Gaggenau EB 388 610 User manual

Gaggenau
Installation instructions
Instructions d’installation
Instrucciones de instalación
EB 388 610
Oven
Four
Horno

2
Installation instructions 3
Instructions d’installation 11
Instrucciones de instalación 19

3
Table of Contents Installationinstructions
Signal Words for Safety and Best Use 4
IMPORTANT SAFETY INSTRUCTIONS 5
State of California Proposition 65 5
Appliance Handling Safety 5
Safety Codes and Standards 5
Electric Safety 5
Related Equipment Safety 6
Transport 6
Before You Begin 7
Parts Included 7
Tools and Parts Needed 7
Power Requirements 7
Preparing kitchen units 7
Dimensions and Cabinet Requirements 8
Removing Packaging 9
Install Appliance 9
Removal 9
Electrical Installation 10
Check the Installation 10
Customer service 10
Additional information on products, accessories,
replacement parts and services can be found at
www.gaggenau.com and in the online shop
www.gaggenau-eshop.com

4
Signal Words for Safety and
Best Use
9WARNING
This indicates that death or serious injuries may
occur as a result of non-observance of this
warning.
9CAUTION
This indicates that minor or moderate injuries
may occur as a result of non-observance of this
warning.
NOTICE: This indicates that damage to the appliance
or property may occur as a result of non-compliance
with this advisory.
Note: This alerts you to important information and/or
tips.

5
5
9IMPORTANT SAFETY INSTRUCTIONS
READ AND SAVE THESE INSTRUCTIONS
IMPORTANTSAFETYINSTRUCTIONS READANDSAVETHESEINSTRUCTIONS
WARNING
If the information in this manual is not followed
exactly, fire or shock may result causing property
damage or personal injury.
WARNING
Do not repair, replace or remove any part of the
appliance unless specifically recommended in the
manuals. Improper installation, service or
maintenance can cause injury or property damage.
Refer to this manual for guidance. All other servicing
should be done by a qualified technician.
State of California
Proposition 65 Warnings
WARNING
This product contains one or more chemicals known
to the State of California to cause cancer.
WARNING
This product contains one or more chemicals known
to the State of California to cause birth defects or
other reproductive harm.
Appliance Handling Safety
Unit is heavy and requires at least two people or
proper equipment to move.
Do not lift appliance by door handle.
Hidden surfaces may have sharp edges. Use caution
when reaching behind or under appliance.
Safety Codes and Standards
This appliance complies with the latest version of one
or more of the following standards:
▯CAN/CSA C22.2 No. 61 - Household Cooking
Ranges
▯UL 858 - Household Electric Ranges
▯CAN/CSA C22.2 No. 150 - Microwave Ovens
▯UL 923 - Microwave Cooking Appliances
▯CSA C22.2 No. 64 - Household Cooking and
Liquid-Heating Appliances
▯UL 1026 - Electric Household Cooking and Food
Serving Appliances
It is the responsibility of the owner and the installer to
determine if additional requirements and/or standards
apply to specific installations.
Electric Safety
Before you plug in an electrical cord, be sure all
controls are in the OFF position.
If required by the National Electrical Code (or
Canadian Electrical Code), this appliance must be
installed on a separate branch circuit.
Installer - show the owner the location of the circuit
breaker or fuse. Mark it for easy reference.
Important - save these instructions for the local
electrical inspector’s use..
Before installing, turn power OFF at the service panel.
Lock service panel to prevent power from being
turned ON accidentally.
Refer to data plate for more information. See “Data
Plate” under “Service” for data plate location.
Be sure your appliance is properly installed and
grounded by a qualified technician. Installation,
electrical connections and grounding must comply
with all applicable codes.

6
9IMPORTANT SAFETY INSTRUCTIONS
READ AND SAVE THESE INSTRUCTIONS
6
Related Equipment Safety
Remove all tape and packaging before using the
appliance. Destroy the packaging after unpacking the
appliance. Never allow children to play with packaging
material
Never modify or alter the construction of the
appliance. For example, do not remove leveling legs,
panels, wire covers or anti-tip brackets/screws.
Transport
To avoid damage to the oven vent, use the transport
method shown in the picture below.

7
Before You Begin
Parts Included
▯Built-in oven
▯2 Torx screws
▯Shielding plate
Tools and Parts Needed
▯Screwdriver Torx T20
▯Pencil
▯Jigsaw
▯Tape Measure
▯Spirit level
Power Requirements
The outlet must be properly grounded in accordance
with all applicable codes.
Preparing kitchen units
Kitchen units must be temperature-resistant up to
195° F (90 °C) and adjoining furniture frontages up
to 160° F (70 °C).
The wall socket must be outside the built-in niche.
Cut recesses on the furniture before inserting the
appliance. Remove any shavings, as these can affect
the operation of electrical components.
Secure unsecured furniture items to the wall using a
commercially available bracket.
Only install the appliance so high that accessories
can be removed with ease.

8
Dimensions and Cabinet
Requirements
The exhaust air should not be vented into a wall, a
ceiling, or a concealed space of a building.
PLQ












 PP




 

 

 

 









9
Removing Packaging
NOTICE: To prevent damage to your floor keep the
unit in its packaging base until ready to be placed in
the cabinet opening. Do not slide the unit across the
flooring.
1Cut straps on outside of box.
2Remove cardboard box.
3Remove all top and side cardboard and Styrofoam
braces.
4Place oven in front of cabinets where it is to be
installed.
5Remove the securing clip from the handle and the
adhesive tapes that protect the door during
transport.
Install Appliance
Note: The appliance is heavy. It is advisable to insert
it together with a second person.
NOTICE: Before installing the oven, be sure to verify
the cabinet dimensions and electrical connections.
Installing under a worktop:
Before installing the oven, fit the included shielding
plate on the bottom edges of the worktop.
1Push the appliance fully into the kitchen unit.
Do not kink or jam connecting cables or route
them over sharp edges.
2Align the appliance in the center.
3Use a spirit level to align the appliance exactly
horizontally.
4Fasten the appliance with the included screws.
Removal
1Disconnect the appliance from the power supply.
2Undo the fastening screws.
3Raise the appliance slightly and pull it out
completely.

10
Electrical Installation
9CAUTION
Local Codes may vary; installation, electrical
connections and grounding must comply with all
applicable local codes.
For installation in Canada only:
When you install the appliance, you need a special
fuse-box with circuit breakers which have to be
connected between the appliance and the socket. By
installing the fuse-box and circuit breakers please
make sure that you have installed the right breakers in
each circuit you need. Please contact dealer or
electrician.
Follow the information on the enclosed wiring diagram
for connection details.
1Connect red wire from oven to red electrical
supply wire (hot wire).
2Connect black wire from oven to black electrical
supply wire (hot wire).
3Connect yellow/green ground oven wire to bare
ground electrical supply wire.
Attach flexible conduit to the junction box.
To facilitate serviceability, the flex conduit must not be
shortened and should be routed to allow for temporary
removal of the oven.
Check the Installation
9WARNING
Before you plug in an electrical cord or turn on
power supply, make sure all controls are in the
OFF position.
Switch on the circuit breaker.
Verify that elements function properly.
Customer service
If your appliance needs repairs, our customer service
is there for you. We work hard to help solve problems
quickly and without unnecessary service calls, getting
your appliance back up and running correctly in the
least amount of time possible.
When you call, please indicate the product number
(E-Nr.) and serial number (FD-Nr.) so that we can
support you in a qualified manner. You will find the
type plate with these numbers on the bottom of the
appliance. To avoid having to search for a long time
when you need it, you can enter your appliance data
and the customer support telephone number here.
Please read the use and care instructions provided
with your appliance. Failure to do so may result in an
error in using the appliance. This could result in a
service call that instead of fixing a mechanical issue is
only needed for customer education. Such calls are
not covered by the appliance warranty.
Please find the contact data of all countries in the
enclosed customer service list.
To book an engineer visit and product advice
You can rely on the manufacturer’s expertise. Rest
assured that the repair will be handled by trained
service technicians who have the original replacement
parts for your appliance.
E-Nr. FD-Nr.
Customer Service O
USA 877 442 4436
toll-free
CANADA 800 828 9165