Cut solid foods into small pieces for easier blending or chopping.
The Immersion Blender is equipped with thermal protection from
high operating temperatures. Should the Immersion Blender
suddenly stop during use, unplug it and allow 10 minutes to
automatically reset.
To avoid splashing, insert the Hand Blender into the mixture
before pressing the Power button, and release the button before
pulling the Immersion Blender out of the mixture.
When blending in a saucepan on a cooktop, remove the pan from
the heating element to protect the Immersion Blender from
overheating.
For best blending, hold the Immersion Blender at an angle and
gently move up and down within the container. Do not put
pressure on the mixture with the Immersion Blender.
To prevent overflow, allow room in the container for the mixture to
rise when using the Immersion Blender.
Do not let the Immersion Blender sit in a hot pan on the cooktop
while not in use.
Remove hard items, such as fruit pits or bones, from the mixture
before blending or chopping to help prevent damage to the
blades.
Do not use your Immersion Blender to process coffee beans or
hard spices such as nutmegs. Processing these foods could
damage the blades of the Immersion Blender.
Do not put the pitcher or chopper bowl in the microwave oven.
The stainless steel Whisk may scratch or mark non-stick coatings;
avoid using the whisk in non-stick cookware.
To prevent splattering, use the Whisk attachment in deep
containers or pans.
1. Insert the Chopper blade into the Chopper bowl.
2. Fit the chopper blade over the pin in the bowl.
3. Add small pieces of foods to the bowl.
Note: Remove any bones from meat or fish and cut food into bit
sized pieces.
4. Fit the chopping bowl cover, turn and lock into position.
5. Insert the motor unit into the chopper cover and twist to lock into
position.
6. Hold the bowl steady and press the ON button, or for more of a
rough chop press the turbo button in short bursts to achieve a
pulse action.
Note: Hold the motor body with one hand and the Chopper bowl
with the other while processing.
7. When the desired results have been achieved, twist the motor
body to unlock and lift the motor body off the chopping bowl.
Twist the cover to unlock from the bowl and lift off. Carefully take
out the blade before pouring out the contents of the bowl. To
remove the blade, slightly turn and then pull it off.
8. Unplug immediately after use, before removing or changing
attachments.
9 10
CARE & MAINTENANCE PRODUCT WARRANTY
PRODUCT WARRANTY
CARE & MAINTENANCE
STORAGE
1. Unplug and clean unit.
2. Never store the Immersion Blender while it is hot or
plugged in.
3. Never wrap the cord tightly around the appliance and do
not place any stress on the cord. Store the Immersion
Blender in a clean, dry place.
CAUTION: Never immerse the motor body, plug or cord in water or
any other liquid.
1. Wash the stainless steel blending stick, whisk, chopping bowl,
chopping blade, beakers and beaker base in warm soapy water.
These could be placed into the dishwasher for cleaning.
CAUTION: Do not touch sharp blades.
2. Some foods may discolor the plastic especially food such as
carrots. To help remove the discoloration, dip a kitchen towel
into vegetable oil and rub on the affected area.
This appliance requires little maintenance. It contains no user
serviceable parts. Do not try to repair it yourself. Contact the
customer service department for any unusual issues you may
experience.
CARE & MAINTENANCE above exclusions will be denied. All liability is limited to the
purchase price and does not include any:
Retail offered extended warranties
Tax
Other charges(including postage to send required materials)
Incidental and/or consequential damages associated with the
product in question.
Every implied warranty, including any statutory warranty of
merchantability or fitness for a particular purpose is disclaimed
except to the extent prohibited by law, in which case such warranty
is limited to the duration of this written warranty. This warranty
gives you specific legal rights. You may have other legal rights that
vary depending on where you live. Some states do not allow
limitations on implied warranties or special, incidental, or conse-
quential damaged, so the above limitations may not apply to you.
If you have a claim under this warranty, please call our Customer
Service number: 1-800-562-0738.
For faster service, please have the model number, serial number,
and receipt ready for the operator to assist you.
This warranty applies to products sold by Galanz Americas in the
U.S. This warranty is in lieu of any other warranty and expressly
applies to the individual product only.
Galanz product is warrantied for one year following purchase for
defects in material and workmanship. Please save your receipt
as proof of purchase is required to make a warranty
claim. During this warranty period, we will provide the replacement
cost of this product, a replacement or the equivalent,or repair per
our discretion.
The warranty cannot be transferred through resale, including the
resale through a 3rd party unauthorized retailer and is only
bestowed upon the original consumer purchaser upon purchase
from an authorized retailer.
This warranty does not cover and excludes damage or
defects caused by:
Consumer misuse
Abuse
Neglect including the failure to clean and/or provide adequate
regular maintenance as outlined in the user manual
Commercial use
Subjecting the product to any voltage outside the specified
range
Loss of parts
The affixing of any attachments not provided with the product
Accident, or
Use in a manner not intended and outlined in the user manual.
Any subsequent damages caused by the above listed exclusions
will not be covered and any claims determined to meet the
