GameSir Remapper A2 User manual

GameSir Remapper A2
GameSir Remapper A2
User Manual
Product introduction
Most of the mobile games are touchscreen only, which
makes mobile gaming experience far more from ideal.
GameSir Remapper, an innovative tool, enables many
touchscreen mobile games with GameSir controller
support. GameSir Remapper was designed for Android
Smartphones/Tablets. Many Android game can be
played with GameSir gamepad on your devices without
rooting or activating via PC.
L1 Status Indicator
L2 Power Indicator

Quick Guide to Activate GameSir Remapper
Prerequisite
Setup tutorials
1. Connect your GameSir Remapper to your phone by
connecting the Micro USB cable between your phone
and A2, and charge your phone by plugging the end of
A2 with USB connector into your phone charger, USB
port on your PC, or power bank… After connected to the
power supply, After connected to the power supply, the
power indicator light stays red, while the status indicator
blue light will flicker.
2. If the USB Debugging authorization pops up, please
enable USB debugging. After connected successfully,
the status indicator blue light stays on.
Note: A2 will not modify System Settings or have any
damages on your Smartphone/tablets. If you restart your
devices, please re-activate the tool with the same tutorial
steps. 12
1. Turn on your Smartphone/Tablet; navigate to
“Settings” →“Developer options” & enable Developer
options →allow USB Debugging. (Note: The ways to
enable “Developer options” are varied in different models
of Android Smartphones / Tablets.)
2. Download & install “GameSir World” App and open it.
https://gamesir.hk/pages/gamesir-world-app

Note: If the status indicator blue light goes out, please
make sure that USB debugging was enabled or not, if
not, please enable it firstly, then disconnect your phone
with A2 by unplugging the USB cable, and restart your
Smartphone / Tablet.
If you have any further questions in activating Remapper
on your Smartphone / Tablet, please contact us on
Facebook: @myGamesir or send a request to
[email protected]
3.When the status indicator blue light stays on, you can
open GameSir world app, navigate to “GameSir Spirit”,
you’ll see the notification as below picture, meaning the
remapper was activated. You can disconnect GameSir
remapper with your devices now.
4. Connect your GameSir gamepad to your devices &
start your journey in the gaming world.
Warranty: The product enjoys free replacement within 3
months and 1-year free maintenance and repair. Free
replacement, maintenance and repair do not cover
man-caused damage.