※Wired Connection Method
Press HOME button for 2 seconds to start the gamepad, connect the gamepad with the device by USB cable. (Note:This wired connection
requests OTG function of the Android device; USB Wired connection is not supported with IOS platform)
※TURBO Function Introduction
Setting up the Turbo button
Clear TURBO
Function
Press one or more buttons, (Including ABXY, L1/L2 Button ), and then press the " TURBO " button once, the corresponding function is
set up successfully.
Press ”Clear” button separately, and then release it ,you can remove all the Turbo function you have set up.
TURBO is used more in shooting games.Your fingers would easily get tired if you continuously press the same button (shooting button).
With the TURBO, you can continuously shoot by holding the shooting button.
TURBO is semi-automatic, it creates one or more continuous button press.
※Possible Problems
Why the Game controller can not be identified on computer?
Why the Game controller does not work in games?
Why the Game controller does not vibrate?
Others
1. Make sure your computer USB port is working.
2. USB voltage is not stable because of short of power supply of computer.
3. Try another USB port.
4. Need to install X360 Game controller software for systems below Windows XP (including XP)
1. When the Game controller can not be turned on, it may be because of running out of battery, please use USB cable to charge the
Game controller .
2. When the Game controller was crashed or disconnected, please keep the device at effective distance, or reconnect.
3. Factory settings reset: There is a small hole at the back of Game controller , press the hole by using a needle to reset the factory
settings.
1. The game does not support Game controller
2. Set the Game controller mode into the game before using
1. The game does not support vibration.
2. Vibration function is not open in game setting.
98
