manuals.online logo
Brands
  1. Home
  2. •
  3. Brands
  4. •
  5. Garelick
  6. •
  7. Ladder
  8. •
  9. Garelick 19622-61 User manual

Garelick 19622-61 User manual

Installation Instructions for
“Out of Sight” Ladders
Form 12.105
ASSEMBLY INFORMATION
1. Check parts against parts list.
2. Read Instructions completely before starting assembly.
3. NOTE: This product uses locknuts for a secure assembly.
Locknuts thread on harder than conventional nuts and
require a screwdriver and wrench for attachment.
Refer to Fig. 1
1. Choose the most suitable side of your transom platform
for mounting the ladder. When mounting, locate a place
where the ladder will not interfere with the turning of the
motor or be excessively close to the propeller of your
boat.
2. Place the ladder under the deck where it will be mounted.
Make sure the area is flat and has enough space to
facilitate proper operation. Position it so that when stowed
it will protrude a minimum of 1/2" from the deck. Mark
this general area.
Refer to Fig. 2
3. Slide one mounting bracket (A) onto the main ladder
vertical as shown. Make sure it touches the slide bracket
(B), this will insure the ladder will store exactly as
positioned. NOTE: Slide bracket (B) is only supplied on 2
& 3 step model ladders.
4. Position the mounting bracket (A) with the ladder in the
area to be mounted as determined in Step 2. Mark the
bracket’s four mounting holes onto the deck surface.
Check the operation of the ladder before drilling the holes
for the following: A) When in “up” position, ladder is
stowed without hitting the transom. B) When in “down”
position, the ladder will angle out sufficiently for easy
ascent. C) The ladder will slide out; there is no deck trim
or moulding that will impede its operation. If this occurs,
make a shim under the mounting brackets that will bring
the ladder down far enough for proper operation.*
5. Drill the four marked holes with 5/16" drill bit. NOTE: It
is recommended to through bolt this ladder for best
results.
*NOTE: This might be necessary for pontoon boat installations.
Parts List
“Out of Sight” Ladder
Ref. Factory No.
Letter Part No. Req. Description
A 50.394 2 Large mounting bracket
C 06.135 2 Poly sleeve
D 50.392 2 Backing plate
E 03.085 8 1⁄4-20 x 21⁄4" machine screw
F 03.221 8 1⁄4-20 locknut
G 06.038 1 Securing strap
H 03.114 1 #8x1" s.s. screw
FIG. 1
FIG. 2
Write for
a Complete
Catalog
Phone: 651-459-9795
PO Box 8, 644 2nd Street E-mail: [email protected]
St. Paul Park, Minnesota 55071 On the Web: www.garelick.com
3/98
(over)
Refer to Fig. 3
6. Mount the ladder in place on one side by placing the poly
sleeve (C) into the mounting bracket (A), putting the ladder
into the bracket (A), and placing it up to the drilled holes.
Put the backing plate (D) on the deck and insert mounting
screws (E). Secure ladder in place with locknuts (F).
Refer to Fig. 4
7. Slide the other mounting bracket (A) onto the ladder
vertical as before. Center the ladder tubes within the
brackets and make sure they are parallel to each other.
Mark the hole locations of this bracket onto the deck. Drill
these holes and secure in place as in Step 6.
Refer to Fig. 5
8. Decide where you want to mount the strap assembly (G)
on the boat. Take the strap and fold it as illustrated. Fasten
the strap in place with screw (H). Secure the ladder in
place as shown.
NOTE: After securing the ladder with the strap, gently tug
on the tail of the strap to tighten ladder when underway.
Refer to Fig. 2
Operation
To Lower Ladder Unhook the strap assembly, slide out the
ladder extensions, the ladder will pivot down and lock in
place.
To Raise Ladder Grab the ladder vertical closest to the
deck, pull it up while rotating it parallel to the mounting
surface. Slide it under the deck, now slide in the additional
sections. Secure in place with strap assembly.
CAUTION: DO NOT USE LADDER WHEN BOAT’S MOTOR IS
RUNNING
STAINLESS STEEL CARE AND MAINTENANCE
TO ASSURE A CONTINUED BRIGHT FINISH, PROPER CARE
SUCH AS REGULAR FRESH WATER RINSING AND PERIODIC
CLEANING WITH A MILD ABRASIVE CLEANER SHOULD BE
DONE. WE USE ONLY TOP QUALITY 304 AND 316 ALLOY
IN THE STAINLESS STEEL PRODUCTS WE MANUFACTURE.
MANY FACTORS, DEPENDING ON LOCAL CONDITIONS
MAY CONTRIBUTE TO MINOR CORROSION. STAINLESS, LIKE
ANY OTHER METAL, IS NOT COMPLETELY FREE FROM
CORROSION ATTACK.
Installation Instructions – “Out of Sight” Ladders Form 12.105
FIG. 3
FIG. 4
FIG. 5

This manual suits for next models

3

Other Garelick Ladder manuals

Garelick 18019 User manual

Garelick

Garelick 18019 User manual

Garelick 19853 User manual

Garelick

Garelick 19853 User manual

Popular Ladder manuals by other brands

Decor Walther STONE HTLA Mounting instruction

Decor Walther

Decor Walther STONE HTLA Mounting instruction

safety platforms S.T.A. SYSTEM user guide

safety platforms

safety platforms S.T.A. SYSTEM user guide

Vestil VST-4-Y manual

Vestil

Vestil VST-4-Y manual

Power Step PSA-K930E-FS manual

Power Step

Power Step PSA-K930E-FS manual

Clarke FPL2 Operation & maintenance instructions

Clarke

Clarke FPL2 Operation & maintenance instructions

Youngman BoSS Room-Mate user guide

Youngman

Youngman BoSS Room-Mate user guide

Vestil COL HDG Series instruction manual

Vestil

Vestil COL HDG Series instruction manual

SP PARTNERS Rainbow Attic Stair Galaxy G2755 installation guide

SP PARTNERS

SP PARTNERS Rainbow Attic Stair Galaxy G2755 installation guide

WERNERCO BAILEY SUPA-LITE Series Assembly manual

WERNERCO

WERNERCO BAILEY SUPA-LITE Series Assembly manual

GIERRE PEPPina MEDIA manual

GIERRE

GIERRE PEPPina MEDIA manual

Stromberg Carlson Products LA-2022152 installation instructions

Stromberg Carlson Products

Stromberg Carlson Products LA-2022152 installation instructions

GIERRE Fast&Lock 200 quick start guide

GIERRE

GIERRE Fast&Lock 200 quick start guide

Little Giant CONQUEST ALL-TERRAIN Operation and maintenance manual

Little Giant

Little Giant CONQUEST ALL-TERRAIN Operation and maintenance manual

Mac allister AC9A manual

Mac allister

Mac allister AC9A manual

Next MALVERN 395510 Assembly instructions

Next

Next MALVERN 395510 Assembly instructions

Primal HEH00592 Instruction and safety manual

Primal

Primal HEH00592 Instruction and safety manual

Versaladder EN-131 Operating/safety instructions

Versaladder

Versaladder EN-131 Operating/safety instructions

True North TNT RISE SC 22LS instruction manual

True North

True North TNT RISE SC 22LS instruction manual

manuals.online logo
manuals.online logoBrands
  • About & Mission
  • Contact us
  • Privacy Policy
  • Terms and Conditions

Copyright 2025 Manuals.Online. All Rights Reserved.