Gardeners 8586984 User manual

G Rev /
Mobile Salad Garden
Assemble the Frame
Important: The two long frame sides have two holes drilled off center in the tops of each. The holes are drilled closer to one edge
than the other. It's critical that the off-center holes be closer to the inside of the frame when assembled. See Step  on the next page
for details.
Long Side
Note: the shelf may be
installed with either
side facing up or
down, as you prefer.
Insert casters firmly
and completely.

Phone Orders: 1-800-427-3363 • Customer Service: 1-800-876-5520
e-mail: inf[email protected]om • Web: www.gardeners.com
Assemble the Planting Tray
Step 1. Insert the four Rivets into
the holes in the Potting Tray and
through the drilled holes in the
Frame. Note: the drilled holes are
closer to the inside of the frame
when properly assembled.
Step 2. Spread the Expanded Clay Pellets
over the bottom of the Tray.
Step 3. Place the Fabric over the clay pellets.
Step 4. Fill the Tray with moistened potting
mix. We recommend our Container Mix or
Organic Container Mix.
Important: The Mobile Salad Garden has drainage holes
on the sides about " from the bottom of the tray. When
used indoors, add water to the tray carefully to avoid water
damage from drainage onto floors and carpets.
For more products and articles on growing in elevated
gardens, please visit www.gardeners.com.