Garden Star Yard Rover User manual

Made in China
STAR
GARDEN
STAR
GARDEN
Toll Free
877-425-1640
253-893-7014
Email: [e-mail]
Website: www.gardenstarcarts.com
Yard Rover
Assembly Instructions
Use also for Pink Barrow, Ladybug and Pumpkin Barrow

1 6
Step Ten:
Tighten everything up by using the hex wrench to hold the
bolts in place and spinning the crescent wrench at the nylock
nut. Enjoy your Yard Rover!
9
10
Parts Included:
Not for highway use.
!
Max. Inflation Pressure 25psi.
Manual pump only.
Do not use air compressor.
Tools Needed:
Crescent Wrench
Gloves
Eye-wear
Inate Tire
Max. Ination 25psi.
Manual pump only.
Frame (1)
Legs (2)
Handle (1)
Axle (1)
Small
Washer (8)
Rubber
Gasket (4)
Nylock
Nut (8)
Big
Washer (2)
Cotter
Pin (2)
Long
Bolt (2)
Short
Bolt (6)
Hex
Wrench (1)
Shim (2)Leg Brace (1)Wheel* (2)
Tray (1)
Step Nine:
Align shims between tray and handle, matching curve of
the shim to the handle. Insert long bolts through rubber
gasket, tray, hole in shim and handle. Add washers and
nylock nuts. Tighten with your ngers.
Shims
Long Bolt
Small
Washer
Nylock
Nut
Rubber
Gasket

52
Step One:
Put on your gloves and protective eye-wear.
Slide axle through axle brackets on the frame.
Step Two:
With valve stem facing out, slide rst wheel through axle.
Add big washer and insert cotter pin through hole in axle.
Split ends of cotter pin to hold it in place.
1
2
Step Seven:
Place handle on legs. Bolts will be added on step 9.
7
8
Big Washer
Cotter Pin Hole
Valve Stem
Cotter Pin
Step Eight:
Place tray, aligning front holes rst. Slide short bolts through
rubber gaskets and front holes. Add small washers and
nylock nuts.Tighten with ngers.
Short Bolt
Small Washer
Nylock Nut
Rubber
Gasket

34
Step Five:
Repeat step 4 on other leg, attaching it to the frame and
securing with short bolt, small washer and nylock nut.
Tighten with your ngers.
Step Three:
Repeat step 2 with the second wheel adding big washer
and cotter pin, splitting both ends to keep it in place.
Step Six:
Place leg brace against legs. Secure both sides with short
bolts, facing in. Add small washer and nylock nut. Tighten
with your ngers.
Step Four:
Attach one leg to frame. Secure with short bolt, facing in.
Add small washer and nylock nut. Tighten with your ngers.
5
3
6
4
Big Washer
Cotter Pin
Nylock
Nut
Small Washer
Short Bolt
Nylock
Nut
Short Bolt
Small
Washer
Short Bolt
Small
Washer
Nylock
Nut

34
Step Five:
Repeat step 4 on other leg, attaching it to the frame and
securing with short bolt, small washer and nylock nut.
Tighten with your ngers.
Step Three:
Repeat step 2 with the second wheel adding big washer
and cotter pin, splitting both ends to keep it in place.
Step Six:
Place leg brace against legs. Secure both sides with short
bolts, facing in. Add small washer and nylock nut. Tighten
with your ngers.
Step Four:
Attach one leg to frame. Secure with short bolt, facing in.
Add small washer and nylock nut. Tighten with your ngers.
5
3
6
4
Big Washer
Cotter Pin
Nylock
Nut
Small Washer
Short Bolt
Nylock
Nut
Short Bolt
Small
Washer
Short Bolt
Small
Washer
Nylock
Nut

52
Step One:
Put on your gloves and protective eye-wear.
Slide axle through axle brackets on the frame.
Step Two:
With valve stem facing out, slide rst wheel through axle.
Add big washer and insert cotter pin through hole in axle.
Split ends of cotter pin to hold it in place.
1
2
Step Seven:
Place handle on legs. Bolts will be added on step 9.
7
8
Big Washer
Cotter Pin Hole
Valve Stem
Cotter Pin
Step Eight:
Place tray, aligning front holes rst. Slide short bolts through
rubber gaskets and front holes. Add small washers and
nylock nuts.Tighten with ngers.
Short Bolt
Small Washer
Nylock Nut
Rubber
Gasket

1 6
Step Ten:
Tighten everything up by using the hex wrench to hold the
bolts in place and spinning the crescent wrench at the nylock
nut. Enjoy your Yard Rover!
9
10
Parts Included:
Not for highway use.
!
Max. Inflation Pressure 25psi.
Manual pump only.
Do not use air compressor.
Tools Needed:
Crescent Wrench
Gloves
Eye-wear
Inate Tire
Max. Ination 25psi.
Manual pump only.
Frame (1)
Legs (2)
Handle (1)
Axle (1)
Small
Washer (8)
Rubber
Gasket (4)
Nylock
Nut (8)
Big
Washer (2)
Cotter
Pin (2)
Long
Bolt (2)
Short
Bolt (6)
Hex
Wrench (1)
Shim (2)Leg Brace (1)Wheel* (2)
Tray (1)
Step Nine:
Align shims between tray and handle, matching curve of
the shim to the handle. Insert long bolts through rubber
gasket, tray, hole in shim and handle. Add washers and
nylock nuts. Tighten with your ngers.
Shims
Long Bolt
Small
Washer
Nylock
Nut
Rubber
Gasket

Made in China
STAR
GARDEN
STAR
GARDEN
Toll Free
877-425-1640
253-893-7014
Email: [e-mail]
Website: www.gardenstarcarts.com
Yard Rover
Assembly Instructions
Use also for Pink Barrow, Ladybug and Pumpkin Barrow