Garage Smart Sound Drop User manual



S 
D  p user manual

1TABLEOFCONTENTS
INTRODUCTION 2
FCCAND LEGAL STATEMENTS 3
PARTSIDENTIFIER 4
OVERVIEW OFTHESOUND DROP 5
INSTALLATION
WALL INSTALLATION 6
TRACKINSTALLATION 8
POWERING THESOUND DROP 9
PAIRINGAND CONNECTING 10
TROUBLESHOOTING 11
LIMITED WARRANTY 12

INTRODUCTION
The Sound Drop is a Bluetooth-enabled speaker. With the Sound Drop you can stream
music and audio from your smartphone, Amazon Echo Dot, or other Bluetooth-enabled
devices.
With the built in microphone you can make and take hands free calls while paired to
your phone.
The Sound Drop is designed to work with other Garage Smart products and mounts
using your existing Garage Smart Track System.
Safety Warnings
- Read and follow all safety, installation, and operation instructions.
- Do not install or use near any heat sources.
- Do not install or use near water.
- Do not disassemble.
- Only power speaker with official Garage Smart power adapter
2

3

 (  ) 
 (  ) 

 ' 









- 
- 
- 
-  /  V 
 S 

 0 

PARTSIDENTIFIER 4
MOUNTING SCREWS(x2)UNIVERSAL MOUNT (x1)
3ft DCPOWERCABLE(x2)
SOUND DROP(x1)

5OVERVIEW OFTHESOUND DROP
SPEAKERS
MICROPHONE
MOUNTINGHOLES
POWERIN/OUT

INSTALLATION WALL MOUNT
1. Find a suitable location to
mount the sound drop to the
wall. Confirm that the DC
cable will reach your Power
Adapter or other Garage
Smart product(s).
2. Screw the two wall mount
screws into the chosen
location exactly 2 inches apart
(50.8 mm). Leave the screw
heads about 1/4" (6.35 mm)
away from the wall. Use the
template on page 15 of this
manual.
It is best to mount this product into
a stud, but with caution, placing the
screws into drywall is sufficient.
NOTE
6

INSTALLATION
3. Line up the product mounting
holes with the screws as shown.
Slip the product over the screws
and slide downwards to lock into
place.
The Universal Mount is not
used for wall mounting.
NOTE
The sound drop may be
removed and the screws
tightened for a tighter fit.
NOTE
WALL MOUNT
7

INSTALLATION TRACK MOUNT
1. Clip the connector onto track.
The nubs should snap into place.
2. Align the pins with the holes in the
product. Press on and slide to lock in
place.
8

POWERING THESOUND DROP
1. Using the provided DCcable, the Sound
Drop can be powered by directly plugging
into the Power Adapter or by plugging into
the power output port of the previous device
on the track.
2. Additional devices on the track can be
powered using the power output port on the
Sound Drop.
3. Use track covers to support and organize
cables in the track.
The Sound Drop requires the use
of a Garage Smart Power Adapter.
NOTE
9