GALLERY 5059413329654 User manual

ASSEMBLY & PRODUCT CARE
COCKTAIL CABINET
5059413329654
IMPORTANT: ONLY ATTEMPT TO MOVE AND ASSEMBLE THIS PRODUCT WHEN EMPTY
DO NOT ATTEMPT TO LIFT ANY LOAD IF IT IS DIFFICULT TO DO SO
THE MAXIMUM LOAD CAPACITY OF EACH DOOR IS 20KG EACH
Thank you for purchasing this PRODUCT. Please read the instructions carefully before use to
ensure safe and satisfactory operation of this product.
Pre-assembly preparation
Please ensure instructions are read in full before attempting to assemble this product
You will need Allen key (included)
Please check the pack contents before attempting to assemble this product. A full checklist of
components is given in this leaflet. If any components are missing, please contact the retailer
from whom you bought this product.
This product is HEAVY, it should be assembled as near as possible to the point of use. TAKE
CARE WHEN LIFTING to avoid personal injury and (or) damage to the product.
This product takes approximately 30 MINUTES to assemble with 2 PEOPLE.
The fittings pack contains SMALL ITEMS which should be KEPT AWAY FROM YOUNG
CHILDREN. Read this leaflet in full before commencing assembly.

Fittings and parts checklist
Part
Description
Image
Qty
1
Top
1
2
Base
1
Fixing
Description
Image
Qty
A
Allen Bolt M5x50mm
5
B
Allen Bolt M5x20mm
2
C
Wall Bracket
2
D
5mm Allen Key
1

Step by step assembly instructions
Step 1
Fix Top (1) to Base frame (2) with Bolts (A) using Allen Key (D) provided.
IMPORTANT: PLEASE NOTE WHEN LIFTING OR MOVING PRODUCT ALWAYS DO SO
FROM THE UNDER FRAME
IMPORTANT: SECURE YOUR FURNITURE TO THE WALL USING THE ANTI-TOPPLE KIT
PROVIDED FOLLOWING THE BELOW INSTRUCTION. SECURING YOUR FURNITURE TO
THE WALL WITH THIS KIT COULD PREVENT INJURY/PROPERTY DAMAGE FROM
UNEXPECTED TIPPING FURNITURE.
Step 2
Carefully move product to the final position at the wall, then attach Wall Bracket (B) into holes
provided under the frame with Bolt (C) using Allen Key (D).
A
D
1
2
B
C
D

Step 3
Adjust the length of Wall Brackets (B) to meet the wall then tighten with Bolt (C) using Allen Key
(D). Mark on wall with a pencil the location to make holes. Now fix the product to the wall using
suitable wall fixings for your wall type.
IMPORTANT: NEVER ALLOW CHILDREN TO CLIMB OR HANG ON DOORS.
NOTE: Fixings ”into” the wall are not included due to the many different wall types and wall
materials. Use wall fixings suitable for your wall type. If unsure, please seek advice of a
professional.
Safety Instructions
Never drag furniture when moving it, always lift it.
When lifting or moving a table always do so from under frame and not the table top.
Periodically check all fixings to ensure none have come loose and re-tighten where necessary.
Please take care when handling or moving the furniture as careless handling may cause
damage or injury.
Furniture can be dangerous if incorrectly installed. Assembly should be carried out by a
competent person. No liability will be accepted for damage or injury caused by incorrectly
insalled or assembled furniture.
It is recommended that before moving heavy objects to a new location they are completely dis-
assembled to avoid personal injury or damage to the furniture. Please be careful to retain all
fittings when doing this.

IMPORTANT: If an Anti-topple device is included with this unit, you must install it in accordance
with the instructions provided using fixings suitable for the wall type. If unsure, please seek
advice of a professional.
Care and Maintenance
WHEN CARED FOR PROPERLY, THIS HAND CRAFTED FURNITURE WILL PROVIDE YOU
WITH YEARS OF ENJOYMENT IN YOUR HOME.
How to care for Wood furniture (unpainted)
Furniture with a hard lacquer, wax polish or painted surface should be dusted with a dry cloth.
Waxed furniture will need to be given a coat of beeswax a couple of times a year to help
maintain its luster.
Spray polishes are best avoided as they contain silicones which may spoil the furniture’s
surface by building up over time.
Make sure all surfaces are protected from heat and liquids by mats and coasters. Wipe up spills
immediately and ensure that a mat or pad is placed under paper if you are writing.
Extendable dining tables should be left extended for the first few months to avoid an uneven
appearance. Likewise, lamps and ornaments should also be moved regularly.
Our furniture will endure most temperatures in the home but it is best to avoid placing furniture
next to heat sources such as radiators or fires. Be particularly careful with solid wood as the lack
of humidity caused by central heating can cause damage such as warping.
How to care for Metal furniture
Metal furniture requires minimal maintenance:
Cleaning your metal furniture is very simple. Use a soft cotton cloth and clean with mild
detergent or water, using a towel immediately dry the furniture afterwards.
Metal furniture is usually damaged due to rust, as a precaution a soft wax after cleaning will help
seal it.
If it has a few spots of rust, you can treat it with rust remover, following the manufacturers
guidelines. (some finishes are made to look like rust)
Smudges and smears can be removed from metal furniture by using a window cleaner and a
paper towel.
Indoor metal furniture is not recommended for outdoor use.

How to care for Leather
Always use reputable leather cleaning products and follow the manufacturer’s recommended
instructions. Regular wiping with a damp, soft cloth is often enough to keep a leather looking
pristine.
Keeping leather at least 50cm from a heat source will avoid the leather cracking.
Spilt liquid should be blotted immediately with a dry cloth or kitchen paper until it is dry, do not
rub the area as this could cause discoloration damaging the finish.
Avoid overexposing your furniture to sunlight, it will help to prevent colour fading.
Beware of sharp objects that could tear, cut, or scratch leather.
WHEN CARED FOR PROPERLY, THIS HAND CRAFTED FURNITURE WILL PROVIDE YOU
WITH YEARS OF ENJOYMENT IN YOUR HOME.
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE