-75
Venison loin steaks 65-70
Saddle of hare, saddle of rabbit 65-70
Poultry
Chicken 90
Guinea fowl 80-85
Goose, turkey, duck 85-90
Duck breast, medium rare 55-60
Duck breast, well done 70-80
Ostrich steak 60-65
Lamb
Leg of lamb, medium rare 60-65
Leg of lamb, well done 70-80
Saddle of lamb, medium rare 55-60
Saddle of lamb, well done 65-75

Core temperature probe en
19
Food Core temperature
guideline value in
°C
Mutton
Leg of mutton, medium rare 70-75
Leg of mutton, well done 80-85
Saddle of mutton, medium rare 70-75
Saddle of mutton, well done 80
Fish
Fillet 62-65
Whole 65
Terrine 62-65
Miscellaneous
Bread 96
Pâté 72-75
Terrine 60-70
Foie gras 45
Reheating food 75
14.3 Inserting the core temperature probe
into the food
1. Insert the core temperature probe fully into the food.
2. Do not insert the core temperature probe into the
fat.
3. Ensure that the core temperature probe is not
touching any cookware or any bones.
4. Place the food in the cooking compartment.
Inserting the core temperature probe into meat
1. Insert the core temperature probe at the thickest
point on the side as far as it will go into the meat.
2. If there is more than one piece of meat, insert the
core temperature probe into the middle of the thick-
est piece.
Inserting the core temperature probe into
poultry
1. Insert the core temperature probe as far as it will go
into the thickest point in the breast.
2. Depending on its composition, insert the core tem-
perature probe into the poultry crossways or length-
ways.
3. With poultry, ensure that the tip of the core temper-
ature probe does not protrude into the cavity in the
middle of the bird.
Inserting the core temperature probe into fish
1. Insert the core temperature probe behind the head
as far as it will go towards the spine.
2. Place the whole fish onto the wire rack and prop it
up in the swimming position using half a potato.
14.4 Turning the food
1. Do not pull out the core temperature probe when
turning the food.
If you pull out the core temperature probe during
operation, the appliance resets all settings. You
must reset the settings.
2. Turn the food.

en HomeConnect
20
3. Once you have turned the food, check that the core
temperature probe is correctly positioned in the
food.
14.5 Setting the core temperature probe
ATTENTION!
The heat of the grill heating element may damage the
core temperature probe.
▶Ensure that the distance between the grill heating
element and the core temperature probe and the
cable of the core temperature probe is a few centi-
metres. In doing so, ensure that the meat can ex-
pand during the cooking process.
You may damage the cable of the core temperature
probe with the appliance door.
▶Do not trap the cable of the core temperature probe
in the appliance door.
1. Slide the food into the cooking compartment with
the core temperature probe inserted.
2. Insert the core temperature probe into the socket in
the cooking compartment.
3. Close the appliance door.
4. Turn the function selector to the required type of
heating.
5. Use the rotary selector to set the cooking compart-
ment temperature.
6. Press ⁠.
7. Use the rotary selector to set the desired core tem-
perature and press to confirm.
‒Ensure that the set core temperature is higher
than the current core temperature.
You can change the set core temperature at any
time.
aThe appliance heats up using the set type of heat-
ing.
aThe display shows the current core temperature
and, beneath it, the set core temperature.
aOnce the food reaches the core temperature that
has been set, a signal tone sounds.
aThe appliance ends the cooking process automatic-
ally.
8. Press to confirm.
9. Turn the function selector to ⁠.
Changing the set core temperature
1. Press ⁠.
2. Use the rotary selector to change the set core tem-
perature for the food and press to confirm.
Deleting the set core temperature
1. Press ⁠.
2. Use to delete the set core temperature.
aThe appliance continues heating in normal cooking
operation.
15 HomeConnect
This appliance is network-capable. Connecting your ap-
pliance to a mobile device lets you control its functions
via the HomeConnect app, adjust its basic settings
and monitor its operating status.
The HomeConnect services are not available in every
country. The availability of the HomeConnect function
depends on the availability of HomeConnect services
in your country. You can find information about this at:
www.home-connect.com.
The HomeConnect app guides you through the entire
login process. Follow the instructions in the HomeCon-
nect app to configure the settings.
Tips
¡Please consult the documents supplied by
HomeConnect.
¡Please also follow the instructions in the HomeCon-
nect app.
Notes
¡Please note the safety precautions in this instruction
manual and make sure that they are also observed
when operating the appliance via the HomeCon-
nect app.
→"Safety", Page2
¡If you want to operate the appliance via the
HomeConnectapp, you must activate the remote
control function in the HomeConnectsettings first.
This function is for your own safety. Turn the func-
tion selector on the appliance to the light position
to enable the remote control function.
¡Operating the appliance on the appliance itself al-
ways takes priority. During this time it is not possible
to operate the appliance using the HomeConnect
app.
¡In networked standby mode, the appliance requires
a maximum of2W.
15.1 Setting up HomeConnect
Requirements
¡The appliance is connected to the power supply and
is switched on.
¡You have a mobile device with a current version of
the iOS or Android operating system, e.g. a smart-
phone.
¡The mobile device and the appliance are within
range of your home network's Wi-Fi signal.
1. Download the HomeConnect app.
2. Open the HomeConnect app and scan the follow-
ing QR code.