Gainsborough K143 User manual

Solar Bird Feeder Stake
K143 v001: 23/08/21
Please read and retain these instructions for future reference
ALWAYS POSITION IN DIRECT SUNLIGHT
ASSEMBLY INSTRUCTIONS / INSTRUCTIONS FOR USE:
Unpack the components carefully. Please check all parts have been removed from the packaging.
Parts
Dimensions
(H) 120 x (W) 43 x (D) 17cm
•VERSATILE BIRD FEEDER STAKE, COMES WITH A MESH
BIRD FEEDING BASKET IDEAL FOR SEEDS AND NUTS
AND A PLASTIC DISH FOR WATER, SITTING ON TOP OF
THE STAKE IS A CLASSIC COACH STYLE SOLAR LANTERN
THAT AUTOMATICALLY ILLUMINATES AT DUSK
•Solar panel 3pc 1V 40MA
Battery 1x AA 1.2v 200Mah, Ni-MH, Rechargeable
Assembly

Solar Bird Feeder Stake K143 Instructions for Use
Please read and retain these instructions for future reference v001: 23/08/21
Before using first time
Remove the protective film from the solar panel.
CHARGING AND OPERATION:
1. There is an “on/off” switch at the back of the solar panel case. Twist the lamp shade and find the
switch then push the switch to “on” position. Then replace the cover and position the light in a
sunny location. Charge the solar product by placing it under direct sunlight for at least 8 hours.
2. The light will work automatically. It will charge under direct sunlight during the daytime and
illuminate at night.
3. Leave the switch to “ON” position.
NOTE: In order to test the lights simply cover the solar panel with your hand and the light should turn on
automatically.
Find an ideal Place for the Solar Light.
Place the solar light in an area where it will receive direct sunlight for at least 8 hours per day. The number of
hours the light will illuminate is directly proportional to the hours of sunlight it receives. If the light is placed
in a shaded area, it will not be able to fully charge and its illumination time will be limited. Do not place the
light near other outdoor lighting like porch or streetlights. These may fool the sensor and keep the light from
coming on, or cause it to turn off automatically
To easily insert stakes into the ground, it is recommended to wet the ground first. To avoid damaging garden
stakes when inserting into the ground, select a spot in soft, rock-free soil. Insert the base of the stake first
then gently insert the rest of the stake into the base. DO NOT push directly against the solar cell or the
ornament housing containing the actual LED light.

Solar Bird Feeder Stake K143 Instructions for Use
Please read and retain these instructions for future reference v001: 23/08/21
Replacing Battery
If the light stops working after it has been used for a long time (about 18 months), the battery may be
beyond its lifespan. Please open the cover of the battery compartment to replace the rechargeable battery.
Step 1: Unscrew the battery compartment cover by using a Phillips head screwdriver (not included).
Step 2: Remove the exhausted battery and install 1x new AA rechargeable battery according to the +/-
polarity as beside image. Open the compartment carefully and ensure that wire inside the battery terminals
is not damaged.
Step 3: Replace battery compartment cover, screw it back into position and make sure is properly sealed.
Step 4: Charge the new battery for 8 hours.
Care and Maintenance Recommendations
1. Clean solar panel with a soft sponge every couple of weeks.
2. Make sure all connectors are still tight and no water getting in.
BATTERIES
•Keep batteries away from children and pets.
•Do not mix used and new batteries.
•Remove the batteries if left for long periods.
•Never dispose of batteries in a fire.
•Battery disposal, spent or expired batteries must be properly disposed of and recycled in compliance
with local regulations. For detailed information, contact your local authority.
•Follow the battery manufacturer’s safety, usage, and disposal instructions.
DISPOSAL
•Coopers of Stortford use recyclable or recycled packaging where possible.
•Please dispose of all packaging, paper, cartons, packaging in accordance with your local
recycling regulations.
•Plastics, polybags –this is made from the following recyclable plastic.
Code &
Symbol
Type of
Plastic
Polypropylene
Commonly
used for
Microwaveable food containers, yoghurt pots, butter tubs,
disposable plates and cups
Notes
Commonly recycled and collected from household recycling
bins (packaging tape itself not recyclable but does not interfere
with cardboard)
•At the end of the product’s lifespan please check with your local
council authorised household waste recycling centre for disposal.