Gardena classicCut special User manual

GB
F
NL
S
I
E
P
DK
DBetriebsanleitung
Turbotrimmer
GB Operating Instructions
Turbotrimmer
FMode d’emploi
Turbofil
NL Instructies voor gebruik
Turbotrimmer
SBruksanvisning
Turbotrimmer
IIstruzioni per l’uso
Turbotrimmer
EManual de instrucciones
Turbotrimmer
PInstruções de utilização
Turbotrimmer
DK Brugsanvisning
Turbotrimmer
classicCut special
Art. 2407
GARDENA
®
D

10
GB
Proper use
Please note
GARDENA Turbotrimmer classicCut special
Welcome to the Garden of GARDENA...
Translation of the original instructions from German. Please read
these operating instructions carefully and observe the notes given.
Use these operating instructions to familiarise yourself with the
Turbotrimmer, its proper use and the notes on safety.
For safety reasons, children under the age of 16 or people who
are not familiar with these operating instructions should not use
this Turbotrimmer.
vPlease keep these operating instructions in a safe place.
1. Where to Use Your GARDENA Turbotrimmer . . . . . . . . . . . . . . . . 10
2. For Your Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
3. Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
4. Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
5. Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
6. Trouble-Shooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
7. Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
8. Technical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
9. Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
1. Where to Use Your GARDENA Turbotrimmer
The GARDENA Turbotrimmer is designed for trimming and cutting
areas of grass and lawns in private house and hobby gardens.
The Turbotrimmer must not be used in public facilities, parks,
sports grounds, next to roads or in agriculture or forestry.
For safety reasons, the GARDENA Turbotrimmer must
not be used for hedge trimming or for shredding for
composting.
Contents
2. For Your Safety
vPlease read the notes on safety on the Turbotrimmer.
Caution!
VAlways read the oper-
ating instructions
before using your
Turbotrimmer.
Danger!
Risk of electric shock!
VKeep your Turbotrimmer
away from water and
rain!
Danger! Risk of injury
to other people!
VKeep other people out
of the area where you
are working.
Danger! Tool does not
stop immediately when
turned off!
VVKeep your hands and feet out of the area
where you are working until the cutting
filament is stationary!

11
GB
Danger!
Risk of injury to eyes!
VAlways wear eye pro-
tection!
Check your Turbotrimmer before each use
vAlways visually inspect your Turbotrimmer
before each use.
vCheck that the ventilation slots are not
obstructed in any way.
Do not use your Turbotrimmer if the safety
devices (push button, safety cover) and/or
the filament cassette are damaged or
worn.
vNever bypass the safety devices.
vInspect the area to be cut before you begin
work. Remove any foreign objects (such
as stones). Look out for foreign objects
(such as stones) while you are working.
vIf you should come across an obstacle
while cutting, turn off the Turbotrimmer.
Remove the object and check the Turbo-
trimmer for any damage. If necessary
have your Turbotrimmer repaired.
Use / responsibility
The Turbotrimmer can cause serious injuries.
vUse the Turbotrimmer only for the purpose
specified in these operating instructions.
You are responsible for the safety in the area
where you are working.
vEnsure that there are no other people
(especially children) or animals within or
near the area where you are working.
vNever use the Turbotrimmer if the safety
devices are damaged or defective.
Unplug the mains plug after use and check
your Turbotrimmer, especially the filament
cassette, regularly for damage. Have your
Turbotrimmer repaired and/or replace the
filament cassette if necessary.
vAlways wear an eye shield or safety
goggles!
vWear sturdy shoes and long trousers to
protect your legs. Keep your fingers and
feet away from the cutting filament –
above all when starting work.
vAlways ensure that you have a secure
foothold whilst working.
vKeep the extension cable away from the
area you are cutting.
Take extra care when walking backwards.
You may stumble!
vOnly work in the daylight or when visibility
is good.
Interrupting work
Never leave the Turbotrimmer unattended
where you are working.
vIf you stop work, unplug the mains plug
and store your Turbotrimmer in a safe
place.
vIf you stop work in order to move to
another part of the garden, always switch
off the Turbotrimmer, wait until the tool
stops and then unplug the mains plug.
Familiarise yourself with the surroundings
vFamiliarise yourself with the surroundings
and look out for possible dangers which
you may not hear due to machine noise.
vNever use the Turbotrimmer when it is
raining or in damp, wet areas.
vDo not operate your Turbotrimmer directly
next to swimming pools or garden ponds.
Electrical safety
Check the power cord regularly for damage
and signs of wear and tear.
Do not use your Turbotrimmer if the power
cord is damaged.
vIf the mains cord or extension cable is
damaged while you are working, unplug
the mains plug immediately.
Do not touch the cable until the mains plug
is switched off.
The socket of the extension cable you are
using must be waterproof.
vOnly use permitted extension cables.
vAsk your electrician.
For all portable units that are operated out-
doors we recommend using a fault circuit
breaker.
In Switzerland the use of a residual-current
device is obligatory.

7
6
9
0
8
7
2
A
A
C
B
12
GB
Risk of injury!
Connecting the
Turbotrimmer:
Setting the Turbotrimmer
to the working position:
3. Assembly
1. Turn over the Turbotrimmer and
stand it on the rubber buffer of
the handle.
2. Fit the cover 1on the cutting
head 2and guide the cutting
filament 3through the opening
in the cover.
3. Secure the cover 1using the
two screws 4.
4. Push the plant guard 5onto
the cutting head 2until you
hear it snap into place.
The plant guard keeps plants you
do not want to trim away from the
cutting filament.
4. Operation
Risk of injury if the Turbotrimmer does not switch off when
you release the start button.
VNever bypass the safety devices (by binding the start
button to the handle, for example).
1. Push the extension cable 6into
the cable lock 7on the handle 8.
2. Plug the plug 9of the Turbo-
trimmer into the socket 0of the
extension cable.
Working position :
Position the additional handle A
so that the cutting head 2is
tilted slightly forward when you
hold the Turbotrimmer in the
working position.
1. Unscrew the tightening nut B,
move the additional handle A
to the correct position and tighten
the nut Bby hand.
2. Unscrew the adjusting nut C,
set the additional handle Ato
the correct angle and tighten
the adjusting nut Cby hand.
Mounting the cover
and plant guard:
5
2
3
4
1

Risk of injury!
Risk of injury!
Cleaning the cover
and ventilation slots:
Replacing the filament
cassette:
E
1
GB
13
Cutting position
Park position
5
5
Starting your Turbotrimmer:
Trimming along lawn edges
and in awkward places:
1. Press the start button Don
the handle 8.
The Turbotrimmer starts.
2. Release the start button Don the handle 8.
The Turbotrimmer switches off.
1. For vertical cutting, loosen the tightening
nut B, turn the additional handle A180 °
and then tighten the nut Bagain by hand.
2. Swivel the plant guard 5backwards to
the park position until it clicks into place.
3. Lift the Turbotrimmer by the handle 8
and additional handle Aand turn to the
cutting position.
4. When trimming between paving stones,
hold the Turbotrimmer so that the cutting
filament moves slightly above the paved
ground.
5. Maintenance
There is a risk of injury from the cutting filament!
VAlways unplug the mains plug of the Turbotrimmer be-
fore carrying out maintenance work!
Risk of injury and risk of damage to property!
VNever clean the Turbotrimmer under running water or
with a water jet (in particular a high pressure water jet).
The ventilation slots must always be free of dirt.
vRemove any grass and dirt from the cover 1and ventilation
slots Eafter each use.
Risk of injury!
AVNever use metallic cutting elements or replacement
parts and accessories not provided by GARDENA.
Only use the original GARDENA Filament Cassette. You can
order Replacement Filament Cassettes from your GARDENA
dealer or directly from the GARDENA Customer Service.
•Filament Cassette for Turbotrimmer classicCut special:
Art. No. 5364-20
A
B
8
8
D

14
GB
L
3
I
H
I
Risk of injury!
Pulling the filament
out of the filament cassette:
1. Unplug the mains plug.
2. Turn over the Turbotrimmer and rest it on the rubber buffer
of the handle.
3. Release the cassette cover Fby pressing both locking clips G
and remove the cover.
4. Remove the filament cassette H.
5. Remove any dirt.
6. Pull approximately 5 cm of the filament 3out of the new
filament cassette Hthrough the eye of the plastic ring I.
7. Insert the filament cassette Hin the filament cassette holder J
so that the filament 3is inside the metal case K.
8. Fit the cassette cover Fon the filament cassette holder Jso
that you hear both locking clips Gclick into place.
When replacing the cover, ensure that the filament is inside the
metal case and is not trapped.
vIf the cassette cover Fcannot be touched down, turn the
filament cassette Hto and fro, until the filament cassette H
is completely in the filament cassette holder J.
6. Trouble-Shooting
Risk of injury from the cutting filament!
VAlways unplug the mains plug of the Turbotrimmer be-
fore troubleshooting.
You can pull the filament out of the filament cassette if the filament
is too short or if it is drawn inside the cassette.
1. Unplug the mains plug.
2. Remove the filament cassette as described under 5. Mainte-
nance
“Replacing the filament cassette” .
3. Press together the plastic ring Ion the filament cassette H
between your thumb and forefinger.
4. Draw the plastic ring Iwith the thumb of the other hand over
the side part of the filament cassette H(use a screwdriver
if necessary).
You can now access the filament that was drawn into the
filament cassette.
5. Unwind the filament 3approximately 10 cm and thread
it through the eye of the plastic ring I. If neces-
sary, loosen the filament beforehand using
a screwdriver. The filament 3may stand
out max. 2 cm over the knife L.
6. Pull the plastic ring Iback over the
filament cassette H.
7. Reinstall the filament cassette as described
under 5. Maintenance
“Replacing the
filament cassette”.
F
H
3
J
K
I
G G

15
GB
Cleaning the filament cassette
and area around the filament
cassette:
If the automatic filament feed still does not work after pulling
the filament out of the filament cassette, the filament cassette
and area around the filament cassette may be dirty.
1. Remove the plastic ring Ifrom the
filament cassette Has described
under “Pulling the filament out of the
filament cassette”.
2. Unwind the filament 3, clean the
filament cassette and the filament
then wind the filament back onto
the cassette.
3. Clean the automatic mechanism
lever Min the filament cassette
holder J.
The automatic mechanism lever must move freely.
4. Reinstall the filament cassette as described under “Pulling
the filament out of the filament cassette”.
Only GARDENA Service Centres and authorised specialist
GARDENA dealers may carry out repairs.
Fault Possible cause Remedy
The Turbotrimmer Filament cassette empty. vReplace the filament cassette
no longer cuts. – see 5. Maintenance
“Replacing the filament
cassette” ).
Filament too short, drawn into vPull the filament out of the
the cassette or stuck together. filament cassette (see above).
Automatic filament feed is not vClean the filament cassette
working since the automatic and area around the
mechanism lever is jammed. cassette (see above).
If you have any other problems please contact the GARDENA Customer Service.
7. Storage
The Turbotrimmer must be stored out of the reach of children.
vStore your Turbotrimmer in a dry place where it is protected
from frost.
Recommended storage:
We recommend that you hang your Turbotrimmer from the cable
lock. Hanging storage helps avoid unnecessary stress on the
cutting head.
The product must not be added to normal household waste. It
must be disposed of in line with local environmental regulations.
vImportant: Make sure that the unit is disposed of via your
municipal recycling collection centre.
I
3
J
H
M
J
Storage:
Disposal:
(in accordance with
RL2002/ 96/EC)

16
GB
Warranty
8. Technical Data
classicCut special (Art. 2407)
Motor power consumption 440 W
Mains voltage /
mains frequency 230 V / 50-60 Hz
Filament thickness 1.6 mm
Cutting width 250 mm
Filament supply 6.0 m
Filament feed Fully automatic
Weight 2.2 kg
Rpm of filament cassette 12,000 rpm
Work area related emission
characteristic value LpA1) 85 dB (A)
Noise level LWA2) measured 94 dB (A) / guaranteed 96 dB (A)
Hand / arm vibration a vhw1) < 2.5 m/s2
Measuring method according to 1) EN 786 2) directive 2000/14/EC
9. Service
GARDENA guarantees this product for 2 years (from date of
purchase). This guarantee covers all serious defects of the unit
that can be proved to be material or manufacturing faults. Under
warranty we will either replace the unit or repair it free of charge
if the following conditions apply:
•The unit must have been handled properly and in keeping with
the requirements of the operating instructions.
•Neither the purchaser or a non-authorised third party have
attempted to repair the unit.
The filament cassette and cassette cover are wearing parts and
are therefore not covered by the warranty.
This manufacturer’s guarantee does not affect the user’s existing
warranty claims against the dealer/seller.
If a fault occurs with your Turbotrimmer, please return the faulty
unit together with a copy of the receipt and a description of
the fault, with postage paid to one of the GARDENA Service
Centres listed on the back of these operating instructions.

66
D
Produkthaftung Wir weisen ausdrücklich darauf hin, dass wir nach dem Produkthaftungs-
gesetz nicht für durch unsere Geräte hervorgerufene Schäden einzu-
stehen haben, sofern diese durch unsachgemäße Reparatur verursacht
oder bei einem Teileaustausch nicht unsere Original GARDENA Teile oder
von uns freigegebene Teile verwendet werden und die Reparatur nicht
vom GARDENA Service oder dem autorisierten Fachmann durchgeführt
wird. Entsprechendes gilt für Ergänzungsteile und Zubehör.
G
Product Liability
We expressly point out that, in accordance with the product liability law,
we are not liable for any damage caused by our units if it is due to im-
proper repair or if parts exchanged are not original GARDENA parts
or parts approved by us, and, if the repairs were not carried out by a
GARDENA Service Centre or an authorised specialist. The same applies
to spare parts and accessories.
F
Responsabilité Nous vous signalons expressément que GARDENA n’est pas respon-
sable des dommages causés par ses appareils, dans la mesure où ces
dommages seraient causés suite à une réparation non conforme, dans la
mesure où, lors d’un échange de pièces, les pièces d’origine GARDENA
n’auraient pas été utilisées, ou si la réparation n’a pas été effectuée par
le Service Après-Vente GARDENA ou l’un des Centres SAV agréés
GARDENA. Ceci est également valable pour tout ajout de pièces et d’ac-
cessoires autres que ceux préconisés par GARDENA.
N
Productaansprakelijkheid Wij wijzen er nadrukkelijk op, dat wij op grond van de wet aansprakelijkheid
voor producten niet aansprakelijk zijn voor schade ontstaan door onze
apparaten, indien deze door onvakkundige reparatie veroorzaakt zijn, of er
bij het uitwisselen van onderdelen geen gebruik gemaakt werd van onze
originele GARDENA onderdelen of door ons vrijgegeven onderdelen en de
reparatie niet door de GARDENA technische dienst of de bevoegde vak-
man uitgevoerd werd. Ditzelfde geldt voor extra-onderdelen en accessoires.
S
Produktansvar Tillverkaren är inte ansvarig för skada som orsakats av produkten om
skadan beror på att produkten har reparerats felaktigt eller om, vid repa-
ration eller utbyte, andra än Original GARDENA reservdelar har använts.
Samma sak gäller för kompletteringsdelar och tillbehör.
I
Responsabilità Si rende espressamente noto che, conformemente alla legislazione sulla
del prodotto responsabilità del prodotto, non si risponde di danni causati da nostri arti-
coli se originati da riparazioni eseguite non correttamente o da sostituzioni
di parti effettuate con materiale non originale GARDENA o comunque da
noi non approvato e, in ogni caso, qualora l’intervento non venga eseguito
da un centro assistenza GARDENA o da personale specializzato autoriz-
zato. Lo stesso vale per le parti complementari e gli accessori.
E
Responsabilidad Advertimos que conforme a la ley de responsabilidad de productos no nos
de productos responsabilizamos de daños causados por nuestros aparatos, siempre
y cuando dichos daños hayan sido originados por arreglos o reparaciones
indebidas, por recambios con piezas que no sean piezas originales
GARDENA o bien piezas autorizadas por nosotros, así como en aquellos
casos en que la reparación no haya sido efectuada por un Servicio Téc-
nico GARDENA o por un técnico autorizado. Lo mismo es aplicable para
las piezas complementarias y accesorios.
P
Responsabilidade Queremos salientar que segundo a lei da responsabilidade do fabricante,
sobre o produto nós não nos responsabilizaremos por danos causados pelo nosso equipa-
mento, quando estes ocorram em decorrência de reparações inadequadas
ou da substituição de peças por peças não originais da GARDENA, ou pe-
ças não autorizadas. A responsabilidade tornar-se-à nula também depois
de reparações realizadas por oficinas não autorizadas pela GARDENA.
Esta restrição valerá também para peças adicionais e acessórios.
K
Produktansvar Vi gør udtrykkeligt opmærksom på at i henhold til produktansvarsloven
er vi ikke ansvarlige for skader forårsaget af vores udstyr, hvis det skyldes
uautoriserede reparationer eller hvis dele er skiftet ud og der ikke er an-
vendt originale GARDENA dele eller dele godkendt af os, eller hvis repara-
tionerne ikke er udført af GARDENA-service eller en autoriseret fagmand.
Det samme gælder for ekstra udstyr og tilbehør.

67
DEU-Konformitätserklärung
MMaasscchhiinneennVVeerroorrddnnuunngg((99..GGSSGGVVOO))//EEMMVVGG//NNiieeddeerrsspp..RRLL
Der Unterzeichnete GARDENA Manufacturing GmbH, Hans-Lorenser-Str. 40,
D-89079 Ulm, bestätigt, dass die nachfolgend bezeichneten Geräte in der von
uns in Verkehr gebrachten Ausführung die Anforderungen der harmonisierten
EU-Richtlinien, EU-Sicherheitsstandards und produktspezifischen Standards
erfüllen. Bei einer nicht mit uns abgestimmten Änderung der Geräte verliert
diese Erklärung ihre Gültigkeit.
GEU Certificate of Conformity
The undersigned GARDENA Manufacturing GmbH, Hans-Lorenser-Str. 40,
D-89079 Ulm, hereby certifies that, when leaving our factory, the units indicat-
ed below are in accordance with the harmonised EU guidelines, EU standards
of safety and product specific standards. This certificate becomes void if the
units are modified without our approval.
FCertificat de conformité aux directives européennes
Le constructeur, soussigné : GARDENA Manufacturing GmbH, Hans-Lorenser-
Str. 40, D-89079 Ulm, déclare qu’à la sortie de ses usines le matériel neuf
désigné ci-dessous était conforme aux prescriptions des directives europé-
ennes énoncées ci-après et conforme aux règles de sécurité et autres règles
qui lui sont applicables dans le cadre de l’Union européenne. Toute modifica-
tion portée sur ce produit sans l’accord express de GARDENA supprime la
validité de ce certificat.
NEU-overeenstemmingsverklaring
Ondergetekende GARDENA Manufacturing GmbH, Hans-Lorenser-Str. 40,
D-89079 Ulm, bevestigt, dat het volgende genoemde apparaat in de door ons
in de handel gebrachte uitvoering voldoet aan de eis van, en in overeenstem-
ming is met de EU-richtlijnen, de EU-veiligheidsstandaard en de voor het pro-
duct specifieke standaard. Bij een niet met ons afgestemde verandering aan
het apparaat verliest deze verklaring haar geldigheid.
SEU Tillverkarintyg
Undertecknad firma GARDENA Manufacturing GmbH, Hans-Lorenser-Str. 40,
D-89079 Ulm, intygar härmed att nedan nämnda produkter överensstämmer
med EU:s direktiv, EU:s säkerhetsstandard och produktspecifikation. Detta
intyg upphör att gälla om produkten ändras utan vårt tillstånd.
IDichiarazione di conformità alle norme UE
La sottoscritta GARDENA Manufacturing GmbH, Hans-Lorenser-Str. 40,
D-89079 Ulm, certifica che il prodotto qui di seguito indicato, nei modelli da noi
commercializzati, è conforme alle direttive armonizzate UE nonché agli stan-
dard di sicurezza e agli standard specifici di prodotto. Qualunque modifica
apportata al prodotto senza nostra specifica autorizzazione invalida la presente
dichiarazione.
EDeclaración de conformidad de la UE
El que subscribe GARDENA Manufacturing GmbH, Hans-Lorenser-Str. 40,
D-89079 Ulm, declara que la presente mercancía, objeto de la presente de-
claración, cumple con todas las normas de la UE, en lo que a normas técni-
cas, de homologación y de seguridad se refiere. En caso de realizar cualquier
modificación en la presente mercancía sin nuestra previa autorización, esta
declaración pierde su validez.
PCertificado de conformidade da UE
Os abaixo mencionados GARDENA Manufacturing GmbH, Hans-Lorenser-Str. 40,
D-89079 Ulm, por este meio certificam que ao sair da fábrica o aparelho
abaixo mencionado está de acordo com as directrizes harmonizadas da UE,
padrões de segurança e de produtos específicos. Este certificado ficará nulo se
a unidade for modificada sem a nossa aprovação.
KEU Overensstemmelse certificat
Undertegnede GARDENA Manufacturing GmbH, Hans-Lorenser-Str. 40,
D-89079 Ulm bekræfter hermed, at enheder listet herunder, ved afsendelse
fra fabrikken, er i overensstemmelse med harmoniserede EU retningslinier,
EU sikkerhedsstandarder og produktspecifikationsstandarder. Dette certifikat
træder ud af kraft hvis enhederne er ændret uden vor godkendelse.
Bezeichnung des Gerätes: Turbotrimmer
Description of the unit: Turbotrimmer
Désignation du matériel : Turbofil
Omschrijving van het apparaat: Turbotrimmer
Produktbeskrivning: Turbotrimmer
Descrizione del prodotto: Turbotrimmer
Descripción de la mercancía: Turbotrimmer
Descrição do aparelho: Turbotrimmer
Beskrivelse af enhederne: Turbotrimmer
Typ: Art.-Nr.:
Type: Art. No.:
Type : Référence :
Typ: Art. nr.:
Typ : classicCut Art.nr. : 2407
Modello: special Art. :
Tipo: Art. Nº:
Tipo: Art. Nº:
Type: Varenr. :
EU-Richtlinien: Harmonisierte EN:
EU directives:
Directives
européennes :
EU-richtlijnen:
EU direktiv:
Direttive UE:
Normativa UE:
Directrizes da UE:
EU Retningslinier:
Hinterlegte Dokumentation: GARDENA Technische Dokumentation
Konformitätsbewertungsverfahren: Nach 2000/14/EG Art. 14 Anhang Vl
Deposited Documentation: GARDENA Technical Documentation
Conformity Assessment according to 2000/14/ EC
Procedure: Art. 14 Annex Vl
Documentation déposée : Documentation technique GARDENA
Procédure d’évaluation de la Selon 2000 /14 /CE art. 14 Annexe Vl
conformité :
Schall-Leistungspegel: gemessen / garantiert
Noise level: measured / guaranteed
Puissance acoustique : mesurée / garantie
Geluidsniveau: gemeten / gegarandeerd
Ljudnivå: uppmätt / garanterad
Livello rumorosità: testato / garantito
Nivel sonoro: medido / garantizado
Nível de ruido: medido / garantido
Lydtryksniveau: afmålt / garanti
94 dB (A) / 96 dB (A)
Anbringungsjahr der CE-Kennzeichnung:
Year of CE marking :
Date d’apposition du marquage CE :
Installatiejaar van de CE-aanduiding:
CE-Märkningsår: 2002
Anno di rilascio della certificazione CE:
Colocación del distintivo CE:
Ano de marcação pela CE:
CE-Mærkningsår:
Thomas Heinl
Ulm, den 19.11.2002 Technische Leitung
Ulm, 19.11.2002 Technical Dept. Manager
Fait à Ulm, le 19.11.2002 Direction technique
Ulm, 19-11-2002 Hoofd technische dienst
Ulm, 2002.11.19. Technical Director
Ulm, 19.11.2002 Direzione Tecnica
Ulm, 19.11.2002 Dirección Técnica
Ulm, 19.11.2002 Director Técnico
Ulm, 19.11.2002 Teknisk direktør
98/ 37/EC : 1998
2006/42/ EC : 2006
2006/95/ EC
2004/108/EC
93/ 68/ EC
2000/ 14/ EC
EN ISO 12100-1
EN ISO 12100-2
EN 786
EN 60335-1
EN 60335-2-91
ISO 4871