GardePro E8P User manual

TRAIL CAMERA
E8P
E8P MAX
INSTRUCTION MANUAL
Doc V1.0
Applicable for Models: E8P (includes models: E8P, E8PCF, E8PWF),
E8P Max (includes models: E8PMB, E8PMC, E8PMD)

Congratulations on your purchase of one of the best trail
cameras on the market! We appreciate your business and want
to earn your trust. Please refer to the notes below and the
instructions in this manual to ensure that you are completely
satisfied with this product.
In case of any further questions or concerns, please get in
touch with us at:
NA&UK: [email protected]
EU: [email protected]
or visit our page:
www.zopudt.com
Herzlichen Glückwunsch zum Kauf einer der besten
Wildkameras auf dem Markt! Wir bedanken uns für Ihren
Einkauf und Ihr Vertrauen. Bitte beachten Sie die Hinweise
hier unten und lesen Sie die Anweisungen in dieser Anleitung
sorgfältig durch, um sicherzustellen, dass Sie mit diesem
Produkt vollkommen zufrieden sind.
Sollten Sie weitere Fragen oder Bedenken haben, bitte
kontaktieren Sie uns ohne zu zögern unter:
NA&UK: [email protected]
EU: [email protected]
oder gehen Sie auf unsere Seite:
www.zopudt.com

TABLE OF CONTENTS (English)
1. IN THE BOX ...................................................................................1
2. IMPORTANT NOTE...................................................................... 1
3. INTRODUCTION ........................................................................... 2
4. PARTS AND CONTROLS .............................................................3
5. INSTALLING THE BATTERY AND SD CARD ......................... 7
6. USING THE CAMERA .................................................................. 9
7. THE OFF, ON, AND SURVEILLANCE MODES ........................ 9
7.1. OFF Mode ........................................................................10
7.2. ON Mode ..........................................................................10
7.3. SURVEILLANCE Mode ................................................... 10
8. Wi-Fi CONNECTION ...................................................................11
8.1. Download GardePro Mobile App ....................................11
8.2. Enable Wi-Fi and Bluetooth ............................................ 12
8.3. Add Your Camera............................................................ 12
8.4. Search Your Camera and Link.........................................13
8.5. App Navigation ................................................................ 15
8.6. Important Notes on App Wi-Fi Connection..................... 18
9. ADVANCED SETTINGS .............................................................19
10. MOUNTING AND POSITIONING ........................................... 24
10.1. Mounting........................................................................24
10.2. Sensing Angle and Distance Test...................................26
10.3. Starting ...........................................................................27
11. REVIEW PHOTOS OR VIDEOS...............................................28
12. TECHNICAL SPECIFICATIONS..............................................28
13. TROUBLESHOOTING .............................................................. 30

INHALTSVERZEICHNIS (Deutsche)
1. INHALT DER BOX ......................................................................32
2. WICHTIGE ANMERKUNG ........................................................ 32
3. EINFÜHRUNG ............................................................................. 33
4. KOMPONENTEN UND KONTROLLEN ................................... 35
5. BATTERIE UND SD-KARTE EINLEGEN .................................39
6. VERWENDUNG DER KAMERA ............................................... 41
7. ON-, OFF- UND ÜBERWACHUNGS-Modus............................ 42
7.1. OFF-Modus..................................................................... 42
7.2. ON-Modus........................................................................43
7.3. ÜBERWACHUNGS-Modus............................................. 43
8. Wi-Fi Verbindung ......................................................................... 44
8.1. Laden Sie die App "GardePro Mobile" herunter .............44
8.2. Wi-Fi und Bluetooth Aktivieren ....................................... 45
8.3. Ihrer Kamera Hinzufügen................................................45
8.4. Suchen Sie Ihre Kamera und verbinden .......................... 46
8.5. App Navigation ................................................................ 48
8.6. Wichtige Hinweise für die App-Wi-Fi-Verbindung......... 51
9. ERWEITERTE EINSTELLUNGEN ............................................ 52
10. MONTAGE UND POSITIONIERUNG ..................................... 59
10.1. Montage......................................................................... 59
10.2. Test Von Abtastwinkel Und Abstand ..............................61
10.3. Umschalten Von Funktionen Der Kamera .....................62
11. FOTOS ODER VIDEOS ANSEHEN ......................................... 63
12. DIE TECHNISCHEN DATEN ................................................... 64
13. FEHLERBESEITIGUNG ............................................................66

1
1. IN THE BOX
1 x Camera, 1 x Mounting Strap, 1 x Antenna, 1 x Camera
Instruction Manual, 1 x Mini USB Cord
1 x Lithium-ion Battery Pack (pre-installed), 1 x Battery
Instruction Manual, 1 x USB C to USB C Charging Cable, 1 x
USB C Female to USB Male Adapter
Note: USB power adapter is not included (user supplied).
2. IMPORTANT NOTE
2.1. About Battery
Please read the Battery Instruction Manual and Security
Requirements carefully before you use the battery pack to
power your trail camera for the first time, and keep it for
reference.
2.2. About Camera Storage
The E8P,E8PCF and E8PWF models require a standard-size
SDHC/SDXC memory card (maximum capacity 512GB, Class
10). Recommend using SanDisk 32GB SDHC Class 10
memory cards in the camera to obtain the best
cost-performance. Before first use, please format your SD
card in the camera by using "Format SD Card" in the
menu settings.
The E8P Max model comes with a built-in memory card.
Storage capacity varies from models. The model E8PMB has
32GB of storage, E8PMC has 64GB of storage, and E8PMD
has 128GB of storage.

2
2.3. About App Wi-Fi Connection
Please refer to Section 8 for details.
For better performance, we recommend that your phone is
within 15 meters (45 feet) of your camera. Since there may be
interference around, if the signal is not good, please move
closer to the camera gradually.
Legal attribution: Apple and the Apple Logo are trademarks of Apple Inc.,
registered in the U.S. and other countries. Google Play and the Google Play
logo are trademarks of Google LLC.
3. INTRODUCTION
3.1. About the Camera
The GardePro E8P series cameras are new generation of Wi-Fi
trail cameras. The cameras have a built-in Wi-Fi and Bluetooth
module, so that you can connect and operate the camera
through a dedicated app ("GardePro Mobile"). The Bluetooth
module, operating in low power, is used for device discovery,
and Wi-Fi is used for preview, image transmission and settings.
The cameras feature the all-new innovative and ultra-clear
imaging technology, encompasses smart night vision, blur
reduction, and noise reduction technology to deliver high
resolution image quality.
3.2. Main Features
Bluetooth connection for device discovery.
Wi-Fi connection for preview, playback, and settings.
8000mAh rechargeable battery.
High quality pictures (up to 48MP still photos), 1296P 20fps

3
or 1080P 30fps H.264 video clips with audio.
Clear night vision. The E8P,E8PCF and E8P Max models
are equipped with 36pcs high performance infrared no glow
940nm LEDs that function as a flash (invisible to eyes). The
E8PWF is equipped with 36pcs high-performance white
flash LEDs (visible to eyes).
Easy to use/program with well-designed operation buttons
and built-in 2.4-inch color screen, easy to program, review
pictures and videos on the screen.
3 working modes - Motion detection, Time lapse and
Hybrid.
Fast trigger time approx. 0.1~0.5 seconds (pre-activated
technology with 3 PIR sensors designed), Fast recovery time
of less than 0.5 seconds, Long trigger distance up to 90ft.
Info strip on each capture: Date, Time, Temperature &
Moon phase.
Operation Hours, Loop Recording, Time Lapse, Password
Protected.
Built for any climate - IP66, Operation Temperature: -4 ~
140°F / -20 ~ 60°C.
The E8P,E8PCF and E8PWF models support
SD/SDHC/SDXC memory card, maximum capacity 512GB
(not included).
4. PARTS AND CONTROLS
The camera is equipped with an antenna, 36pcs IR or White
LEDs, Indicator, Light Sensor, Optical Lens, PIR Sensors,
Lock Holes in front view (Figure 1).
TIP: During use, the black PIR Lens may be dirty or have
scratches, however it does not affect the performance due to
the reliability design. If you must clean it, please try to blow it
off or pick out the dirt very lightly. Please do not try to wipe it,

4
which may cause more scratches.
Figure 1: Front View
Install the antenna: The antenna is placed in the accessory
slot on the right side of the package box. Please screw the
antenna into the mounting base on the top of the camera and
securely tighten it (Figure 1).
The E8P,E8PCF and E8P Max models are equipped with
high-performance infrared no-glow 940nm LEDs, which serve
as a flash (invisible to human and animal eyes).
The E8PWF model is equipped with 36pcs high-performance
white flash LEDs, which serve as a flash (visible to human and
animal eyes).
LEDs
Lock Hole
Optics Lens
Central
PIR Lens
Light Sensor
Indicator
Lock Buckle
Antenna
Side PIR Lens
Side PIR Lens

5
The camera provides the following connections for external
devices: Mini USB port and DC power slot etc. (Figure 2).
Note: The E8P Max model comes with a built-in memory card,
so there is no SD card slot.
Figure 2: Bottom View
The camera has one security cable hole and two strap holes on
the back. The strap can be put through the strap holes and
fastened securely around a tree trunk by pulling the end of the
strap firmly (Figure 3).
Figure 3: Right / Back View
Tripod Base
1/4" - 20
SD Card
Holder
DC 12V/1A
Plug 5.5x2.1mm
Strap
Hole
Lock
Buckle
Mini USB Port
Microphone
Security
Cable Hole

6
The camera has a 2.4-inch built-in LCD screen, which can be
used for reviewing pictures or videos and menu displaying, and
exclusive keypad design for easy program and operation, a
rechargeable battery included (Figure 4).
Figure 4: Inside View
Figure 5: Operation Buttons
A power switch is used to power on (ON mode) or off the
camera (OFF mode). A START button is used to quickly
make the camera into the surveillance mode (motion detection)
or time lapse per your settings (Figure 5). When the camera is
Power
Switch
Surveillance
Mode
Color
Screen
Rechargeable
Battery
Operation
Buttons

7
in the surveillance mode, press the START button to wake up
the camera.
5. INSTALLING THE BATTERY AND SD CARD
Before you begin learning how to use your camera, you will
first need to insert an SD card (for the E8P,E8PCF and
E8PWF models). Although that may only take you a minute,
there are some important notes about battery and SD card you
should be aware of, so please take the time to read the
following directions and cautions:
5.1. Loading Battery
Check whether the battery pack is correctly installed (Figure
6).
Figure 6: Loading the Battery Pack
Charging
Indicator

8
5.2. Inserting the SD Card
For the E8P Max, you don't need to insert any SD card.
For the E8P,E8PCF and E8PWF models: insert the SD card
(with the camera powered off), before beginning to operate the
camera. Don't insert or remove the SD card when the camera is
powered on or in the surveillance mode (Figure 7).
Figure 7: Inserting the SD Card
The following describes how to insert and remove the SD card:
Insert the SD card into the card slot with its label side
upwards.A "click" sound indicates that the card is installed
successfully. If the wrong side of the card is facing up, you
will not be able to insert it without force, there is only one
correct way to insert cards. If the SD card is not installed
correctly, the device will not display an SD card icon on the
screen in ON mode.Formatting the SD card by using the
camera's "Format SD Card" menu option before first use is
recommended, especially when a card has been used in
other devices.
To take out the SD card, just gently push in the card (do not
try to pull it out without pushing in first). The card is
released from the slot and ready to be removed when you
hear the click. Be sure the camera's power is switched OFF
before inserting or removing SD cards or battery.

9
6. USING THE CAMERA
Once you've prepared your camera by properly installing
battery and an SD card (for the E8P,E8PCF and E8PWF
models), you could simply take it outside, strap it to a tree (or
not - according to your application scenario), switch it ON,
press START button and leave-and you might get some great
photos that are exactly what you wanted. However, we highly
recommend that you first spend some additional time indoors
with this manual and your camera until you know a bit more
about what those control keys do. If nothing else, you'll
probably want to at least set the date and time so the camera
will imprint them (or not-it's your option) on your photos as
they are taken, learn how to set the camera to shoot video clips
instead of still photos if you like, and read some tips about
mounting it on a tree.
7. THE OFF, ON, AND SURVEILLANCE MODES
The camera has three basic operational modes:
OFF mode: Power switch in the OFF position (The camera
is powered off).
ON mode: Power switch in the ON position (The camera is
powered on and its screen is on).
SURVEILLANCE mode: When the camera is powered on,
press START button to enter the surveillance mode. When
the screen is off, the camera enters standby and will perform
according to your settings.
App & Wi-Fi Connection:
You can use the app to connect the camera when the camera is
operating in the ON or SURVEILLANCE mode.

10
7.1. OFF Mode
The OFF mode is the "safe" mode when any actions must be
taken, e.g., replacing the SD card (for the E8P,E8PCF and
E8PWF models) or battery, or transporting the device. And of
course, when you are storing or not using the camera, you will
switch it to OFF. Please note that in the OFF mode the camera
still consumes a little power. It's a good idea to take the battery
out of the battery compartment if the camera will not be used
for a long time.
7.2. ON Mode
In the ON mode you can check and change the settings of the
camera with the help of its built-in screen. These settings,
found in the menu by pressing MENU key, let you change the
photo or video resolution, interval between photos, switch the
time imprint on, etc. (See more in Section 9 ADVANCED
SETTINGS).
On the screen display, you will see an information screen that
shows how many images have been taken, the battery level,
camera or video mode, etc.
ATTENTION PLEASE:In the ON mode, the camera will
automatically enter SURVEILLANCE mode if there is no
operation (key pressing) within 5minutes. Then the camera
will perform as your settings in the menu.
In the ON mode, you can connect the camera to a computer's
USB port to download your images.
7.3. SURVEILLANCE Mode
Any time after the battery and SD card (for the E8P,E8PCF

11
and E8PWF models) have been inserted, you can switch on the
camera. When the START button is pressed, the camera will
enter into the SURVEILLANCE mode. If the Mode in the
settings is set as "Motion Detection", the camera will count
down a 30-second delay and then be ready to capture images. If
the Mode is set as "Time Lapse", there will be no 30-second
counting down, and the camera will be ready to enter Time
Lapse.
Once in the SURVEILLANCE mode, no manual controls are
needed or possible (the control keys have no effect). The
camera will take photos or videos automatically (according to
its current parameter settings).
TIP: You can press the START button again to wake up the
camera and reprogram your camera if required.
8. Wi-Fi CONNECTION
8.1. Download GardePro Mobile App
Before using the Wi-Fi functionality, please download the
"GardePro Mobile" app.
NOTES:
The screenshots shown in this section are indicative only. The
actual diagram on different versions of app, iOS and Android
may differ.
During the use of the GardePro app (Referred to as app), please

12
grant the app access to Wi-Fi, Bluetooth, storage, location and
camera of your device, and enable the Local Network (if on
iOS14 or later), which are necessary to take pictures and
videos.
8.2. Enable Wi-Fi and Bluetooth
Enable Wi-Fi and Bluetooth on your mobile phone before
opening the app. This step is optional, however it can speed up
the connection between app and camera.
Figure 8: Enable Wi-Fi and Bluetooth
8.3. Add Your Camera
Ensure that your camera is in ON mode and in close proximity
to you. To establish a stable connection, move within 45ft of
the camera with no obstacles obstructing the signal, such as
walls or glass doors.
Open the app, tap Wi-Fi camera (Figure 9).

13
Figure 9: Tap to add your camera
NOTE: The app is an unified app, supports Wi-Fi camera and
cellular camera (sold separately).
8.4. Search Your Camera and Link
Figure 10: Select your camera
By default, in the list the camera will be indicated as ID
"NONAME_GardePro_E8P"(this manual uses the E8P
model as an example) if the camera name is not assigned. After
you set the camera name in settings, the camera ID will be
updated as "XXXX_GardePro_E8P" (XXXX is a 4-character

14
choice, you can set your camera name).
The app automatically searches for all Wi-Fi trail cameras
nearby, please make sure your camera is within the Wi-Fi
range. This process may take up to 15 seconds. If there is no
device shown in the list, please click the Refresh button on the
top-right corner.
Tap the one you want to add (Figure 10). The app starts
connecting to your camera. It might take up to 15 seconds to
build the Bluetooth and Wi-Fi connection between the app and
camera. There are 4 steps (Illustration omitted):
Step1 – Connecting through Bluetooth…
Step2 – Activating the camera…
Step3 – Searching Wi-Fi... The camera display will turn off
during Wi-Fi connecting.
Step4 – Connecting through Wi-Fi…
Figure 11: Allow Wi-Fi Connection on iOS Device
A system pop-up message will show (Figure 11).
Please tap "Join" to allow Wi-Fi connection. The string
"CAM8Z6_E9316A9F2066" is the name of Wi-Fi hotspot on
the camera to allow Wi-Fi connection. Among cameras, the
prefix CAM8Z6 is fixed, E9316A9F2066 is the internal camera
identifier which may vary from different cameras.
NOTE: On Android devices, there might be different system
pop-up messages that ask for allowing app connection to

15
camera since different mobile phone manufacturers may
modify and customize this system message.
After connected, a pop-up message would show as below:
Figure 12: Connected
Tap "Start" to enjoy your app journey (Figure 12).
8.5. App Navigation
The app supplies 4 main features：Camera, Status, Settings and
Gallery. See the Table 1 and Figure 13~16 for more details.

16
Table 1 - App Navigation
Features
Details
Refer to
Camera
Preview, manual taking pictures or
videos.
Note: When your Wi-Fi camera is
connected, motion detection will be
disabled. It will be enabled again
when you disconnect your Wi-Fi
camera or close the app for 90
seconds.
Figure 13
Status
Camera status, including battery
level, total memory card capacity
and used capacity, internal
temperature of the camera, number
of pictures and videos stored on the
memory card, camera model,
firmware version number, etc.
Figure 14
Settings
Display or program camera settings,
such as mode, picture quality etc.
Figure 15
Gallery
Review or download the pictures or
videos the camera has taken.
Figure 16