GammaTech G-MAGIX BOX User manual

USER MANUAL
www.gammatech.com.vn

CONTENTS
A. GENERAL INFORMATION
1. Product Description
2. Specification
3. Packaging and Storage
4. Parameters
C. INSTALLATION INSTRUCTIONS
1. Technical Requirements
2. Product inspection and Storage
3. Carefully review and comprehend
the Instructional Materials
E. COMMON SCENARIOS
B. EQUIPMENT LIST
1. Equipment list
D. USER MANUAL
1. Control via buttons
1.1 Smart Buttons
1.2 SOS Switch
2. Control via app
3. Changing the Login Password for the Control App on
Your Mobile Device
4. User Guide for Sensors, Security, and Timers
4.1 Sensors
4.2 Security
4.3 Timers

A. GENERAL INFORMATION
1. Product Description
2. Specification
3. Packaging and Storage:
The G-Magix Control Cabinet product set is fully packaged along with accompany-
ing accessories in one (1) carton box (dimensions 630x525x165mm (HWD)),
featuring protective foam inserts inside to facilitate easy and secure transportation
The product must be stored in a dry place, at temperatures below 40 degrees
Celsius, away from fire, water, and should not be exposed to outdoor conditions.
A damaged, deformed, or dampened box is considered not meeting the technical
standards and should not be used.
Technical standards for cabinet casing IEC 60 695 - 2 - 1/0, RoHS, WEEE
EN61000-6-1, EN61000-6-3
RoHS
IEC 60947-2, IEC 60898-1
EN 60669-1, EN 60669-2-1, EN 61000-6-3
Standards for control devices
Standards for EIB signal cables
Technical standards for circuit breakers
Technical standards for sensors
0101
The G-Magix Control Cabinet (G-Magix Box) is a product set comprising various
electrical, electronic devices, and other components. These devices have been
installed, programmed, parameterized, and integrated by Gamma Tech,
packaged and ready to create smart control features for residential electrical
devices.
The G-Magix Control Cabinet offers an optimal smart electrical solution for
residential projects such as apartments, townhouses, small villas, or shop
houses.
Equipped with built-in smart features, the G-Magix Control Cabinet includes func-
tionalities for lighting control, curtain control, miniature landscape pump control,
hot water tank control, intruder prevention security, monitoring of entry and exit
doors, emergency status reporting and control, and remote system monitoring via
smartphone, tablet, or desktop computer.

4. Parameters
Product Name G-Magix Control Cabinet
GM001
Gamma Tech
Flush-mounted or In-wall
Europe
White/PVC
IK07
IP40
100 - 240 VAC (50 Hz)
Standard KNX/EIB
8 Basic functions
15 x 12A
2 x 12A
2 x 25A
2 x 1KW
Unlimited
0° to 40° C
-15° to 40° C
7.0 kg
8.0 kg
543 x 460 x 98 mm
630 x 525 x 165 mm
24 months
Virtual Assistant
Model
Brand
Installation Type
Component Origin
Color/Material
Impact Resistance Standard
Dust and Moisture Resistance Standard
Voltage
Control Technology
Features
Rated Current for Controlling Load On/Off
Rated Current for Controlling Curtain Motor
Rated Current for Controlling High Power Load
Maximum Power for Dimming Control
Number of "Scenarios"
Control Method
Operating Temperature
Storage Temperature
Product Weight
Packaging Weight
Cabinet Dimensions (H *W *D)
543 x 460 x 98 mmBox Dimensions (H *W *D)
Packaging Dimensions (H *W *D)
Warranty: 24 months
Smart Buttons
Mobile Device
02

Flush-mounted
98 mm
98 mm
70 mm
543 mm
543 mm
500 mm
460 mm
03

G-Magix ControlCabinet
Peripheral devices
B. EQUIPMENT LIST
An ninh Tưng bừng
Thể thao Tắt phòng
Devices Image Quantity Suppliers
Presence Sensor and
Air Quality
Measurement
SOS switch
Smart Push
Button
Regular
Button
USB 3G
Magnetic Relay Switch
Twisted Pair Shielded
EIB Interference Cable
Motion Sensor
60m
03 units
01 unit
01 set
01 unit
24
buttons
15 pieces
01 unit
MADE IN GERMANY
MADE IN GERMANY
MADE IN USA
MADE IN ITALY
MADE IN ITALY
MADE IN ITALY
MADE IN ITALY
MADE IN VIETNAM
GM-001
MADE IN FRANCE
MADE IN GERMANY
MADE IN GERMANY
MADE IN GERMANY
MADE IN JAPAN
Image Supplier
04

C. INSTALLATION INSTRUCTIONS
1. Technical Requirements
Installer of this product needs to have comprehensive knowledge of electrical
and low-voltage system installation. They should conscientiously adhere to the
procedures and regulations for installing electrical systems to ensure quality,
safety, and to prevent unnecessary errors and accidents. They must have the
necessary specialized equipment for the installation of electrical and low-volt-
age systems.
2. Product inspection and Storage
The product received before installation needs to be complete, undamaged,
without dents, tears, or moisture. When opening the box, check whether the
devices are deformed or show any signs of damage. If there is any doubt, you
should not use them and immediately contact the manufacturer. Always store
the product in a dry place, away from fire and water, and handle it with care
during transportation to avoid impacts or breakage. Do not use sharp or hard
objects to press buttons. Only use soft fabric or paper towels to clean the
surfaces of buttons and sensors..
3. Carefully review and comprehend the Instructional Materials
It is necessary to study and thoroughly understand the principle diagrams as
well as the wiring diagrams for each category in this documentation before
commencing the installation. Refer to the latest guidance information updated
on the website www.gammatech.com.vn or the technical support hotline at
0977345151.
05

Sơ đồ đấu nối tổng quát của tủ điều khiển G-MAGIX
BUS EIB
Phím b'm
EIB
+
Black
Red
06
L1
L2
L3
L4 L4 L4 22 23 34 33 32 17 15 14 8 7 21 19 18 16 13
R1_OP
R1COM
R1_CL
R2_OP
R2COM
R2_CL
S1
24V2+
S2
24V2+
S3
24V2+
12 1110 6520 9GR TGBAUSB2
1
2
3
4
(1x1.5mm)
(1x1.5mm)
(1x2.5mm)
Shutter Shutter
N
N
12
26 27 28 29 30 31 24 25
(1x2.5mm)
Ngu(n chi"u sáng phòng khách, phòng +n, phòng b"p
Ngu(n chi"u sáng phòng ng-master
Ngu(n thi"t b/G-Magix
Ngu(n máy n12c nóng
5èn downlight s nh hành lang
5èn th (chùm) phòng khách
5èn h6t phòng khách
5èn spotlight phòng khách (nhóm 7èn decor)
5èn downlight phòng khách (nhóm 7èn dimmer)
5èn th (chùm) phòng +n 5èn h6t phòng +n
5èn downlight phòng +n
5èn downlight phòng b"p
5èn ban công
5èn h6t phòng b"p
5èn spotlight phòng +n (nhóm 7èn decor)
Bình n12c nóng nhà v&sinh master Bình n12c nóng b"p
5èn h6t phòng Master
5èn spotlight phòng Master (nhóm 7èn decor)
5èn downlight phòng Master (nhóm 7èn dimmer)
5èn downlight phòng thay 7( master
Nút nh'n kh8n c'p
An ninh c:a
Ti"p 7i;m m<rèm phòng khách Ti"p 7i;m chung rèm phòng khách Ti"p 7i;m 7óng rèm phòng khách Ti"p 7i;m m<rèm phòng master
Mô t
L2
L3
L4
5
6
7 8 9
10 11 12 13 14
15
L1
24
25
26
27
28 29
18 19
20 21 22 23
Mô t
16
30
32
C=cC=c
17 B3m/van t12i cây ban công
Ti"p 7i;m chung rèm phòng master
Ti"p 7i;m 7óng rèm phòng master
33 34 31
B
G-Magix Equipment Power Source Master Bedroom Wall Sconce
Master Bedroom Spotlight (Decorative Light Group) Master Bedroom Downlight (Dimmable Light Group) Master Dressing Room Downlight Master Bathroom Hot Water Heater Kitchen Hot Water Heater Emergency Button Door Security Living Room Curtain Open Contact Living Room Curtain Common Contact Living Room Curtain Close Contact Master Bedroom Curtain Open Contact Master Bedroom Curtain Common Contact Master Bedroom Curtain Close Contact
Living Room Lighting Power Source Bedroom Lighting Power Source Kitchen Lighting Power Source Master Bedroom Lighting Power Source Hot Water Heater Power Source Living Room Pendant Light OR Chandelier Living Room Wall Sconce Living Room Spotlight (Decorative Light Group) Living Room Downlight (Dimmable Light Group) Dining Room Pendant Light OR chandelier Dining Room Wall Sconce Dining Room Downlight Dining Room Spotlight (Decorative Light Group) Balcony Irrigation Pump/Valve
Describe Describe
Hallway Downlight Kitchen Downlight Kitchen Wall Sconce Balcony Light

Connection diagram of the G-Magix control cabinet
Connection diagram of the presence sensor combined with air quality
monitoring with the G-MAGIX control cabinet
Connection diagram of the magnetic relay switch to the G-MAGIX control cabinet.
BUS EIB
Phím b'm
EIB
+
Black
Red
S1
24V2+
Cái công t c t#không dây
Cái công t c t#có dây
07
Button
BUS EIB
++ _ _
(24VDC -1)
Black
Red
C m bi"n
EIB
+
Hi&n Di&n
COM TX
BUS
+
C m bi"n
CO2
CIN3 CIN2 CIN1
Presence
Sensor
CO2 sensor
Wired Magnetic Relay Switch
Wireless Magnetic Relay Switch

Wireless Magnetic Relay Switch
D. USER MANUAL
1. Control via buttons
1.1 Smart Buttons
+ Each smart button consists of 6 multifunctional press keys, each with status
lights on every button.
+ Each press key corresponds to a feature or a smart "scene."
+ For example, a smart button placed in the living room may have features
such as:
BUS EIB
Phím b'm
EIB
+
Black
Red
13
24
R1_OP
R1COM
R1_CL
Shutter
NL1
26 27 28
Security Jubilantly
Sports Turn Off
08
Water
heater