Gardenline 56979 User manual

User Manual
Product
Info
www.powertoolsupport.com
Read all safety warnings and all instructions thoroughly before operating this product.
Ensure you keep your manual in a safe place for future reference.
IM ed 9; 10/2017
MODEL No.: DM53E3-D196, PRODUCT No.: 56979
56979
196CC 4 STROKE,
ELECTRIC START,
SELF PROPELLED,
VARIABLE SPEED PETROL
LAWN MOWER WITH
SIDE DISCHARGE &
MULCH FUNCTION
X
PLUSPLUS
20V
BATTERY SYSTEM
X
FINITY
20V
BATTERY SYSTEM
PLUSPLUS

Contents
QR codes take you where you want to go
quicky and easily
Whether you require product information, spare parts or accessories,
details on warranties or aftersales service, or if you want to watch
a product demonstration video, our QR codes will take you there in
no time at all.
What is a QR code?
A QR-code (QR=Quick Response) is a type of matrix that can be read
with a smartphone camera and that contains a link to a website or
contact details, for example.
Advantage: You are not required to manually enter a website address
or contact details.
How it works
To scan the QR code, all you need is a smartphone with QR codes reader
software and an Internet connection*. This type of software can be
downloaded for free from your smartphone’s app store.
Try it out now
Just scan the QR code with your smartphone and
nd out more about the Aldi product you have
purchased*.
Pack Contents /Parts 2
Description of Symbols 3
General Safety Warnings 4
Safety Rules for Petrol Lawn Mowers 6
Operation Safety Instructions 10
Safety Rules for Charger & Batteries 12
Intended use of the 196c Petrol Lawn Mower 14
Parts List 16
Assembly 19
Attaching the Lower Handles 19
Attaching the Upper Handle Bar to the Lower Handle 21
Assembly of the Hard Catcher 22
Attaching the Hard Catcher 22
Assembly of the Side Discharge Chute 22
Recoil Starter Handle holder 23
Battery Charging 24
Preparing for Operation 25
Mulch and Mowing 25
Adding and Checking the oil 25
Fuelling 26
Adjusting the Cutting Height 27
Operation 27
Starting the Engine (Electric / Key Start) 27
Starting the Engine (Manual / Recoil Start) 28
Stopping the Engine 28
Emergency Stopping 29
Mowing Advice 29
Engine tipping/ Poor Engine Performance 30
Operating Functions of the Lawn Mower 31
Self Propelled Variable Speed Control 31
Maintenance 33
Replacing the Blades 33
Removing Oil 34
Air cleaner Maintenance 35
Spark Plug 36
Deck Wash 37
Storage and Transporting 38
Warranty 39
Environmental Protection 39
What your 3 year Warranty Means 39
Accessories and After Sales Parts 40
Service Support 41
Troubleshooting 41
Specications 42
Product
Info
For Know How Videos, click on the
“Product Assistance”tab, then the
“How To Product Videos”link.
* Depending on your tarif you may be charged
for the connection.
MODEL No.: DM53E3-D196, PRODUCT No.: 56979 MODEL No.: DM53E3-D196, PRODUCT No.: 56979

196cc 4 Stroke Petrol Lawn Mower
AFTER SALES SUPPORT
e-mail: [email protected] 1800 909 909
MODEL No.: DM53E3-D196 • 10/2017 • 56979 (toll free)
4
Pack contents / parts
Congratulations on the purchase of your Gardenline® 196cc 4 Stroke
Petrol Lawn Mower. When you open your packaging, rst remove all items and
check there are no parts damaged or missing. If you nd
anything wrong, do not operate the product until the parts have been replaced
or the fault has been rectied. Failure to do so could result in
serious personal injury.
Intended use of the 196cc Petrol LawnMower
NOTE: This product is for private domestic DIY use only.
It is not suitable for commercial, industrial or trade use.
This product is suitable for private home use i.e for use in home and
gardening environments, for the application of mowing.
IMPORTANT INFORMATION.
NOTE: This is a 4 stroke Lawn Mower.
The engine MUST be lled with 500ml of SAE 10W/30
BEFORE starting. Fresh unleaded fuel must be used in this unit.
DO NOT use Ethanol based fuels. Do NOT mix oil with fuel.
NOTE: First time users or inexperienced operators pay particular
attention to the operation of the Lawn Mower, including details of
starting and stopping the mower on pages 27-29 and correct use of
the Lawn Mower on pages 31-32.
Contents of carton
2 3
Description of symbols
The rating plate on your product may show symbols. These represent
important information about the product or instructions on its use.
Conforms to relevant standards for electrical safety
and electromagnetic compatibility.
Wear hearing protection. Wear eye protection.
Wear breathing protection.
Wear safety footwear.
Wear safety gloves.
Warning.
Do not crush, disassemble, short terminals or dispose in re;
there is a risk of burns explosion or re.
Do not put in water.
Do not charge the battery pack if the ambient
temperature is less then 0°C or greater than 45°C.
Indoor use.
Double Insulation. There are two independent barriers of insulation
to protect you from the possibiltiy of electrical shock.
MEPS.
Polarity.
Read these instructions for use carefully.
Use at a distance of at least 15m from other people.
Thrown objects can cause severe injury.
Explosive material.
Extremely hot surface. Do not touch a hot muer, gear box or
cylinder, you may get burned. These parts get extremely hot from
operation and remain hot for a short time after the unit is turned o.
Before carrying out any operation stop the engine
and disconnect the spark plug.
Risk of hand and feet injuries.
Waste electrical products should not be disposed
of with household waste.
Noise label rating 75dbBA (taken at 7.5 metres).
You must wear ear protection
at all times.
NOIS E dB
A
75
1 x Lawn Mower
1 x Hard Catcher (not tted)
1 x Side Discharge Chute (not tted)
1 x Spark Plug Wrench
1 x Standard Hose Fitting (not tted)
1 x 51314 20V Xnity Li-Ion Battery
1 x Plug Pack Charger
2 x Drink Holder Cups (not tted)
2 x Forward Rotating Quick Adjustment
Knobs (tted)
2 x Upper Handle Locking Levers
(not tted)
2 x Lower Handle Locking Knobs
(not tted)
1 x Charger Adaptor
1 x Key Set (2)
1 x Mulching Block (not tted)
1 x Cable Holder Clip (not tted)
1 x Instruction Manual
1 x Warranty Card & details
1 x Quick Start Guide
MODEL No.: DM53E3-D196, PRODUCT No.: 56979 MODEL No.: DM53E3-D196, PRODUCT No.: 56979

General Safety Warnings
Safety instructions
WARNING Read and understand all instructions. Failure to follow
all instructions listed below may result in electric shock, re and/or
serious injury. The term“power tool”in all of the warnings below refers
to your mains-operated (corded) power tool, garden power tool,
battery-operated (cordless) power tool or your petrol operated
garden tool.
Save these instructions
Work area
• Ensure the area to be mowed is clear and free of debris, rocks, gravel,
garden furniture etc.
• Keep work area clean and well lit. Cluttered and dark areas invite
accidents.
• Do not operate power tools in explosive atmospheres, such as in the
presence of ammable liquids, gases, or dust. Power tools create sparks
which may ignite the dust or fumes.
• Ensure all animals, children and bystanders are at least 15m away while
operating this lawn mower. Distractions can cause you to lose control.
Personal safety
• Stay alert, watch what you are doing and use common sense when
operating a power tool. Do not use a power tool while you are tired
or under the inuence of drugs, alcohol, or medication. A moment of
inattention while operating power tools may result in serious personal
injury.
• Use safety equipment. Always wear eye protection. Safety equipment
such as a dust mask, non-skid safety shoes, hard hat, or hearing
protection used for appropriate conditions will reduce personal injuries.
• Remove any adjusting key or wrench before turning the tool on.
A wrench or a key that is left attached to a rotating part of the power
tool may result in personal injury.
• Do not overreach. Keep proper footing and balance at all times.
This enables better control of the power tool in unexpected situations.
• Dress properly. Do not wear loose clothing or jewellery. Keep your hair,
clothing and gloves away from moving parts. Loose clothes, jewellery or
long hair can be caught in moving parts.
• If devices are provided for the connection of dust extraction and
collection facilities ensure that these are connected and properly used.
Use of these devices can reduce dust-related hazards.
Power tool use and care
• Do not force the power tool. Use the correct power tool for your
application. The correct power tool will do the job better and safer at
the rate for which it was designed.
• Do not use the power tool if the switch does not turn it on and o. Any
power tool that cannot be controlled with the switch is dangerous and
must be repaired.
• Turn tool o completely before making any adjustments, changing
accessories, or storing power tools. Such preventive safety measures
reduce the risk of starting the power tool accidentally.
• When not in use, store power tools out of the reach of children and do
not allow persons unfamiliar with the power tool or these instructions
to operate the power tool. Power tools are dangerous in the hands of
untrained users.
• Maintain power tools. Check for misalignment or binding of moving
parts, breakage of parts and any other condition that may aect the
power tool’s operation. If damaged, have the power tool repaired before
use. Many accidents are caused by poorly maintained power tools.
• Keep cutting tools sharp and clean. Properly maintained cutting tools
with sharp cutting edges are less likely to bind and are easier to control.
• Use the power tool, accessories and tool bits etc., in accordance with
these instructions and in the manner intended for the particular type
of power tool, taking into account the working conditions and the work
to be performed. Use of the power tool for operations dierent from
intended could result in a hazardous situation.
Service
• Have your power tool serviced by a qualied repair personnel using
only identical replacement parts. This will ensure that the safety of
the power tool is maintained. Agent (Refer to page X for information
relating to nding your nearest Service Agent).
4 5
MODEL No.: DM53E3-D196, PRODUCT No.: 56979 MODEL No.: DM53E3-D196, PRODUCT No.: 56979

General Safety Warnings
Safety rules for Petrol Lawn Mowers
Training
• Read the instructions carefully. Get familiar with the controls and proper
use of the equipment.
• Only use the lawn mower for the purpose for which it was designed,
i.e. for cutting and collecting grass. Any other use can be hazardous,
causing damage to the machine.
• Never allow children or people unfamiliar with these instructions to use
the lawn mower. Local regulations may restrict the age of the operator.
• Never use the lawn mower:
• When people, especially children, or pets are nearby.
• If the operator has taken medicine or substances that can aect his
ability to react and concentrate.
• Remember that the operator or user is responsible for accidents or
hazards occurring to other people or their property.
Preparation
• While mowing, always wear sturdy footwear and long trousers. Do not
operate the equipment when barefoot or wearing open sandals.
• Thoroughly inspect the area where the equipment is to be used and
remove all objects which may be thrown by the machine or damage the
cutter assembly and the engine (stones, sticks, metal wire, bones, etc.)
WARNING: DANGER!
Engine fuel is highly ammable.
• Store fuel in containers specically designed for this purpose.
• Refuel using a funnel and outdoors only.
• Do not smoke while refuelling or whenever handling the fuel.
• Never refuel near an open ame.
• Add fuel before starting the engine. Never remove the cap of the fuel
tank or add fuel while the engine is running or when the engine is hot.
• If fuel is spilled, do not attempt to start the engine but move the
machine away from the area of spillage and avoid creating any source
of ignition until the fuel has evaporated and the vapour dispersed.
• Replace all fuel tanks and containers caps securely.
• Substitute faulty silencers.
• Before use, always inspect the machine, especially the condition of the
blades, and check that the screws and cutting assembly are not worn
or damaged. Replace worn or damaged blades and screws in sets to
preserve balance.
• Discharge openings must be guarded at all times. Do not remove the
discharge guard or hold it up while mowing.
• It is advisable to wear suitable eye protection when operating the
mower.
Operation
• Do not operate the engine in a conned space where dangerous
carbon monoxide fumes can collect.
• Mow only in daylight or good articial light.
• If possible, avoid operating the equipment in wet grass.
• Always be sure of your footing on slopes.
• Walk, never run and do not allow yourself to be pulled along by the
lawn mower.
• Mow across the face of slopes, never up and down.
• Exercise extreme caution when changing direction on slopes.
• Do not mow on slopes of more than 20°.
• Exercise extreme caution when pulling the lawn mower towards you.
• Stop the blade if the lawn mower has to be tilted for transportation
when crossing surfaces other than grass, and when transporting the
lawn mower to and from the area to be mowed.
• Never operate the lawn mower with defective guards, or without safety
devices, such as the stoneguard and/or grass-catcher, in place.
Replace if damaged.
• Do not change the engine governor settings or over speed the engine.
6 7
MODEL No.: DM53E3-D196, PRODUCT No.: 56979 MODEL No.: DM53E3-D196, PRODUCT No.: 56979

AFTER SALES SUPPORT
(toll free)
196cc 4 Stroke Petrol Lawn Mower
e-mail: [email protected]1800 909 909
MODEL No.: DM53E3-D196 • 10/2017 • 56979
11
• On power-driven models, disengage the drive clutch before starting
the engine.
• Start the engine carefully, following the instructions and keeping feet
well away from the blade.
• Do not tilt the lawn mower when starting the engine.
Start the engine on a at surface that is free of obstacles and tall grass.
• Do not put hands or feet near or under rotating parts. Keep clear of the
discharge opening at all times.
• Never pick up or carry a lawn mower while the engine is running.
• Stop the engine and disconnect the spark plug wire:
- Before carrying out any work underneath the cutting deck or before
unclogging the chute;
- Before checking, cleaning or working on lawn mower;
- After striking a foreign object. Inspect the lawn mower for damage and
make repairs before restarting and operating the lawn mower;
- If the lawn mower starts to vibrate abnormally (nd and remove the
cause of the vibration immediately).
• Stop the engine:
- Whenever you leave the lawn mower unattended.
- Before refuelling.
- Every time you remove or replace the grass-catcher.
• When mowing, always keep to a safe distance from the rotating blade.
This distance is the length of the handle.
• Never cut grass while walking backwards.
• Stop the engine before pushing mower across gravel drives, walks or
roads.
• This machine is to be used exclusively for cutting natural grass.
Never use the mower for other purposes. Any other utilization can
involve danger for your safety and can involve damage to the mower.
• The user is responsible for the safety of other people, animals and
objects in the working area. Keep children and domestic animals at a
safe distance while the mower is in use.
Maintenance and Storage
• Keep all nuts, bolts and screws tight to be sure the equipment is in safe
working condition. Regular maintenance is essential for safety and
performance.
• Never store the equipment with fuel in the tank inside a building where
vapour may reach a ame or a spark or a source of extreme heat.
• Allow the engine to cool before storing in an enclosed space.
• To reduce the re hazard, keep the engine, exhaust silencer, battery
compartment and fuel storage area free of grass, leaves, or excessive
grease. Do not leave containers with grass cuttings in rooms.
• Check the stone-guard and grass-catcher frequently for wear and
deterioration and replace if damaged.
• If the fuel tank has to be drained, this should be done outdoors and
when the engine is cool.
• Wear strong work gloves when removing and reassembling the blade.
• Check the blade’s balance after sharpening.
• For reasons of safety, do not use the equipment with worn or damaged
parts. Parts are to be replaced and not repaired. Parts that are not of the
same quality can damage the equipment and be dangerous for your
safety.
• Whenever the machine is to be handled, transported or tilted you must:
- Wear strong working gloves;
- Grasp the machine at the points that oer a safe grip, taking account of
the weight and its distribution.
• Damaged blades and worn bolts are major hazards.
• Fuel goes o in about 3 - 4 months. If you nd your mower does not
start, try changing the fuel in the tank with newly purchased fresh
unleaded fuel. Do not use ethanol based fuels.
8 9
MODEL No.: DM53E3-D196, PRODUCT No.: 56979 MODEL No.: DM53E3-D196, PRODUCT No.: 56979

AFTER SALES SUPPORT
(toll free)
196cc 4 Stroke Petrol Lawn Mower
e-mail: [email protected]1800 909 909
MODEL No.: DM53E3-D196 • 10/2017 • 56979
13
Operation Safety Instructions
WARNING: Stop the engine and unplug the spark plug before any
repairs or maintenance operations.
• Check that all nuts, bolts and screws are well tightened before every use.
• Before mowing ensure that the blade and the blade xing screw are
securely fastened. When the blade edges require re-sharpening, this
must be done evenly on both sides to prevent any imbalance. If the
blades are damaged, it must be replaced.
• When mowing always wear long trousers and strong, covered footwear.
• Do not run the engine in an enclosed and/or poorly ventilated area.
The gas of the engine contains carbon monoxide, which is dangerous to
your health.
• Work only when there is sucient light.
• Do not use the lawn mower when it is raining or when the grass is wet.
• Caution must be taken while mowing on slopes. Mow across the face of
slopes, never down or up.
• Turn o the engine if you must leave the lawn mower unattended.
• Never lift the rear of the mower while starting the engine and never
place your hands and feet underneath the deck while the engine is
running.
• If working on high grass, adjust the mowing height to reduce the friction
and prevent over loading. The optimal mowing height should be 1/3 the
height of the grass. It would aect the work eciency of lawn mower if
too much higher or lower.
• Never change the rated speed of the engine in any way .
• Never lift or carry the mower while the engine is running.
• Stop the engine and remove the spark plug cover in these cases:
- Before any operation under the deck.
- Before any maintenance, repairing or checking operations.
- Before carrying, lifting or removing the mower.
- If you leave the mower unattended or change the cutting height.
- After hitting a foreign object, stop the engine and check thoroughly
the mower in order to see if it is damaged. Take the mower to an
authorised service centre to carry out any repairs if necessary.
10 11
- If the mower vibrates in an abnormal way, take the mower to an
authorised service centre.
- Check the bolts and nuts regularly. Bolts and nuts may vibrate loose
over time.
WARNING:
Fuel is highly ammable.
• Keep fuel in a jerry can specially made for this purpose.
• Fill the fuel tank with a funnel and outside. Do not smoke or use a mobile
phone during this process.
• Fill with fuel and oil before starting the engine. Never open the cap of
the fuel tank to add gasoline while the engine is running or still hot.
• Do not start the engine if there is spilt fuel on the mower or in the area
surrounding. Take the mower away from the zone where fuel has been
split and avoid any contact from a hot source as long as the split gasoline
is completely evaporated.
• Tighten the fuel tank cap and jerry can cap tightly.
MODEL No.: DM53E3-D196, PRODUCT No.: 56979 MODEL No.: DM53E3-D196, PRODUCT No.: 56979

12 13
Safety Rules for Charger & Batteries
a) Use only the charger and batteries supplied in this pack.
b) Protect the charger and battery pack against moisture including
rain and high humidity.
c) Always check that the power cord is correctly connected before
using the charger.
d) When you are not using the charger, remove the plug from the
mains socket. Do not pull the plug out by the power cord.
e) Handle the battery pack carefully. Do not let it fall or be subject to
impact.
f) Always remove the plug from the power socket before you clean or
maintain the charger or battery pack.
g) Do not charge the battery pack if the ambient temperature is less
than 0°C or greater than 45°C.
h) Do not short circuit the battery pack. A short circuit gives rise to
a heavy current causing overheating and the possibility of re or
explosion.
i) Do not connect a cable to the battery pack terminals.
j) Make sure that no metal objects such as a nail, paper clip or coin
nds its way into the charging socket.
k) A damaged battery pack or one which no longer holds its charge
must be disposed of in a special way and not placed for normal
household rubbish collection.
l) Never throw a battery pack into a re or into water.
m) Keep handles dry, clean and free from oil and grease.
Slippery handles do not allow for safe handling and control
of the tool in unexpected situations.
n) This product should only be started by using Aldi Xnity batteries
only; models 51314 or 55756 . Other Battery models will be
available from time to time but use only models marked as
Xnity 20V.
NOTE: This unit may not be used by people (including children)
with reduced physical, sensory or mental capacities, with a lack of
experience and without the appropriate knowledge, unless they are
supervised by someone who is responsible for their safety or have
been instructed by such a person with regard to how the unit is to be
operated.
Children should be supervised to ensure that they do not play with
the device.
MODEL No.: DM53E3-D196, PRODUCT No.: 56979 MODEL No.: DM53E3-D196, PRODUCT No.: 56979

NOTE: This product is for private domestic DIY use only.
It is not suitable for commercial, industrial or trade use.
This product is suitable for private home use i.e for use in home and
gardening environments, for the application of mowing and
mulching grass.
This lawn mower oers various functions to accommodate dierent lawn
mowing requirements.
1. Catcher Mowing – standard lawn mowing with hard catcher attached.
2. Side Discharge Mow - Using the side discharge chute, grass clippings
are ejected from the mower on the right hand side of the deck. The rear
hard catcher should not used when the side discharge is used.
3. Mulch and Mow - Using the mower without the hard catcher attached;
the lawn mower will mulch as it cuts and and the ne grass clippings are
distributed back onto the grass surface without leaving piles of grass
clippings.
4. Self Propelled - Using the variable speed self propelled function for
eortless mowing which can be used with any of the mowing functions
listed above.
5. Deck Wash - The deck wash feature
allows you to wash/clean the
underside of the lawn mower deck
using a standard garden hose tting
or the supplied garden hose tting.
6. Electric Start - The electric start
feature operates with an ALDI Xnity
20V Lithium-Ion battery to provide
eortless starting.
14 15
3
6
1
2
5
4
* Hose not included
Intended use of the
196cc Petrol Lawn Mower
MODEL No.: DM53E3-D196, PRODUCT No.: 56979 MODEL No.: DM53E3-D196, PRODUCT No.: 56979

196cc 4 Stroke Petrol Lawn Mower
AFTER SALES SUPPORT
e-mail: [email protected] 1800 909 909
MODEL No.: DM53E3-D196 • 10/2017 • 56979 (toll free)
AFTER SALES SUPPORT
(toll free)
196cc 4 Stroke Petrol Lawn Mower
e-mail: [email protected]1800 909 909
MODEL No.: DM53E3-D196 • 10/2017 • 56979
16 17
1. Upper handle bar
2. Self Propel engage/disengage bar
3. Self propel variable speed control
4. Self propel variable speed cable
5. Self Propel engagement cable
6. Key Start Battery system
charging cable
7. Tool and refreshment holder
(2 x drink holders)
8. 51314 20V Xnity Li-ion Battery
9. Lower handle
10. Upper handle locking lever (x 2)
11. Lower handle locking knob (x 2)
12. Lower handle mounting plate
(with 3 height position)
13. Cable holder clip
14. Forward rotating quick adjustment
knobs (x2)
15. Catcher attachment bracket
16. Rear discharge guard
17. Rear wheels
18. 8 Height adjustment lever
19. Deck wash nozzle
20. Side discharge chute
21. Side ejector cover
22. Engine
23. Recoil starter
24. Oil ller cap/dipstick
25. Fuel tank
26. Fuel tank cap
27. Spark plug cover / Spark Plug
(located under cover)
28. Air lter
29. Air lter cover
30. 4 x Blades
31. Blade bolt
32. Outer Flange + washer
33. Front wheels
34. Spark plug spanner
35. Nudge Bar
36. Oil drain plug
37. Blade mounting plate
38. Standard hose tting
39. Mulching block
40. Battery compartment
41. Battery Charger Adaptor
42. Plug Pack Charger
43. Hard catcher
44. Catcher attachment bar
45. Battery Release tab
46. Key set (2)
47. Recoil Starter handle holder
20
21
33
25
17
43
47
24
36
14
18
10
6
3
4
7
5
10
9
35
27
29
11
23
22
14
13
2
1
13
12
Part List Part List
8
Parts List

196cc 4 Stroke Petrol Lawn Mower
AFTER SALES SUPPORT
e-mail: [email protected] 1800 909 909
MODEL No.: DM53E3-D196 • 10/2017 • 56979 (toll free)
AFTER SALES SUPPORT
(toll free)
196cc 4 Stroke Petrol Lawn Mower
e-mail: [email protected]1800 909 909
MODEL No.: DM53E3-D196 • 10/2017 • 56979
18 19
WARNING: Stop the engine and unplug the spark plug before any
repairs or maintenance operations.
WARNING: DO NOT attempt to start this mower without rst adding
0.5L of SAE 10W/30 engine oil to the Engine.
WARNING: Do Not attempt to start this mower without the mower
rst being FULLY assembled.
It is necessary to t the lower handle (9), upper handle (1), and catcher (43).
Attaching the Lower Handles
NOTE: When preparing for this assembly, remove the upper and lower
handle bars from the box ensuring the cables do not become tangled or
crossed over. Damage to the cables can aect performance of the engine.
After removing from the packaging box, lay the handles in position for
assembly as shown in Fig A. The self propel variable speed cable (4), and the
self propel engagement cable (5) need to be aligned down the left hand side
of the handles. The key start battery system charging cable (6) needs to be
aligned down the right hand side of the mower. Ensure during assembly all
the cables are laid above the handles not on the underside of the handles.
NOTE: The cable holder clip (13), will hold the self propel variable speed
cable (4), and the self propel engagement cable (5) in place after assembly.
NOTE: The key start battery system
charging cable (6) is already held in
position to the upper handle bar
with 4 cable clips, as indicated by
the arrow.
15
16 19
26 28
30
31
32
34 36
37 38 39
40
45 46
Part List Assembly
42
41
A.
A
4
5
6
44
Assembly

196cc 4 Stroke Petrol Lawn Mower
AFTER SALES SUPPORT
e-mail: [email protected] 1800 909 909
MODEL No.: DM53E3-D196 • 10/2017 • 56979 (toll free)
AFTER SALES SUPPORT
(toll free)
196cc 4 Stroke Petrol Lawn Mower
e-mail: [email protected]1800 909 909
MODEL No.: DM53E3-D196 • 10/2017 • 56979
20 21
Assembly Assembly
1. Once the handles are set up as shown in Fig A,
remove the 2 x lower handle locking knobs
( + bolt/s & curved washer/s) (11) from your
accessory bag (Fig B). Place the lower handle in
position to assemble by aligning the 2 x lower
handle ends on the outer side of the lower
handle mounting plates (12).
2. Once in position, insert the bolt on each side
through the lower mounting plate (12) from the
inside of the mounting plate (12) through to the
outside of the lower handle (9) (Fig C).
NOTE: You may need to support the lower
handle to engage the bolt through as shown
in Fig C on the left.
3. Once the bolts are loosely in position, t the
plastic curved washer over the end of the bolt
(Fig D), then screw the lower handle locking knob
(11) over the plastic curved washer and secure by
turning clockwise until tight and secure (Fig E).
4. Next select the desired position to set the height
of the full handle assembly. There are 3 positions
as shown in Fig F.
It is suggested to select the middle location
to start with. You can then raise or lower the
adjustment after you have seen the overall
height when the assembly is complete.
5. Rotate both of the forward rotating quick
adjustment knobs (14) 90° (Fig G). THESE ARE FIRM TO ROTATE, however,
when you rotate these knobs the location pin is drawn back into the
handle. Align the pin with the selected position (Fig F) and then rotate the
forward rotating quick adjustment knobs (14) 90°. The pin will locate in the
selected hole. Repeat for the opposite side.
Attaching the Upper Handle Bar
to the Lower Handle
With the lower handle (9) in position, the upper
handle bar (1) can now be secured in position.
IMPORTANT: Again ensure the cables are not
tangled or crossing over before applying the
upper handle bar (1).
1. Remove the 2 x upper handle locking levers
( + curved washer/s & locking knob/s) (10)
from your accessory bag (Fig H).
2. Align the ends of the upper handle bar (1) on
the external side of the lower handle (9) such
that the holes in the ends of the upper handle
bar (1) align with the holes in the top of the
lower handle (9).
3. Insert the upper handle locking lever (10) bolt
through the upper handle (1), then through the
lower handle (9). When in position repeat on
the opposite side to keep the upper handle bar
(1) sturdy in position (Fig I).
4. Apply the curved washer and locking knob on
the internal side of the lower handles (9), push
the locking lever down towards the handle bar,
then tighten the locking knob until secure
(Fig J).
NOTE: Tension on the upper handle locking
lever/s (10) can be adjusted by rotating the
lever knob.
5. Apply the cable clip holder (13) (from your
accessory bag) on the lower handle to ensure
the 2 cables (self propel variable speed cable (4),
and the self propel engagement cable (5)) are
secure in position above the handle bar and not
tangled (Fig K).
I.
J.
K.
H.
(X2)
D.
C.
B.
(X2)
E. G.F.
90°

196cc 4 Stroke Petrol Lawn Mower
AFTER SALES SUPPORT
e-mail: [email protected] 1800 909 909
MODEL No.: DM53E3-D196 • 10/2017 • 56979 (toll free)
AFTER SALES SUPPORT
(toll free)
196cc 4 Stroke Petrol Lawn Mower
e-mail: [email protected]1800 909 909
MODEL No.: DM53E3-D196 • 10/2017 • 56979
22 23
Assembly of the Hard Catcher
The hard catcher (43) is supplied in 2 sections.
Locate the top half of the catcher on top of the
bottom half and interlock them together by
aligning the clips on the top half of the catcher
into the raised ridge around the bottom half of the
catcher, then push the halves together until they
click into place. (Fig L)
Attaching the Hard Catcher
1. Lift the rear discharge guard (16) in order to
position the assembled hard catcher (43).
NOTE: Do NOT ever start the lawn mower if the
rear discharge guard does not fully return to the
close position if the catcher is not tted.
2. Apply the hard catcher (43) by aligning the
catcher attachment bar (44) on the catcher over
the catcher attachment bracket (15) centrally so
the catcher is sitting evenly.
3. Release the rear discharge guard (16) to secure
the hard catcher (43) into place. (Fig M)
NOTE: Always empty the catcher before it has
reached maximum capacity, otherwise it will
decrease the performance of the lawn mower.
TIP: Do not leave grass clippings in the catcher
for extended periods of time.
L.
M.
Assembly Assembly
Assembly of the Side Discharge Chute
WARNING: Ensure the engine is NOT operating when tting the side
discharge chute (20).
Do not operate or have the engine running when the side ejector cover is
opened and the discharge chute is not tted.
NOTE: The side discharge chute (20) is used to distribute grass clippings
from the side of the mower while the mower is in use. To use this function,
the hard catcher (43) is NOT required to be assembled on the lawn mower.
1. Raise the side ejector cover (21) to be able to
position the side discharge chute (20) onto the
side of the deck of the lawn mower. (Fig N)
2. Place the side discharge chute (20) into position
on the side of the deck, by aligning the 2 top
tabs on the side discharge chute (20) with
the bars on each side at the top of the side
ejector cover (21), and then place the 2 top tabs
underneath the bars to secure (Fig O). Release
the side ejector cover (20). (Fig P)
3. To remove the side discharge chute (20), raise the side ejector cover (21),
and remove the side discharge chute (20). Lower / release the side ejector
cover (21).
NOTE: For the
best performance
in “side discharge
chute”mode,
insert the
mulching block
(39).
Recoil Starter Handle holder
When not using the recoil starter (23), it can be pulled up to the recoil starter
handle holder (47). By looping the pull cord through the holder, the recoil
handle can sit securely in the recoil starter handle holder (47) for when not
in use.
Raise ejector cover
N.
P.O.
Slide tabs under bars

196cc 4 Stroke Petrol Lawn Mower
AFTER SALES SUPPORT
e-mail: [email protected] 1800 909 909
MODEL No.: DM53E3-D196 • 10/2017 • 56979 (toll free)
AFTER SALES SUPPORT
(toll free)
196cc 4 Stroke Petrol Lawn Mower
e-mail: [email protected]1800 909 909
MODEL No.: DM53E3-D196 • 10/2017 • 56979
24 25
Battery Charging
This lawnmower is equipped with electric start
and uses ALDI Xnity 20V powered batteries to
start the product.
Battery Model 51314 is provided with the product .
All Xnity 20V batteries are compatible including
model 55756.
The charger provided with this product is a
standard charger.
IMPORTANT. Before attempting to charge the
battery, check the charger
adaptor (41), plug pack charger (42), and the
battery (8) to ensure the charging equipment
matches the battery supplied. The components
are all labelled with component numbers.
NOTE: The battery pack (8) needs to be removed
from the lawn mower for charging.
CAUTION! The battery (8) may require charging
at rst use. A full charge will require approximately
5-7 hours.
CAUTION! The working temperature of the
charging operation is 0°C to 45°C.
1. Connect the battery charger adaptor (41) into
the plug pack charger (42) (Fig Q).
2. Connect the plug pack charger (42) in to the
240V mains power outlet. A“green” light
indicates power (Fig R).
3. Slide the battery charger adaptor (41) onto
the battery (8) by aligning the guiding rails.
A click indicates the battery is tted (Fig S)
4. The plug pack charger (42) light will change to
“red”. The battery is now in the charging process.
When the light returns to“green”, the battery (8) is fully charged. (Fig R).
NOTE: The power to the charger should be turned o when unattended,
with or without a battery inserted.
Battery Charging Preparing for Operation
Mulch and Mowing
Using the mower without the hard catcher (43) attached; the lawn mower will
mulch as it cuts and and the ne grass clippings are distributed back onto the
grass surface without leaving piles of grass clippings.
WARNING:
Ensure the engine is NOT operating when undertaking this task.
1. Remove the hard catcher (43) by lifting the rear discharge guard and releasing
the catcher (43). (Fig T)
2. Lift the rear discharge guard (16), insert the mulching block (39) into
position, then release and close the rear discharge guard (16). (The
mulching block (39) is correctly in place when the circle tabs on the block
click into place at the bottom of the rear discharge chute (Fig U).
3. Ensure the side ejector cover (20) is in the closed position (Fig V).
Do NOT use the side discharge chute (20) when mulch and mowing.
Adding and Checking the oil
IMPORTANT: The engine of this lawn mower is packed with NO OIL in the
engine. Prior to starting the engine, Oil MUST be added to the sump of
the engine.
Failure to add sucient oil will result in damage to the engine which is
NOT covered under the warranty of the lawn mower.
On a new lawn mower, the engine needs to be lled with 500ml of SAE 10W/30
engine oil. We recommend Gardenline® Full Synthetic 4 Stroke Oil.
Each time the lawn mower is used, the oil level should be checked and if low,
add sucient oil to ensure the oil level is to the full mark on the dipstick.
1. Position the lawn mower on a at and level surface. Clean the area
directly around the oil ller cap (24).
V.U.T.
Q.
S.
R.
CHARGING
POWER ON/FULLY
CHARGED
Preparing for Operation

196cc 4 Stroke Petrol Lawn Mower
AFTER SALES SUPPORT
e-mail: [email protected] 1800 909 909
MODEL No.: DM53E3-D196 • 10/2017 • 56979 (toll free)
AFTER SALES SUPPORT
(toll free)
196cc 4 Stroke Petrol Lawn Mower
e-mail: [email protected]1800 909 909
MODEL No.: DM53E3-D196 • 10/2017 • 56979
26 27
2. Remove the oil ller cap / dipstick (24) by turning
approximately a quarter turn in an anti clockwise
direction and lift the cap outwards. Clean the oil
dipstick (24) with a clean cloth, cleaning away
any visual oil (Fig W).
3. FOR A NEW LAWN MOWER, add 500ml of
4 stroke SAE 10W/30 engine oil.
4. Insert the oil dipstick back and secure the oil
ller cap (24) by turning approximately a quarter
turn in a clockwise direction.
5. Again remove the oil dipstick (24) and check the
oil level. It should be at the top of the full
(H marking) indicator on the dipstick (Fig X).
6. If low, add oil slowly into the engine oil ll.
Do not overll. After adding oil, wait one minute
and then recheck the oil level.
7. Replace and tighten the oil ller cap / dipstick
(24). Always ensure the oil ller cap is rmly
locked in place before the engine is started.
NOTE: Do not allow engine to run low on oil as it will reduce the life of
the engine.
NOTE: Do not over ll with oil above the full indicator mark.
Fuelling
IMPORTANT: Fuel goes o after about 3-4 months. If you nd your lawn
mower does not start, rst change the fuel in the tank with newly purchased
fresh unleaded fuel. Do not use ethanol based fuels.
WARNING. Do not rell fuel tank while engine is running or is hot.
• Be careful not to admit dust, dirt, water or other foreign objects into the fuel.
• Wipe o spilt fuel thoroughly before starting engine.
• Ensure you DO NOT fuel the lawn mower in close proximity to any open
ames, lit cigarettes, or hot objects.
1. Unscrew the fuel tank cap (26) and pour fresh unleaded fuel into the tank
with the aid of a funnel. (Fig Y )
2. Fill the tank to approximately 2.5 cm below
the lowest portion of the neck to allow for fuel
expansion. Be careful not to over ll or spill any
fuel. If this happens, wipe the spill with a
clean rag.
3. Start the engine at least 3 metres away from the
area where the fuel tank has been lled in order
to avoid the risk of re.
W.
Y.
Preparing for Operation Operation
Adjusting the Cutting Height
The mower has one lever to easily adjust the
cutting height. There are 8 height settings.
NOTE: Always try to adjust the cutting height of
the lawn mower while positioned on the area of
grass you plan to mow.
It is recommended to start on a higher setting and
mow a trial area of lawn before deciding on the
nal cutting height position. Then readjust if
necessary.
1. To increase the cutting height pull the height
adjustment lever (18) outward towards the
wheel, and move it up a notch, towards the rear
of the lawn mower. (Fig Z)
2. To decrease the cutting height pull the height
adjustment lever (18) outward towards the wheel,
and move it down a notch, towards the engine. (Fig AA)
3. After adjustment, ensure the lever is fully located in the selected notch.
Starting the Engine (Electric / Key Start)
NOTE: Before starting the mower check the oil and fuel levels. The engine
MUST be lled with 500ml of SAE 10W/30 engine oil BEFORE starting. Fresh
unleaded fuel must be used in this unit.
DO NOT use Ethanol based fuels. Do NOT mix oil with fuel.
Warranty will be void if the engine becomes faulty due to insucient oil and
fuel levels.
For starting, ensure the mower is set to the highest height setting so the
blades are not resting deep into the grass.
NOTE: The engine of this lawn mower does has an automatic choke start
and operation feature, and no priming bulb, hence no priming or choke
adjustment is required before starting the engine.
X.
L (LOW)
H (HIGH)
Z.
AA.
INCREASE
DECREASE
Operation

196cc 4 Stroke Petrol Lawn Mower
AFTER SALES SUPPORT
e-mail: [email protected] 1800 909 909
MODEL No.: DM53E3-D196 • 10/2017 • 56979 (toll free)
AFTER SALES SUPPORT
(toll free)
196cc 4 Stroke Petrol Lawn Mower
e-mail: [email protected]1800 909 909
MODEL No.: DM53E3-D196 • 10/2017 • 56979
28 29
1. Ensure the battery (8) is charged. If not, refer to
the “Battery Charging”section of the manual.
2. Insert the battery (8) into the battery
compartment (40) at the rear of the tool and
refreshment holder (7).
A click will be heard when the battery has
engaged (Fig AB).
3. Ensure the self propel variable speed control (3)
is in the “START” position; back towards the upper
handle bar (1) (Fig AC).
4. Turn the key (46) to the right to the“START”
position to start the lawn mower engine. The
engine should start. (Fig AD). Release the key
(46) as soon as the engine starts. The key will
automatically move to the “ON”position.
Starting the Engine (Manual Recoil Start)
1. Ensure the self propel variable speed control
(3) is in the “START” position (back towards the
upper handlebar (1)) (Fig AC).
2. Turn the key (46) to the right to the“ON” position.
3. Firmly hold the recoil starter (23) & pull slowly
until resistance is felt, then pull rapidly (Fig AE).
Stopping the engine
1. To stop the engine, move the key (46) to the left to the “OFF”position.
(Fig AF).
2. When shutting down always return the self propelled variable speed
control (3) to the“SLOW”or “START” position.
AC.
Operation Operation
AB. EMERGENCY STOPPING
If you have turned the key (46) and the lawnmower
fails to stop, do not panic - there are two other safe
stopping methods available for you to try. Do not
put ngers or hands anywhere near the cutting
deck.
The safest method is to wheel the lawn mower to a
safe area and allow the lawn mower to continue to
run until the fuel has been all used up.
An alternative to this where the user is condent, is to remove the spark plug
cap by pulling it from the spark plug (27) (Fig AG). This removes the engines
ability to re and run.
However it is recommended to wear a rubber glove when grasping the spark
plug cap as a small electric shock is possible when pulling the cap o.
Ensure you feel condent to do this . If not, simply allow the lawnmower to run
out of fuel.
CAUTION: The spark plug may be hot.
Persons with heart conditions or any medical condition which can be aected
by electric shock should not attempt this method.
Do not attempt to restart the lawnmower and contact your local service agent
and book a repair of the product.
Do NOT lift the lawn mower. Do NOT tilt the lawn mower.
Do NOT leave the running lawn mower unattended.
Do NOT put hands under the running lawn mower under any circumstances.
Mowing advice
1. Before mowing always check and clear the grassed area for all foreign
objects, especially solid ones semi concealed in the ground such as rocks,
stumps and garden stakes.
2. Sharp blades cut cleanly and eciently, if the blades are dull it will tear the
grass. This will result in the ends turning brown. When the blades no longer
cut cleanly either sharpen them or replace them.
AG .
AE.AD. AF.
The lawn mower
moves at its lowest
self propelled
speed when in
this position
The lawn mower
moves at its
highest self
propelled speed
when in this
position

196cc 4 Stroke Petrol Lawn Mower
AFTER SALES SUPPORT
e-mail: [email protected] 1800 909 909
MODEL No.: DM53E3-D196 • 10/2017 • 56979 (toll free)
AFTER SALES SUPPORT
(toll free)
196cc 4 Stroke Petrol Lawn Mower
e-mail: [email protected]1800 909 909
MODEL No.: DM53E3-D196 • 10/2017 • 56979
30 31
3. To safely operate the mower ensure all four wheels are on the ground and
be careful not to lose your footing or control of the mower. Be very careful
when mowing uneven or rough ground. Keep a rm grip on the handle bar
at all times, always walk, never run with the lawn mower.
4. For healthy growth, grass should not be cut too short. The grass will remain
healthier, greener and require less watering.
5. Vary your cutting pattern from week to week, this will help to prevent
matting and graining of the grass.
6. If using the mulching function, and grass is piling up behind the lawn
mower during the cutting action, lift the lawn mower to the next cutting
height using the height adjustment lever (18).
Engine tipping
NOTE: Always ensure the engine is switched o and
the spark plug cap is removed before undertaking
this task.
When cleaning, or performing any maintenance
such as replacing the blades, it is very important
that the lawn mower is ONLY tipped backwards.
(Fig AH). Failing to do so will result in the engine
damage. Should this occur, the mower should be
taken to a lawn mower repair shop which is not covered under warranty.
Poor engine performance
Should the engine idle or run rough at full speed with excessive bluey/black
smoke emanating from the muer, it is possible that either the engine was
slightly tipped incorrectly (refer above). If the mower had previously been
tipped, allow the engine to run for a few minutes and the excess oil will
burn out.
If the engine is not running at full speed, check the fuel is fresh, check the oil
level, and also inspect under the deck to ensure there is no build up of grass.
Check the spark plug. If the mower continues to underperform, take the
mower to your nearest an authorised Service Agent.
AH.
Operation Operation
Operating Functions of the Lawn Mower
Self propelled or manual operation of the lawn mower:
This lawn mower has the option to be manually pushed or engine driven
self propelled when the engine is operating.
1. Manual Operation:
The lawn mower is manually maneuvered
under the user’s own power when the mower is
operating. ie the user is pushing the lawn mower
to power its movement forwards or backwards.
To operate this way manually, simply leave
the self propel engage/disengage bar (2) in
its standard position. i.e DO NOT LIFT the self
propel engage/disengage bar (2) towards the
upper handle bar (1). (Fig AI)
2. Self Propelled Operation:
The self propelled operation will only operate when the engine of the
lawn mower is operating, and the self propel engage / disengagement
bar (2) has been activated by lifting it up to the handle bar and holding
in position, hence the mower will move forward itself with the operator
steering and directing from the handlebars.
The self propelled operation is ONLY in the forward direction.
Self Propelled Variable Speed Control
The variable speed control (3) allows you to adjust your lawn mowers
walking speed. Be ready as the lawn mower will immediately start moving
forward with this procedure.
1. With the lawn mower operating and the variable
speed control (3) in the“SLOW” or “START”
position, move the engage/disengage bar (2)
forward to the handlebars. (Fig AJ).
The mower will start to move forward.
NOTE: the lawn mower will immediately start
moving forward.
AI.
AJ.

196cc 4 Stroke Petrol Lawn Mower
AFTER SALES SUPPORT
e-mail: [email protected] 1800 909 909
MODEL No.: DM53E3-D196 • 10/2017 • 56979 (toll free)
AFTER SALES SUPPORT
(toll free)
196cc 4 Stroke Petrol Lawn Mower
e-mail: [email protected]1800 909 909
MODEL No.: DM53E3-D196 • 10/2017 • 56979
32 33
2. To increase the speed of the self propelled function, move the self propel
variable speed control (3) forwards towards the engine (22). (Fig AK)
3. To decrease the speed of the self propelled function, slowly push the self
propel variable speed control (3) backwards or towards the upper handle
bar (1) and the lawn mower will decrease in speed (Fig AK/AM).
4. To stop the self
propelled function,
release the self propel
engage/disengage
bar (2) and the mower
will cease forward
movement. (Fig AL)
AM.
AL.AK.
INCREASE + DECREASE -
The lawn mower
moves at its lowest
self propelled
speed when in
this position
The lawn mower
moves at its
highest self
propelled speed
when in this
position
Operation Maintenance
Replacing the Blades
NOTE. Before making any adjustment or
maintenance procedures to the lawn mower ensure
it is turned o and the spark plug lead is removed.
NOTE. Wear heavy gloves to protect your hands.
1. With the engine switched o, remove the hard
catcher (43) and lift the front of the lawn mower
upwards so the upper handle bar (1) sits on the
ground and the spark plug faces upwards.
2. Remove the blade bolt (31) using a 17mm spanner (not supplied) by
turning in an anti-clockwise direction (Fig AN), then remove the outer
ange and washer (32) (Fig AO). This allows you to be able to remove the
blade mounting plate (37) from the lawn mower.
3. To remove a single blade from the blade mounting plate (37), again use
a 17mm spanner (not supplied) to loosen and remove the nut, screw and
washers. (Fig AP/AQ)
NOTE: There is 1 washer located under the screw
on the outer side of the blade mounting plate (37),
and one on the underside of the blade mounting
plate in between the blade and blade mounting
plate (37). Be careful not to lose these (Fig AR).
AQA P.AO.
AR.
AN.
* SIDE VIEW
Maintenance

196cc 4 Stroke Petrol Lawn Mower
AFTER SALES SUPPORT
e-mail: [email protected] 1800 909 909
MODEL No.: DM53E3-D196 • 10/2017 • 56979 (toll free)
AFTER SALES SUPPORT
(toll free)
196cc 4 Stroke Petrol Lawn Mower
e-mail: [email protected]1800 909 909
MODEL No.: DM53E3-D196 • 10/2017 • 56979
34 35
4. Repeat the process to remove the other 3 blades.
5. Clean the dirt and grass from around the blade mounting area.
6. Replace all 4 blades to ensure a smooth even cut and re-t them on the
mower in the reverse direction they were removed.
7. Lastly, secure the nuts rmly, (20-25Nm) repeating this for the other
3 blades.
8. Replace the blade mounting plate (37) with new blades attached, then
the outer ange (32), followed by the blade bolt (31). Retighten the blade
bolt tightly (50 – 59Nm).
NOTE: Use a wooden block to stop the blade from turning. The 4 blades
should be tightened fully but check to ensure they can still swing back
if they were to hit a solid object. Where required tighten the bolts with a
torque wrench, the centre disc blade bolt torque: 50 – 59Nm and the four
blades torque: 20-25Nm. If you do not have a torque wrench ask a mower
service dealer to tighten the blade bolts before you use the mower.
Blades should be replaced when they become worn and no longer cut
the grass cleanly. The performance of grass catching can also reduce if the
blades become worn. Replacement blade sets are available for purchase
from www.extrabattery.com.au, or by calling 1800 909 909.
Removing Oil
IMPORTANT: Drain the oil while the engine in still warm to ensure rapid and
complete draining.
1. With the engine o but still warm, disconnect the spark plug cover and
make sure it is kept away from the spark plug (27).
2. Remove the oil drain plug (36) bolt (Fig AS), using a 10mm spanner (not
supplied) in an anti-clockwise direction to loosen (Fig AT)
WARNING:
Oil may be hot. AT .AS .
Maintenance Maintenance
3. Drain the oil into a suitable / approved container for the disposal of oils and
the like.
4. After the oil has drained, install and tighten the oil drain plug (36) Bolt.
5. Wipe up any spilt oil.
6. To rell the oil tank, follow the process on page 25.
NOTE: Please dispose of used engine oil in a manner that is compatible with
the environment. We suggest you take it in a sealed container to your local
service station for reclamation. Do not throw it in the trash or pour it into
the earth.
Air Cleaner Maintenance
The air cleaner system uses a pleated lter.
IMPORTANT A dirty air lter (28) will restrict air ow to the carburettor.
To prevent carburettor malfunction, service the air lter (28) regularly.
Check that the air lter (28) is clean and dry of dirt.
Filters thick with debris will not allow the engine to breathe and result in
dicult starting and poor engine performance.
The air lter (28) should be checked after approximately 25 hours of use,
or annually.
1. Open the air lter cover (29) by pushing in the rear tab (right hand side) to
release the clip, and then pushing the cover back and away to release the 2
front clips (Fig AU).
2. Open the air lter cover (29) and remove the air lter (28). ( Fig AV)
3. To loosen debris, gently tap the air lter (28) on a hard surface. If the lter is
excessively dirty, replace with a new lter.
4. Wash the lter in liquid detergent and water. Then allow it to thoroughly air
dry. Do not oil the lter.
5. Re-install the air
lter (28).
6. Close the air lter cover
(29) and secure the
fastener.
AV.AU.

196cc 4 Stroke Petrol Lawn Mower
AFTER SALES SUPPORT
e-mail: [email protected] 1800 909 909
MODEL No.: DM53E3-D196 • 10/2017 • 56979 (toll free)
AFTER SALES SUPPORT
(toll free)
196cc 4 Stroke Petrol Lawn Mower
e-mail: [email protected]1800 909 909
MODEL No.: DM53E3-D196 • 10/2017 • 56979
36 37
CAUTION. Never use fuel or low burning paint solvents to clean the lter.
A re or explosion could result.
CAUTION. Clean the lter in a solution of household detergent and warm
water. Ensure the lter is dry before re tting.
Replacement air lters are available for purchase from
www.extrabattery.com.au, or by calling 1800 909 909.
Spark plug
To ensure the engine is operating correctly, the spark plug (27) must be properly
gapped and free of carbon deposits. Always check the spark plug cable is rmly
tted to the top of the spark plug. The spark plug should be changed after
approximately 25 hours of use, or annually.
CAUTION. If the engine has been running, the muer will be very hot.
Be careful not to touch the muer.
1. Remove the spark plug cap (27) (Fig AW). With the supplied spark plug spanner
(34) remove the spark plug (Fig AX), and clean any deposits from the spark plug
(27) with a rag or damp cloth.
2. Visually inspect the spark plug (27). Discard the spark plug (27) if there is
apparent wear, or if the insulator is cracked or chipped.
3. Check that the end of the spark plug (27) is not blackened by carbon build
up. Clean with a soft wire brush if necessary.
4. Measure the plug gap with a feeler gauge. Correct as necessary by bending
the side electrode. The gap should be 0.7 - 0.8mm.
5. Thread the spark plug (27) in by hand to prevent cross-threading.
6. Once the spark plug (27) is seated, tighten with the supplied spark plug
spanner (34) to compress the washer.
NOTE. When installing a
new spark plug, tighten
1/2 turn after the spark
plug seats to compress
the washer.
7. Replace the spark plug
cap. ENSURE the cable
to the cap is in the TOP
position and is clear of
the carburettor rod.
AX.AW.
Maintenance Maintenance
CAUTION. The spark plug must be securely tightened. An improperly tightened
spark plug can become very hot and may damage the engine.
Replacement spark plugs are available from purchase from lawn mower or small
engine repair shops.
Deck Wash
The deck wash feature allows you to wash/clean the underside of the lawn
mower deck using a standard garden hose tting or the supplied standard hose
tting (38) (Fig AY)
WARNING: Stop the engine and unplug the spark plug before
undertaking any repairs or maintenance operations.
WARNING: It is recommended to wear gloves during this process so
as to not risk any personal injury from the blades when cleaning the
underside of the deck.
1. Position mower on a at and level section of grass, which will not cause
problems if the grass and surrounding area will get wet.
NOTE: It is NOT recommended to perform this operation on a concrete
surface as the concrete may be stained.
2. Remove the hard catcher (43) and ensure the rear
discharge guard (16) is closed.
3. Attach a standard quick connect garden hose
tting to the deck wash nozzle (19). (Fig AZ)
NOTE: If you do not have a standard garden hose
tting, use the supplied standard hose tting (38)
to connect to your garden hose. (Fig AY)
4. Raise the deck height to approximately mid height
using the 8 height adjustment lever (18).
5. Start the lawn mower and run at a low speed.
6. Turn on the water at the tap, then increase the
speed of the lawn mower so as to distribute the
water under the entire deck.
7. Run the process with the water running for approx 5 min or shorter if no
more grass is washing out from under the deck and then turn o the water.
Continue to run the lawn mower at medium speed for a few minutes to assist
in drying out the under deck.
8. Turn o the lawn mower and remove the standard hose tting (38) from the
deck wash nozzle (19).
NOTE: For general cleaning and maintenance of the mower, including the
housing, catcher, handles, levers and knobs, these can be cleaned using a rag
or damp cloth. Do not use chemicals or solvents.
AZ.
AY.