gallaria DANZACOMFORT+ Installation instructions

!
INSTALLATION &
OPERATION
INSTRUCTIONS
intelligentbathrooms
DANZACOMFORT+
INTELLIGENT BIDET SEAT

!
intelligentbathrooms
Refers to a potentially dangerous
situation that may cause serious
injury or death .
Refers to a potentially dangerous
situation that may cause injury or
damage to property.
Do not touch or interfere.
Follow the instructions
accordingly.
DANGER
CAUTION
STOP
TAKE NOTICE
EXPLANATION OF SYMBOLS
Gallaria shall not be liable for any loss arising
from the failure to comply with the following:"
1. This toilet is considered to be a Class I (1)
electric appliance, and therefore must be
‘grounded’ by a qualified and licensed electrician
to prevent damage, injury or death."
2. Please ensure the electrical components are
not installed where it can easily be splashed with
water."
3. Please ensure the toilet is installed in a
bathroom with adequate ventilation, e.g. window
ventilation or a bathroom exhaust fan(s)."
4. If the supply cord is damaged, please ensure
it is replaced by a qualified service agent or
similarly qualified persons in order to prevent
damage, injury or death. "
CAUTION
DANZACOMFORT+
INTELLIGENT BIDET SEAT

!
SAFETY ADVICE
DO NOT Insert or remove power plug with wet
hands.
To avoid the risk of electric shock, short-
circuiting, fire, water leakage and damage
to the product:
DO NOT damage the power cord and plug.
Inspect both before installation to ensure all is
intact.
DO NOT disassemble, attempt to repair or
reassemble the product.
DO NOT splash water, detergents or urine on
the product and the power plug.
DO NOT bend or distort the inlet hose.
intelligentbathrooms

!
INCLUDED IN THE BOX
Installation & Operation
Instructions
Fixing Plate
Inlet Hose
Tee Valve
Filter
intelligentbathrooms
DANZACOMFORT+
Intelligent Bidet Seat
Remote Control & Holder
(batteries not included)
Expansion Screws
Adjustment Plates
Installation Template

!
intelligentbathrooms
Phillips Head
Screwdriver
TOOLS REQUIRED
Ball Valve
Alignment Spacers
Installation Template
INCLUDED IN THE BOX

!
Phillips Head
Screwdriver
TOOLS REQUIRED
INCLUDED IN THE BOX
intelligentbathrooms
Ball Valve
Alignment Spacers
Installation Template

!
INCLUDED IN THE BOX
intelligentbathrooms
ESSENTIACOMFORT+
SPECIFICATIONS

!
intelligentbathrooms
TECHNICAL DRAWINGS

!
intelligentbathrooms
Ensure water and
electrical connections
are plumbed/roughed
into place before
installation.
TAKE NOTICE
Installation must be performed by
qualified and licensed tradesmen.
Failure to do so may result in damage
to property, personal injury or death.
DANGER
1
2
3
4

!
intelligentbathrooms
5
6
7
8
9
10

!
intelligentbathrooms
11
12
13
14
Model of bidet seat pictured
above for illustrative
purposes only.
Model of bidet seat pictured
above for illustrative
purposes only.

!
intelligentbathrooms
REMOTE CONTROL INSTALLATION
Installation Method
Remote Control & Holder
(batteries not included)
1
2
3
4

!
intelligentbathrooms
OVERVIEW

!
Rear Wash
Stop
Decrease Flow
Decrease Position
Decrease Water
Temperature
Female Wash
Stage Indicator
Increase Flow
Increase Position
Increase Water
Temperature
OVERVIEW
intelligentbathrooms
The remote control
requires 2 x batteries,
Type CR2032"
(Batteries are not
included)
TAKE NOTICE

"
!
GENERAL CARE & CLEANING ADVICE
intelligentbathrooms
COMFORT+ SEAT
Soft, lint free cloths
Non-abrasive, mild cleaning
agents"
TOILET PAN
Soft, lint free cloths
Low acidic cleaning agents"
Toilet brush"
TAKE NOTICE
AUTOMATIC SELF CLEANING
If the unit is not used for more than 72 hours, the self-cleaning
will operate for approximately 3 minutes when the user operates
the wash function. All buttons on the remote control become
invalid during the self-cleaning function.
SUGGESTED INTERVAL
SUGGESTED CLEANING ACTIVITY
Daily
Wipe down water droplets with a soft lint free cloth to avoid limescale
stains.
Weekly
Throughly wipe down and clean all surfaces. Clean the spray nozzle if
required (see Nozzle Cleaning).
Monthly
Clean the toilet pan with a low acidic cleaning agent.
Every 6 months
Replace the filter if required (see Replacing Filter’).

"
!
FILTER REPLACEMENT
intelligentbathrooms
The filter has a service life of approximately 6 months. Naturally, this is dependent on the
harshness of water the filter is subjected to."
If the filter is not replaced at the suggested interval of 6 months, then we recommend that it be
replaced when the wash flow is noticeably reduced. A reduced wash flow would be an indication
of a blocked filter.

!
NOZZLE CLEANING
intelligentbathrooms
The nozzle will automatically clean itself before washing and after washing."
Should you wish to clean the nozzle manually, please do as follows:"
A. Press and hold down simultaneously the Female Wash and Stop buttons on the bidet
seat for approximately 5 seconds."
B. The nozzle will extend itself and commence a water cleansing process"
C. If required, manually use a soft bristled brush to clean the nozzle"
D. Press the ‘Stop’ button once finished (nozzle will automatically return after 5 minutes if
left unattended

"
!
DRAINING THE WATER TANK
intelligentbathrooms
1. The water and power must be cut before you disassemble the bidet seat"
2. Do not invert or tilt the bidet seat before the water tank is fully drained
DANGER
Note: Model of bidet seat
pictured above for illustrative
purposes only.

"
!
REMOVING THE SEAT COVER AND SEAT
intelligentbathrooms
A
B
C
D

intelligentbathrooms
For further information or help, please contact us:
www.gallaria.com.au
[phone]
Head Office: 27 Helles Avenue,!
Moorebank, NSW 2170