Gainsborough Elephant H306 User manual

Elephant Solar Light
H306 v001: 20/11/20
Please read and retain these instructions for future reference
ALWAYS POSITION IN DIRECT SUNLIGHT
ASSEMBLY INSTRUCTIONS / INSTRUCTIONS FOR USE:
Unpack the components carefully. Please check all parts have been removed from the packaging.
There are metal tubes on each leg to insert ground stakes where required. To easily insert stakes into the
ground, it is recommended to wet the ground first. To avoid damaging garden stakes when inserting into the
ground, select a spot in soft, rock-free soil. Insert the base of the stake first then gently insert the rest of the
stake into the base. DO NOT push directly against the solar cell or the ornament housing containing the
actual LED light.
Find an ideal Place for the Solar Light.
Place the solar light in an area where it will receive direct sunlight for at least 8 hours per day. The number of
hours the light will illuminate is directly proportional to the hours of sunlight it receives. If the light is placed
in a shaded area, it will not be able to fully charge and its illumination time will be limited. Do not place the
light near other outdoor lighting like porch or streetlights. These may fool the sensor and keep the light from
coming on, or cause it to turn off automatically
Dimensions
38 x23 x38cm
Material: Metal and plastic
•A REAL STATEMENT PIECE
•THE ELEPHANT HAS BEEN CRAFTED WITH A
SCROLL EFFECT ACROSS ITS BODY WHICH AT
NIGHT WHEN LIT UP CREATES A BEAUTIFUL
PATTERN ACROSS THE GROUND
•WHITE LED (not replaceable)
•2 GROUND STAKES INCLUDED TO SECURE HIM
INTO THE GROUND
•SOLAR POWERED
•SIMPLE ON/ OFF SWITCH FOR THE LIGHTS
POSITIONED ON THE POLE
Battery: 1x Ni-MH AA 600mAh 1.2V
1x 7 coloured LED Lights (not replaceable)

Elephant Solar Light H306 Instructions for Use
Please read and retain these instructions for future reference v001: 20/11/20
CHARGING AND OPERATION:
1. Set button which is located underneath the solar panel
to “ON” position for charging and charge by placing it
under direct sunlight for at least 8 hours.
2. The light will work automatically. It will charge under
direct sunlight during the day time and illuminate at
night.
NOTE: In order to verify that the button is correctly in the “
ON ” position, cover the solar panel with your hand and
light should turn “ON” automatically.
MAINTENANCE AND TROUBLESHOOTING:
1. Make sure the switch is set to “ON” position.
2. Keep the solar panel clean.
3. If solar product does not light up after it has been used for around 8 –12 months, replace the
rechargeable batteries as they may be weak or worn out. (Battery 1pc AA 1.2v 600Mah, Ni-MH,
Rechargeable–Same equivalent type as recommended must be used).
BATTERY REPLACEMENT:
Step1: The battery compartment is located underneath the solar panel. Remove battery compartment cover
by using a small Phillips head screwdriver (not included).
Step2: Remove the exhausted battery and install 1pc new AA rechargeable battery according to the polarity
symbol indicated on the battery compartment. Open the compartment carefully and ensure that welding
wires inside the battery terminals are not damaged.
Step3: Replace battery compartment cover, screw it back into position and make sure it is properly sealed.
Care and Maintenance Recommendations
1. Clean solar panel with a soft sponge every couple of weeks.
2. Make sure all connectors are still tight and no water getting in.
3. During the winter if you can bring it inside and give a good clean ready for next year.
BATTERIES
•Keep batteries away from children and pets.
•Do not mix used and new batteries.
•Remove the batteries if left for long periods.
•Never dispose of batteries in a fire.
•Battery disposal, spent or expired batteries must be properly disposed of and recycled in compliance
with local regulations. For detailed information, contact your local authority.
•Follow the battery manufacturer’s safety, usage, and disposal instructions.
ON/OFF SWITCH

Elephant Solar Light H306 Instructions for Use
Please read and retain these instructions for future reference v001: 20/11/20
DISPOSAL
•Coopers of Stortford use recyclable or recycled packaging where possible.
•Please dispose of all packaging, paper, cartons, packaging in accordance with your local
recycling regulations.
•Plastics, polybags –Contains the following recyclable plastic.
Code & Symbol
Type of Plastic
Polystyrene
Polysilicon (solar panel)/ABS
Commonly used for
Insulation boxes, water cups, protective
packaging inserts, take away containers
CD’s, crisp packets, various flexible
packaging, baby bottles, sunglass lenses
Notes
Not commonly recycled but waste
management
centres will recycle it.
Not often or widely recycled
•At the end of the product’s lifespan please check with your local council authorised household waste
recycling centre for disposal.