Wenger Fixed Height Stairway 2-Step User manual

ImportantUserInformation � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 2
General �����������������������������������������2
Manufacturer �������������������������������������2
IntendedUse �������������������������������������2
Warranty ����������������������������������������2
SafetyPrecuations � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 3
RequiredTools� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 3
Fasteners� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 3
PartsList2-StepModel� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 4
PartsList3-Step,4-StepModels � � � � � � � � � � � � � � � � � � � � � � � � � 4
Assembly� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 5
Installation � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 8
AssemblyInstructions
Fixed Height Stairway
2-Step, 3-Step and 4-Step
©WengerCorporation2019 PrintedinUSA2019-10 Part#281A129-05
Wenger Corporation,555ParkDrive,P.O.Box448,Owatonna,Minnesota55060-0448
Questions?Call.....USA:(800)4WENGER(493-6437)•Worldwide:[phone]•wengercorp.com
Contents
Note: Pleasereadandunderstandtheseinstructionsbeforeassemblingtheparts.
Note: Removeallitemsfromtheshippingcartonsandarrangetheminaconvenientlocation.
Note: Ifyouneedadditionalinformation,contactWengerCorporationusingtheinformationbelow.
2-Step
Fixed Height Stairway
3-Step
Fixed Height Stairway
4-Step
Fixed Height Stairway

2
Important User Information
General
Copyright©2019byWengerCorporation
Allrightsreserved.Nopartofthecontentsofthismanualmaybereproduced,copied,ortransmittedinanyform
orbyanymeansincludinggraphic,electronic,ormechanicalmethodsorphotocopying,recording,orinformation
storageandretrievalsystemswithoutthewrittenpermissionofthepublisher,unlessitisforthepurchaser's
personaluse.
PrintedandboundintheUnitedStatesofAmerica.
Theinformationinthismanualissubjecttochangewithoutnoticeanddoesnotrepresentacommitmentonthe
partofWengerCorporation.WengerCorporationdoesnotassumeanyresponsibilityforanyerrorsthatmay
appearintheseinstructions.
InnoeventwillWengerCorporationbeliablefortechnicaloreditorialomissionsmadeherein,norfordirect,
indirect,special,incidental,orconsequentialdamagesresultingfromtheuseordefectoftheseinstructions.
Themanufacturerreservestherighttochangethisproductatanytime.
Theinformationinthisdocumentisnotintendedtocoverallpossibleconditionsandsituationsthatmightoccur.
TheendusermustexercisecautionandcommonsensewhenassemblingorinstallingWengerCorporation
products.Ifanyquestionsorproblemsarise,calltheWengerCorporationat(800)4WENGER(493-6437)
or[phone]worldwide.
Manufacturer
TheFixedHeightStairwayismanufacturedby:
 WengerCorporation
 555ParkDrive
 Owatonna,MN55060
 (800)4WENGER(493-6437)•+1(507)455-4100
 wengercorp.com
Intended Use
· Thisproductisintendedforindooruseinnormalambienttemperatureandhumidityconditions—
 itmustnotbeexposedtoprolongedoutsideweatherconditions.
· Thisproductisintendedtobeassembledonlyasdescribedintheseinstructions.
Warranty
Thisproductisguaranteedfreeofdefectsinmaterialsandworkmanshipforvefullyearsfromdate
ofshipment.Afullwarrantystatementisavailableuponrequest.

3
Fasteners
X001552 X003506 X250A516
X001848 X002546
X000065
X001434
X001552 X003506 X250A516
X001848 X002546
X000065
X001434
X001552 X003506 X250A516
X001848 X002546
X000065
X001434
X001552 X003506 X250A516
X001848 X002546
X000065
X001434
X001552 X003506 X250A516
X001848 X002546
X000065
X001434
X001552 X003506 X250A516
X001848 X002546
X000065
X001434
X001552 X003506 X250A516
X001848 X002546
X000065
X001434
Thefollowingtoolsarerequiredforassembly.
· 9/16"SocketorOpenEnd/BoxEndWrench
· 5/32"AllenWrench(includedinHardwarePack)
Required Tools
Self-Tapping Screw,
3/8-16 x 1"
1
Capscrew,
3/8-16 x 2"
2
Machine Screw,
1/4-20 x 2.36"
3
Lock Nut,
3/8-16
4
Carriage Bolt,
3/8-16 x 2"
5
Wing Nut,
3/8-16
6
Fiber Washer,
3/8" ID
13
Safety Precautions
Throughoutthisdocumentyoumayndcautionsandwarningswhicharedenedasfollows:
 •WARNING:Failuretofollowtheinstructioncouldresultinseriousinjuryordamagetoproperty.
•CAUTION:Failuretofollowtheinstructioncouldresultinminorinjuryordamagetoproperty.
Readallofthesesafetyinstructionsbeforeusingtheequipment.
Make sure that anyone working
with the xed height stairway
has read and understands these
instructions.
Failure to comply with the
Warnings and Cautions in this
document can result in damage
to property or serious injury.
!CAUTION !CAUTION

4
3-Step Model is shown
as an example.
7
Item 3-Step
Qty
4-Step
Qty
Description
1 12 16 Self-TappingScrew,
3/8-16x1"
222Capscrew,
3/8-16x2"
30 0
BaseMachineScrew,
1/4-20x2.36"
(2-StepModel)
444LockNut,3/8-16
(3-Step,4-StepModels)
5 4 4
CarriageBolt,
3/8-16x2"
(3-Step,4-StepModels)
622WingNut,3/8-16
734StepAssembly
811HandRailAssembly,
Left-Hand
911HandRailAssembly,
Right-Hand
10 0 0 CrossBrace
(2-StepModel)
11 1 1 CrossBase
(3-Step,4-StepModels)
12 2 2 ConnectionBracket
13 12 16 FiberWasher,3/8"ID
Parts List 3-Step and 4-Step Models
8
2
11
12
6
113
9
4
5
7
Item Qty Description
18Self-TappingScrew,
3/8-16x1"
22Capscrew,
3/8-16x2"
3 2
BaseMachineScrew,
1/4-20x2.36"
(2-StepModel)
40LockNut,3/8-16
(3-Step,4-StepModels)
50
CarriageBolt,
3/8-16x2"
(3-Step,4-StepModels)
62WingNut,3/8-16
72StepAssembly
81HandRailAssembly,
Left-Hand
91HandRailAssembly,
Right-Hand
10 1CrossBrace
(2-StepModel)
11 0CrossBase
(3-Step,4-StepModels)
12 2 ConnectionBracket
13 3 FiberWasher,3/8"ID
Parts List 2-Step Model
8
2
10
3
12
6
113
9

5
Assembly
1. Attachthestepassemblies(7)totheleft-hand(8)andright-hand(9)handrailassembliesusing
two3/8-16x1"self-tappingscrews(1)andtwo3/8"IDberwashers(13)oneachside.
Thewheelonbothofthehandrailassembliesmustfacetowardtheinsideasshown.
 Theberwasherswillhelpreducerubbingbetweenthestepassembliesandhandrailassemblies.
 Screwtheself-tappingscrewsthroughthepilotholesinthehandrailassemblyandintothe
channelsontheundersideofthestepassembly.
Right-Hand
Hand Rail Assembly
(9)
3/8-16 x 1"
Self-Tapping Screw
(1)
3-step model is shown as an example.
Step
Assembly
Channel
Left-Hand
Hand Rail Assembly
(8)
Step Assembly
(7)
3/8" ID
Fiber Washer
(13)
Front View
Wheels face inside

6
Assembly (continued)
2. Attachthecrossbrace(10)orcrossbase(11)dependingonmodel
tothehandrailassemblies.
2-Step Model
 Attachthecrossbrace(10)totheleft-hand(8)
andright-hand(9)handrailassembliesusingone
1/4-20x2.36"machinescrewineachsideasshown.
 Aligneachendofthecrossbracewiththebottompilotholein
eachhandrailassemblyandsecureusingamachinescrew
oneachend.
1/4-20 x 2.36"
Machine Screw
(3)
Cross
Brace
(10)
Bottom
pilot hole
3/8-16 x 2"
Carriage Bolt
(5)
Cross
Base
(11)
Top step is shown
removed for clarity.
Middle step is shown
removed for clarity.
3/8-16
Lock Nut
(4)
3-Step and 4-Step Models
 Attachthecrossbase(11)totheleft-hand(8)andright-hand(9)
handrailassembliesusingtwo3/8-16x2"carriagebolts(5)
andtwo3/8-16locknuts(4)ineachsideasshown.
 Aligneachendofthecrossbasewiththetwopilotholes
ineachhandrailassemblyandsecureusingthe
carriageboltsandlocknuts.

7
3. Attachoneconnectionbracket(12)toboththeleft-handrailassembly(8)and
theright-handrailassembly(9)usingone3/8-16x2"capscrew(2)andone3/8-16wingnut(6)
ineachasshown.
 Orienttheconnectionbracketaccordingtothetypeofstagebeingusedasreferencedbelow.
Dependingonthestairwaymodelandstagedeckelevation,alignthepilotholeineach
connectionbracketwitheitherthetop or bottompilotholeineachhandrailassembly
accordingtothechartbelowandsecureusingthecapscrewandwingnut.
3/8-16 x 3/4"
Wing Nut
(6)
Connection
Bracket
(12)
3/8-16 x 2"
Capscrew
(2)
TROUPER
Showmaster
VERSALITE New Stage
Top
pilot hole
Versalite®
Connection Bracket
Orientation
Trouper®
Connection Bracket
Orientation
Showmaster®
Connection Bracket
Orientation
StageTek®
Connection Bracket
Orientation
Bottom
pilot hole
Assembly (continued)
Stairway
Model
Stage Deck
Elevation
Connection
Bracket
Location
2-Step 16"(406mm) BottomHole
24"(610mm) TopHole
3-Step 24"(610mm) BottomHole
32"(813mm) TopHole
4-Step 32"(813mm) BottomHole
40"(1016mm) TopHole
Deck
surface
Deck
surface
Deck
surface
Deck
surface

8
Installation
1. Slightlytiltthexedheightstairwayforwardandslideitunderthestagesotheconnectionbrackets
willengagewiththeedgeofthestagedeckasshownonthepreviouspage.
2. Tiltthexedheightstairwaybacktothegroundtogripthestagedeck.
Toward Stage
Be sure all adjustment knobs and
fasteners are tight before using
the stairway.
!CAUTION
Connection
Bracket
Engage edge
of stage deck