Gardenline Essentials User manual

1000w Electric
Lawn Mower
User
Guide
30cm cutting width
28 litre detachable grass
collection box
3 adjustable cutting heights
Integrated safety switch
8m cable

03 Introduction
04 General Information & Safety Instructions
08 Assembly and Parts List
13 Features
14 Instructions
18 Other Useful Information
21 Warranty Card
Packaging
The unit is supplied in packaging to prevent its contents
being damaged in transit. This packaging is raw material and
can therefore be reused or can be returned to the raw
material system.
Helpline No. UK/Northern Ireland 0151 6491500
Rep. Ireland 1890 946244
Model Number: 41688
02
Contents

Introduction 1
Helpline No. UK/Northern Ireland 0151 6491500
Rep. Ireland 1890 946244
Model Number: 41688 03
Congratulations on choosing to buy a Gardenline®
Essentials product. By doing so you now have the
assurance and peace of mind that comes with
purchasing a product made by one of Europe’s
leading manufacturers.
All products brought to you by Gardenline
®
Essentials are manufactured to the highest standards
of performance and safety, and, as part of our
philosophy of customer service and satisfaction,
are backed by our comprehensive 3 Year Warranty.
Great care has gone into the manufacture of this
product and it should therefore provide you with
years of good service when used properly. In the
event of product failure within its intended use
over the course of the first 3 years after date of
purchase, we will remedy the problem as fast
as possible once it has been brought to our
attention. In the unlikely event of such an
occurrence, or if you require any information
about the product, please contact us via our
helpline support services, details of which are
to be found both in this manual and on the
product itself.
We hope you will enjoy using your purchase for
many years to come.

General safety regulations for this electrical tool
This equipment is not designed to be used by people (including
children) with limited physical, sensory or mental capacities or
those with no experience and/or knowledge unless they are
supervised by a person who is responsible for their safety or they
have received instructions from such a person in how to use the
equipment safely.
Children must always be supervised in order to ensure that they
do not play with the equipment.
Safety instructions for hand mower
Before use, check the mains cable and extension cable for signs of
damage and aging.
If the cable is damaged during operation, disconnect it
immediately from the power supply.
Check the machine for signs of damage before use. If unusual
vibrations occur during use, switch the machine off immediately
and pull the plug. Check the cutters and clean them if necessary. If
the machine continues to vibrate, switch it off, disconnect it from
the mains supply and get it checked by a service engineer.
The machine must not be tipped whilst it is being started. Both
hands must be on the handle when you start the machine.
WARNINGS
Do not use the mower if the connection cable is damaged or worn.
Do not use a damaged cable to connect the machine to the mains
supply and do not touch a damaged cable whilst it is connected to
the mains. A damaged cable can result in contact with live parts.
Do not touch the cutters until the machine has been disconnected
from the mains and the cutters have reached a complete standstill.
Helpline No. UK/Northern Ireland 0151 6491500
Rep. Ireland 1890 946244
Model Number: 41688
04
General Information
& Safety Instructions 2
Safety information

Keep extension cables away from the cutters. The cutters can
damage the cables and result in contact with live parts.
Break the connection with the mains supply (in other words pull
the plug out of the socket):
• whenever you leave the machine unattended;
• before releasing a blocked cutter;
• before inspecting or cleaning and before
working on the machine;
• if a foreign body has been struck;
• whenever the machine starts to vibrate oddly.
Carefully read the instructions for how to operate the machine safely.
We recommend that the machine is only connected to a power
supply protected by means of an earth-leakage circuit breaker
(RCD) with a maximum trip current of 30 mA.
Note
a) Read the directions with due care. Familiarize yourself with the
operator controls and proper operation of the machine.
b) Never allow children or other persons who are not familiar with
the operating instructions to use the mower. Contact your local
governmental agency for information regarding minimum age
requirements for the user.
c) Never mow in the direct vicinity of persons - especially children
- or animals.
d) Always keep in mind that the operator or user of the equipment
is responsible for accidents involving other persons and/or their
property.
Preliminary measures
a) Always wear sturdy, non-slip footwear and long trousers when
mowing. Never mow barefoot or in sandals.
b) Check the ground on which the equipment will be used and
remove all objects that could be caught up or violently flung out.
Helpline No. UK/Northern Ireland 0151 6491500
Rep. Ireland 1890 946244
Model Number: 41688 05

c) Before using the lawnmower, visually inspect it to ensure that
the blade, mounting bolts and the entire cutting apparatus are in
good working order (i.e. not worn out or damaged). To prevent
any imbalance, replace worn out or damaged blades and
mounting bolts as a set only (if applicable).
Handling
a) Only mow in broad daylight or in well-lit conditions.
b) Do not use the machine on wet grass.
c) Always maintain good footing on inclines.
d) Only operate the machine at a walking pace.
e) Always mow across hills i.e. never straight up or straight down.
f) Be particularly careful when you change direction on a slope.
g) Do not mow on overly steep inclines.
h) Always be extra careful when turning the mower around and
when pulling it towards you.
i) Switch the mower off, pull the plug and wait until the cutters
have reached a complete standstill if you need to tip the mower
over, transport it over surfaces other than grass and if the mower
has to be moved from and to the area you wish to mow.
j) Never use the lawn mower if the guards are damaged or without
the attached guards, e.g. deflectors and/or grass catching devices.
k) Use the ON/OFF switch carefully as described in the
manufacturer’s instructions. Make sure that your feet are far
enough away from the mower blade!
l) The lawn mower should not be tilted when the motor is switch
on unless it has to be raised for starting purposes. In this case, tilt
it as little as absolutely necessary and only raise the side opposite
to that of the user.
m) Do not switch on the mower if you are positioned in front of
the chute.
Helpline No. UK/Northern Ireland 0151 6491500
Rep. Ireland 1890 946244
Model Number: 41688
06

n) Never move your hands or feet toward or under any rotating
parts. Keep clear of the chute opening at all times.
o) Never lift or carry a lawn mower with the engine running.
p) Switch off the motor and pull the power plug:
• before you dislodge any blockages or clogs in the chute.
• before carrying out any checks, cleaning, maintenance
or other work on the lawn mower.
• if you have struck a foreign object. Examine the mower
for signs of damage and carry out any necessary repairs
before restarting and continuing to work with the mower.
• if the lawn mower begins to experience exceptionally
strong vibrations, immediately switch it off and check it.
q) Switch off the mower and pull the plug whenever you leave
the mower.
Maintenance and storage
a) Make sure that all nuts, bolts and screws are tightened securely
and that the machine is in safe working condition.
b) Allow the mower to cool before you put it into an enclosed area.
c) To avoid the risk of fire, keep the motor housing and ventilation
slots clear of grass, leaves, oil and grease.
d) Routinely check the grass basket for signs of wear and impaired
functionality.
e) For your own safety, have worn or damaged parts replaced
without delay.
Helpline No. UK/Northern Ireland 0151 6491500
Rep. Ireland 1890 946244
Model Number: 41688 07

Helpline No. UK/Northern Ireland 0151 6491500
Rep. Ireland 1890 946244
Model Number: 41688
08
Layout (Fig. 1-2)
1 ON/OFF switch
2 Cable strain-relief clamp
3 Carry handle
4 Grass basket
5 Ejector flap
6 Power Cable
7 Top push bar
8 Bottom push bar
9 Fastening screws for bottom push bar
10 Fastening screws for top push bar
11 Cable clips
12 Grass box housing halves
13 Grass box handle
Assembly & Parts List 3
1

Helpline No. UK/Northern Ireland 0151 6491500
Rep. Ireland 1890 946244
Model Number: 41688 09
2

Before starting the equipment
The lawn mower is delivered unassembled. The complete push bar
and the grass collector must be assembled before using the lawn
mower. Follow the operating instructions step-by-step and use the
pictures provided as a visual guide to easily assemble the machine.
Fitting the push bar (Fig. 3a to 3d)
Fit a bottom push bar (Fig. 3a / Item 8) into the opening provided
for it (Fig. 3a) and secure it as shown in Fig. 3b with a screw (Fig.
3b / Item 9). Proceed in the same way on the other side. When
you fit the top push bar you can decide the height of the push bar
by selecting the appropriate fastening hole (Fig. 3c). Fasten the
top push bar using either the holes L for a low position or H for a
high position. Screw the top push bar to the bottom push bar as
shown in Fig. 3d.
Helpline No. UK/Northern Ireland 0151 6491500
Rep. Ireland 1890 946244
Model Number: 41688
10
Assembling the lawn mower
3b3a
3d3c

Fitting the grass box (Fig. 4a to 4f)
Fit the two halves of the grass box together (Fig. 4a / Item 12). The
two halves are identical. Ensure that all the plastic lugs engage
correctly (Fig. 4b). Next push the grass box handle (Fig. 4c / Item 13)
into the openings on the grass box. Check that the handle is secure
and correctly positioned as shown in Fig. 4d. Before you fit the grass
bag you must ensure that the motor is switched off and the blade is
not rotating. The grass box must be attached to the two hooks on the
mower (Fig. 4e / Item A). To do this, open the ejector flap with one
hand (Fig. 4f / Item 5) and attach the grass box with the other hand as
shown in Fig. 4f. The ejector flap is held against the grass box by a spring.
Helpline No. UK/Northern Ireland 0151 6491500
Rep. Ireland 1890 946244
Model Number: 41688 11
4b4a
4d4c
4f4e

Setting the cutting heights - Important!
Adjust the cutting height only when the engine is switched off
and the power cable has been disconnected.
Before you begin to mow, check to ensure that the blade is not
blunt and that none of the fasteners are damaged. To prevent any
imbalance, replace blunt and/or damaged blades. To carry out this
check, first switch off the motor and pull out the power plug.
The cutting height is adjusted as shown in Figs. 6a and 6b. To do
this turn the hub cap clockwise to release the axle (Fig. 6a) and
remove the hub cap with the screw and tire. The tires can now
be fitted in position 1, 2 or 3 to suit the required cutting height.
Fit all four tires at the same height so that the cutting blade runs
parallel to the lawn.
Position Cutting depth
1 60 mm
2 42.5 mm
3 25 mm
Helpline No. UK/Northern Ireland 0151 6491500
Rep. Ireland 1890 946244
Model Number: 41688
12

Helpline No. UK/Northern Ireland 0151 6491500
Rep. Ireland 1890 946244
Model Number: 41688 13
Explanation of the warning signs on the equipment (see Fig. 8)
1 = Read the directions for use before operating the equipment.
2 = Wear ear guards and goggles.
3 = Keep all other persons away from the danger zone.
4 = Caution! -Sharp blades- Before carrying out any maintenance
work or if you damage the cable, pull the plug out of the socket.
5 = Caution: The cutters continue to run after the motor is
switched off.
6 = Do not expose the equipment to rain or moisture.
7 = Caution: Keep the power cable away from the cutters!
Features 4
8

The lawn mower is designed for use in private gardens.
The machine is to be used only for its prescribed purpose. Any
other use is deemed to be a case of misuse. The user / operator
and not the manufacturer will be liable for any damage or injuries
of any kind caused as a result of this.
Please note that our equipment has not been designed for use in
commercial, trade or industrial applications. Our warranty will be
voided if the machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
Helpline No. UK/Northern Ireland 0151 6491500
Rep. Ireland 1890 946244
Model Number: 41688
14
Instructions 5
Proper use
Before you connect the equipment to the mains supply make sure
that the data on the rating plate are identical to the mains data.
Operation
5a

Important!
To prevent the machine switching on accidentally, the lawn mower
is equipped with a safety lock-off (Fig. 5a/Item A) which must be
pressed before the switching bar (Fig. 5a/Item B) can be activated.
The lawn mower switches itself off when the switch is released.
Repeat this process several times so that you are sure that the
machine functions properly. Before you perform any repair or
maintenance work on the machine, ensure that the blade is not
rotating and that the power supply is disconnected.
Repeat this process several times so that you are sure that the
machine functions properly. Before you perform any repair or
maintenance work on the machine, ensure that the blade is not
rotating and that the power supply is disconnected.
Important!
Never open the discharge flap if the grass box is being emptied and
the motor is still running. The rotating blade can cause serious injuries.
Always secure the discharge flap and grass bag carefully. Always
switch off the motor before you remove these items.
The safety distance between the blade casing and the user provided
by the guide struts must be maintained at all times. Take special care
when mowing and changing direction on embankments and slopes.
Ensure that you have a secure surface to stand on, wear shoes with
anti-slip soles that offer good grip, and long trousers. Always mow
across the slope (not in up or down direction).
Do not use the mower on gradients exceeding 15° for safety reasons.
Take special care when moving backwards and pulling the lawn
mower. Danger of stumbling.
Operation
Helpline No. UK/Northern Ireland 0151 6491500
Rep. Ireland 1890 946244
Model Number: 41688 15

We recommend that you mow in overlapping lines. Only mow with
sharp, perfect blades so that the blades of grass do not fray, making
the lawn turn yellow.
To achieve a good cut, guide the lawn mower in lines that are as
straight as possible.
These lines should always overlap by a few centimeters so that you
do not leave any strips. How often you should mow the lawn
depends on how fast the lawn grows. During the main growth period
(May – June), mow it twice a week, and once a week at other times.
The cutting height should be between 4 and 6 cm and the growth
before the next cut should be between 4 and 5 cm. If the lawn grows
longer than this on occasion, do not make the mistake of cutting to
normal length straight away since this will damage the lawn. Never
cut the grass by more than half its height. Keep the underside of the
mower casing clean and remove all grass deposits from it. Deposits
make it more difficult to start the mower and also adversely affect
the mowing quality and the grass discharge. On slopes mow across
the slope (not in up or down direction). You can counteract the
tendency of the mower to slide down the slope by setting it at an
angle upwards. Select the cutting height to suit the actual length of
the grass. Make several passes to ensure that you do not remove
more than 4 cm of grass length in any one pass.
Switch off the motor before you carry out any inspections of the
blade. Remember than the blade will continue to turn for a few
seconds after the motor has been switched off. Never attempt to
stop the blade.
Check regularly that the blade is correctly secured, in good condition
and well ground. If not, grind or replace the blade. If the moving
blade strikes an object, stop the mower and wait until the blade has
come to a complete standstill. Then check the condition of the blade
and the blade holder. If they are damaged, they must be replaced.
Place the mains lead in loops on the ground in front of the socket.
Mow away from the socket and cable and ensure that the mains lead
is always on the section of lawn that you have already mowed so that
you do not run over the mains lead with the mower. As soon as you
see mown grass on the lawn whilst you are mowing, the grass bag
will need emptying.
Information on correct mowing
Helpline No. UK/Northern Ireland 0151 6491500
Rep. Ireland 1890 946244
Model Number: 41688
16

Important!
Before you remove the grass bag switch off the motor and wait until
the cutting tool reaches a standstill.
To remove the grass bag, raise the discharge flap with one hand and
remove the grass bag using its handle with your other hand.
To maintain safety, the discharge flap will close when you remove the
grass back to seal the rear discharge opening. If any grass residues
are caught in the opening, it is a good idea to pull the mower
backwards around 1 m to make it easier to start the motor.
Do not remove grass cuttings in the mower casing or on the cutter
by hand or with your feet. Instead use suitable tools such as a brush
or broom. To ensure that it can collect the grass correctly the grass
bag and in particular the net must be cleaned from the inside after
use. Only attach the grass bag after switching off the motor and the
cutting tool has reached a standstill. Raise the discharge flap with
one hand and, holding the grass bag by its handle in your other hand,
attach it from the top.
Helpline No. UK/Northern Ireland 0151 6491500
Rep. Ireland 1890 946244
Model Number: 41688 17

Helpline No. UK/Northern Ireland 0151 6491500
Rep. Ireland 1890 946244
Model Number: 41688
18
Always pull out the mains power plug before starting any cleaning work.
Cleaning
• Keep all safety devices, air vents and the motor housing
free of dirt and dust as far as possible. Wipe the equipment
with a clean cloth or blow it with compressed air at low
pressure.
• We recommend that you clean the device immediately
each time you have finished using it.
• Clean the equipment regularly with a moist cloth and some
soft soap. Do not use cleaning agents or solvents; these
could attack the plastic parts of the equipment. Ensure
that no water can seep into the device.
Cleaning, maintenance and ordering of spare parts
6a 6b
7
Useful Information 6

Replacing the blade
For safety reasons, we recommend having the blade replaced by an
authorized professional.
Important!
Wear work gloves!
Only replace the blade with a genuine Einhell replacement blade, as
this will ensure top performance and safety under all conditions.
Carry out the following steps to change the blade:
• Undo the fastening screw (Fig. 7).
• Remove the blade and replace with a new one.
• When fitting the blade, make sure it is installed in the right
direction. The blade’s air vanes must jut into the motor
compartment.
• Then retighten the fastening screw. The tightening torque
should be approx. 25 Nm.
Carbon brushes
• In case of excessive sparking, have the carbon brushes
checked only by a qualified electrician. Important! The
carbon brushes should not be replaced by anyone but a
qualified electrician.
Maintenance
• There are no parts inside the equipment which require
additional maintenance.
Helpline No. UK/Northern Ireland 0151 6491500
Rep. Ireland 1890 946244
Model Number: 41688 19
Please quote the following data when ordering replacement parts:
• Type of machine
• Article number of the machine
• Identification number of the machine
• Replacement part number of the part required
For our latest prices and information please go to www.isc-gmbh.info
Ordering replacement parts

Helpline No. UK/Northern Ireland 0151 6491500
Rep. Ireland 1890 946244
Model Number: 41688
20
The unit is supplied in packaging to prevent its being damaged in
transit. This packaging is raw material and can therefore be reused or
can be returned to the raw material system.
The unit and its accessories are made of various types of material,
such as metal and plastic. Defective components must be disposed
of as special waste. Ask your dealer or your local council.
Keep the noise emissions and vibrations to a minimum.
Only use appliances which are in perfect working order.
• Service and clean the appliance regularly.
• Adapt your working style to suit the appliance.
• Do not overload the appliance.
• Have the appliance serviced whenever necessary.
• Switch the appliance off when it is not in use.
• Wear protective gloves.
Voltage: 230 V ~ 50 Hz
Power input: 1000 watts
Motor speed: 3600 rpm
Cutting width: 30 cm
Cutting height adjustment: 25-60 mm; 3 levels
Volume of catch bag: 28 liters
LpA sound pressure level: 72,8 dB(A)
LWA sound power level: 96 dB(A)
Vibration at the handlebars ahv: < 2,5 m/s2
Protection class II/
Disposal and recycling
Technical data