Garden Star 70019 User manual

Garden Barrow
Assembly Instructions
Made in China
STAR
GARDEN
Toll Free
877-425-1640
253-893-7014
Email: [e-mail]
Website: www.gardenstarcarts.com
STAR
GARDEN

1
Frame (1)
Tray (1)
Legs (2)
Handle (1)
Axle (1)Wheel (2)
Small
Washer (6)
Nylock
Nut (6)
Big
Washer (2) Cotter
Pin (2)
Parts Included:
!
Not for highway use.
Max. Ination Pressure 30psi.
Manual pump only.
Do not use air compressor.
Tools Needed:
Crescent Wrench
Gloves
Eye-wear
Hex
Bolt (6)
Step Nine:
Tighten everything up by using a hex wrench to hold
the bolts in place and spinning the crescent wrench at
the nylock nut. Enjoy your Garden Barrow!
9
Inate Tires
Max. Ination 30psi.
Manual pump only.
6
Hex
Wrench (1)

5 2
Step One:
Put on your gloves and protective eye-wear.
Slide axle through axle brackets on the frame.
Step Two:
With valve stem facing out, slide rst wheel through
axle. Add big washer and insert cotter pin through
hole in axle. Split ends of cotter pin to hold it in place.
1
2
Step Seven:
Place tray, aligning front holes rst. Slide bolts through
both front holes. Add small washers and nylock nuts.
Tighten with ngers.
7
Big Washer
Cotter Pin Hole
Bolt
Small Washer
Nylock Nut
Valve Stem
Cotter Pin
Step Eight:
Align tray and handle. Insert bolts through tray and
handle. Add washers and nylock nuts. Tighten with
your ngers.
8
Bolt
Small
Washer
Nylock
Nut

3 4
Step Five:
Repeat step 4 on other leg, attaching it to the frame
and securing with bolt, small washer and nylock nut.
Tighten with your ngers.
Step Three:
Repeat step 2 with the second wheel adding big
washer and cotter pin, splitting both ends to keep
it in place.
Step Four:
Attach one leg to frame. Secure with bolt, facing
in. Add small washer and nylock nut. Tighten with
your ngers.
5
3
4
Big Washer
Cotter Pin
Nylock
Nut
Small Washer
Bolt
Nylock
Nut
Bolt
Small
Washer
Step Six:
Place handle on legs. Bolts will be added on step 8.
6

3 4
Step Five:
Repeat step 4 on other leg, attaching it to the frame
and securing with bolt, small washer and nylock nut.
Tighten with your ngers.
Step Three:
Repeat step 2 with the second wheel adding big
washer and cotter pin, splitting both ends to keep
it in place.
Step Four:
Attach one leg to frame. Secure with bolt, facing
in. Add small washer and nylock nut. Tighten with
your ngers.
5
3
4
Big Washer
Cotter Pin
Nylock
Nut
Small Washer
Bolt
Nylock
Nut
Bolt
Small
Washer
Step Six:
Place handle on legs. Bolts will be added on step 8.
6

5 2
Step One:
Put on your gloves and protective eye-wear.
Slide axle through axle brackets on the frame.
Step Two:
With valve stem facing out, slide rst wheel through
axle. Add big washer and insert cotter pin through
hole in axle. Split ends of cotter pin to hold it in place.
1
2
Step Seven:
Place tray, aligning front holes rst. Slide bolts through
both front holes. Add small washers and nylock nuts.
Tighten with ngers.
7
Big Washer
Cotter Pin Hole
Bolt
Small Washer
Nylock Nut
Valve Stem
Cotter Pin
Step Eight:
Align tray and handle. Insert bolts through tray and
handle. Add washers and nylock nuts. Tighten with
your ngers.
8
Bolt
Small
Washer
Nylock
Nut

1
Frame (1)
Tray (1)
Legs (2)
Handle (1)
Axle (1)Wheel (2)
Small
Washer (6)
Nylock
Nut (6)
Big
Washer (2) Cotter
Pin (2)
Parts Included:
!
Not for highway use.
Max. Ination Pressure 30psi.
Manual pump only.
Do not use air compressor.
Tools Needed:
Crescent Wrench
Gloves
Eye-wear
Hex
Bolt (6)
Step Nine:
Tighten everything up by using a hex wrench to hold
the bolts in place and spinning the crescent wrench at
the nylock nut. Enjoy your Garden Barrow!
9
Inate Tires
Max. Ination 30psi.
Manual pump only.
6
Hex
Wrench (1)

Garden Barrow
Assembly Instructions
Made in China
STAR
GARDEN
Toll Free
877-425-1640
253-893-7014
Email: [e-mail]
Website: www.gardenstarcarts.com
STAR
GARDEN