Stealth Cam STS-I550 User manual

Stealth Cam
STC-I550
User’s Manual
Toll Free Customer Support 1-877-269-8490
.stealthcam.net
Version 1.0 03/08
All manuals and user guides at all-guides.com
all-guides.com

STC-I550
www.stealthcam.net Toll Free 877-26 -84 0 2
For Customer Service or Warranty Information Call Toll Free
877-269-8490
Stealth Cam, LLC
P.O. Box 53 504
Grand Prairie, TX 75053- 504
www.steatlhcam.net
Stealth Cam Limited Warranty
Your Stealth Cam scouting camera is covered by a 0 days Limited Warranty
on parts and labor from the date of original purchase, and purchases must be
made through an authorized dealer. The warranty covers defects in
workmanship and materials. The warranty does not apply to units, which have
been damaged or abused intentionally or unintentionally. A purchase from
individuals or unauthorized internet sites voids the warranty.
Tampering with or altering the unit will void the warranty. Any unauthorized
service will void warranty. Original sales receipt must be produced for any
warranty service and a Return Authorization (RA) number must be obtained
from customer service at 877-26 -84 0 prior to returning product.
All manuals and user guides at all-guides.com

STC-I550
www.stealthcam.net Toll Free 877-26 -84 0 3
Manual Contents
Camera overview 4
Camera kit contents 8
Battery and memory Installation
Definitions 13
Set up and programming 15
Camera use 20
Mounting the camera 21
Viewing & Deleting images 26
Memory compatibility chart 33
Technical Specs 34
General Information 37
Moon Phase Chart 3
All manuals and user guides at all-guides.com

STC-I550
www.stealthcam.net Toll Free 877-26 -84 0 4
Camera overvie
Front housing image with major parts indication.
All manuals and user guides at all-guides.com

STC-I550
www.stealthcam.net Toll Free 877-26 -84 0 5
Open view image with major parts indication
For use with Stealth Cam cable
only. (sold separately)
All manuals and user guides at all-guides.com

STC-I550
www.stealthcam.net Toll Free 877-26 -84 0 6
Side view with major parts indication
All manuals and user guides at all-guides.com
all-guides.com

STC-I550
www.stealthcam.net Toll Free 877-26 -84 0 7
Picture / Image Capacity
SD card High Low Base AVI
16MB 13 17 32 8
32MB 26 34 64 16
64MB 52 68 128 32
128MB 104 136 256 64
256MB 208 272 512 128
512MB 416 544 1024 256
1 GB 832 1088 2048 512
2 GB 1664 2176 40 6 1024
NOTE: Picture / Image Capacity Chart provides approximate number of
images or AVI movies based on resolution setting and the size of
memory card. These figures may vary depending on the amount of
detail in the image.
All manuals and user guides at all-guides.com

STC-I550
www.stealthcam.net Toll Free 877-26 -84 0 8
Camera kit contents
• Model STC-I550 Digital Scouting Camera
• User Manual.
• USB cable.
• Strap.
All manuals and user guides at all-guides.com

STC-I550
www.stealthcam.net Toll Free 877-26 -84 0 9
Battery & memory installation
The Stealth Cam STC-I550 Advanced Digital Scouting Camera is
designed to operate using two different types of battery power options.
NOTE: Always have camera in the OFF position when installing or
removing batteries. Removing battery while the camera is in operation
may damage the camera.
Batteries “C” cell:
The internal battery compartment accepts 6 x “C” cell batteries. Be
sure to use high quality brand name alkaline batteries. Install batteries
with correct polarity (+/-) as noted inside the battery compartment.
Warn
ing:
Do not use different Voltage lead
acid battery other than the one specified in
this section. Doing so will damage the camera
and will void the warranty.
All manuals and user guides at all-guides.com

STC-I550
www.stealthcam.net Toll Free 877-26 -84 0 10
12V Lead Acid external battery
The STC-I550 is equipped with an external power jack designed to
accept a barrel plug cable to attach to a sealed lead acid battery. (sold
separately). This will enhance the camera’s field life. Battery cable and
complete 12V Lead Acid battery kits are available wherever Stealth
Cam scouting cameras are sold or call toll free 877-26 -84 0. Only
Stealth Cam external battery accessories are recommended.
• Insert the external battery barrel plug into the DC 12V jack on
the bottom of camera housing
• Turn the camera power on.
 Please make sure the voltage and polarity (+/-) are correct
before connection. Incorrect voltage or polarity (+/-) will
damage the camera.
Please note: When both internal and external batteries are connected,
the camera will draw power from the higher voltage
source first.
All manuals and user guides at all-guides.com

STC-I550
www.stealthcam.net Toll Free 877-26 -84 0 11
Memory Options
Your STC-I550 camera is equipped with 32MB built in flash memory.
The camera is also equipped with an expandable media card slot
capable of accepting up to 2GB SD card (sold separately). With no
memory card inserted into the slot, the camera will use the built in
32MB memory. If an SD card is inserted into the slot then the camera
will bypass the built in memory, and utilize the SD memory for image
storage. The front counter display will show the number of images on
the built in memory unless the expansion card is inserted at which point
the counter will only show the number of images in the expansion card.
Inserting SD card
ake sure camera is in the OFF position whenever adding or
removing memory.
• Insert SD memory card in to the SD card slot completely and in
the correct direction as shown by the sticker located at the side
of the housing.
• To remove the SD memory card, depress the SD card and pull
out the card gently.
All manuals and user guides at all-guides.com
all-guides.com

STC-I550
www.stealthcam.net Toll Free 877-26 -84 0 12
 SD cards must be clean (no images from other sources). If
you are using the SD card from other cameras, please
make sure to format the SD card in your computer using
FAT formatting, not FAT32, prior to use in the camera.
New cards are good to use straight from the package.
All manuals and user guides at all-guides.com

STC-I550
www.stealthcam.net Toll Free 877-26 -84 0 13
Definitions
• Time out: To set the amount of time in minutes the camera will
sleep between PIR triggering.
• Flash:
o Auto – Flash on base on surrounding light conditions.
o Off – Turn off the flash.
• Capture mode:
o 1P ~ 9P : 1 to burst mode image capturing per PIR
triggering.
o Video: 5 to 0 seconds adjustable video per PIR triggering.
• Resolution:
o 5.0M : Select this option to capture a 5.0M pixels image.
(High image quality)
o 3M : Select this option to capture a 3M pixels image. (Low
image quality)
o 1.3M : Select this option to capture a 1.3M pixels image.
All manuals and user guides at all-guides.com

STC-I550
www.stealthcam.net Toll Free 877-26 -84 0 14
(Base image quality)
o Video resolution (320 x 240): This is the resolution during
video capturing.
• Batteries Status: It shows the battery status.
o Full: It shows the battery is full.
o Lo : It shows the battery is low and front Low Battery
indicator will also blink.
 When the camera has detected low batteries, (Batteries are
lower then 5.8 +/-0.2Volts) the camera unit will power off
within 30 seconds automatically. Please replace with new
batteries; otherwise the camera will not work properly.
• Day and Time: Displays the date and time that you have set
on still image. For AVI it will appear on the last frame. (Using
Quick Time Player or Real Player).
• Moon phase and Temperature: Displays the moon phase and
temperature. For AVI it will appear on the last frame. (Using
Quick Time Player or Real Player).
All manuals and user guides at all-guides.com

STC-I550
www.stealthcam.net Toll Free 877-26 -84 0 15
Set up and Programming
When the camera is first turned on the internal LCD screen
displays the camera status. The follo ing information is present
on this screen.
Flash Mode Control:
The camera is pre-programmed ith Auto Flash setting.
• Switch the camera to ON position.
• To turn off the flash mode, press the [UP] button
once within 30 seconds. icon will appear on
the top of the screen.
• To turn on the flash mode back to Auto setting, press the [UP]
button the second time. icon will appear on the top of the
screen.
If no buttons are pressed after 30 seconds, the LCD screen will
power down to conserve battery life and enter 1 minute count
down to enter PIR detection mode. To re-power the display
All manuals and user guides at all-guides.com

STC-I550
www.stealthcam.net Toll Free 877-26 -84 0 16
screen, press and hold the UP or DOWN button until the status
screen appears.
Programming the Stealth Cam STC-I550
Switch the camera to the ON position. LCD screen will display the
camera status screen. Press the MENU button within 30 seconds to
enter programming mode.
If MENU button is not pressed within 30 seconds, camera will
automatically enter PIR detection mode.
Set the Resolution: The first program setting is resolution. The word
RESOLUTION will be blinking
• Press [OK] button to choose the selection
• Press the [UP] or [DN] button to select the desired resolution
(HIGH/LOW/BASE) and press [OK] to save and exit to
CAPTURING setting
Set the Capturing sequence. The Stealth Cam STC-I550 can be
programmed to shoot 1~9 pictures per triggering or 5~90 seconds
of video.
All manuals and user guides at all-guides.com
all-guides.com

STC-I550
www.stealthcam.net Toll Free 877-26 -84 0 17
• This word CAMERA will be blinking
• Press [OK] button to choose picture mode then press the [UP]
or [DN] button to select the desired capture setting (number of
pictures per triggering).
• Press [OK] to confirm your selection.
• If you want to choose video mode, when the word CAMERA is
blinking, press [UP] to choose video mode. Now the word
VIDEO will be blinking. Press [OK] to confirm your selection.
• Press [UP] or [DN] button to select the desired video length
(from 5 seconds to 0 seconds in 5 seconds increment)
• Press [OK] to save and exit to TIME OUT setting.
Set the Time out:
• The word TIME OUT will be blinking
• Press [OK] button to choose the selection. The digit will now
be blinking ready for change.
All manuals and user guides at all-guides.com

STC-I550
www.stealthcam.net Toll Free 877-26 -84 0 18
• Press [UP] or [DN] button to increase or decrease the time
value in minutes from 01 to 5 minutes.
• Press [OK] to save the setting and exit to Date & Time setting.
Set Date and Time: This camera uses the 24hr military time
format.
• The DATE will be blinking. Press [OK] one more time to enter
time setting first.
• Minute digit will be blinking. Press [UP] or [DN] to increase or
decrease the minute value (0 – 5 )
• Press [OK] to confirm the minute setting and enter hours
setting.
• Hour digit will be blinking. Press [UP] or [DN] to increase or
decrease the hour value (00 – 23)
• Press [OK] to confirm the hour setting and enter month setting.
• Month digit will be blinking. Press [UP] or [DN] to increase or
decrease the month value. (1 - 12)
All manuals and user guides at all-guides.com

STC-I550
www.stealthcam.net Toll Free 877-26 -84 0 19
• Press [OK] to confirm the month setting and enter date setting.
• Date digit will be blinking. Press [UP] or [DN] to increase or
decrease the date value. (01 – 31)
• Press [OK] to confirm the date setting and enter year setting.
• Year digit will be blinking. Press [UP] or [DN] to increase or
decrease the year value. Once this is done, press [OK]. You’ll
see the word {dEL} blink. Now press [MENU] to exit program
setting and back to status screen.
At the end of each program set up selection, you may press
[MENU] to exit and return to camera status ready screen for the 1
minute count do n mode to enter PIR capturing.
All manuals and user guides at all-guides.com

STC-I550
www.stealthcam.net Toll Free 877-26 -84 0 20
Using the camera
Once all program setting has been completed your Stealth Cam is
ready for field use.
Getting started
It is recommended that you mount the camera 4-5 ft off the ground
with the camera pointed at a slight downward angle. Be sure to avoid
mounting the camera facing east or west as the rising and setting of
the sun could produce false triggers and overexposed images. Clear
all branches and other debris away from the front of the camera so
as not to block the camera lens or PIR sensor.
PIR Coverage Area
Diagram
All manuals and user guides at all-guides.com