Garmin nuvi 805 series Instruction manual

GARMIN.
nOvr 805 series
quick start manual
November 2008
© 2008 Garmin Ltd. or its subsidiaries
190-01047-01 Rev. A
Printed in Taiwan

Your nuvi Unit
WARNI G: See the Important Safety and Product Information guide in the product box for product warnings and other
important information.
Battery cover GPS antenna
Micro SO
card slot
<!) Power key:
slide to the left to turn the unit on/off;
slide to the right to lock the screen
Microphone
Mini-USB
connector
Speakers
Headphone/
audio out
jack
External
antenna
connector
Serial number
under battery
Microphone
WARNING: This product contains a lithium-ion battery.
To prevent damage, remove the unit from the vehicle
when exiting or store it out of direct sunlight.
Before mounting the ntivi, ee the Important Safety
and Product Information guide for information
about laws pertaining to windshield mounting
Garmin', the Garmin logo, and nlivi' are trademarks of
Garmin Ltd. or its subsidiaries registered in the USA and
other countries. Garmin Lock'" and nliMaps Guarantee'"
are trademarks of Garmin Ltd. or it subsidiaries. The e
trademarks may not be used without the express pemlission
of Gamlin. The Bluetooth' word mark and logos are owned
by the Bluetooth SIG, Inc., and any use of uch name by
Garmin is under license. Panoramio'" is a trademarks of
Google Inc.
2

Step 2: Mount the nuvi
1. Plug the vehicle power cable into the
power connector on the right side of the
cradle.
Power
cable
Microphone
jack
2. Snap the cradle Suction cup
onto the suction mount
cup arm.
3. Clean and dry
your windshield
and the suction
cup with a lint-free cloth. Remove the
clear plastic from the suction cup. Place
the suction cup on the windshield.
4. Flip the lever back, toward the
windshield.
5. Fit the bottom of your
nOvi into the cradle.
6. Tilt the nOvi back until it
snaps into place.
Step 1: Install the nuvi
Battery
1. Locate the rectangular lithium-ion battery
that came in the product box.
2. Slide the battery cover off the back of the
nOvi.
3. Locate the metal contacts on the end of
the lithium-ion battery.
4. Insert the battery so the metal contacts
on the battery match up with the metal
contacts inside the battery compartment.
Ways to Charge Your nuvi
• Use the vehicle power cable.
• Use the USB cable.
• Use an optional AC adapter cable.
5. Press the battery down into place.
6. Slide the battery cover back on until it
clicks into place.
3

7. Plug the other end of the vehicle power
cable into a power outlet in your vehicle.
Your unit should turn on automatically if it
is plugged in and the vehicle is running.
8. If you are using a traffic receiver in
Europe, secure the traffic receiver's
antenna to the windshield using the
suction cups. (The traffic receiver is
included in the nOvi 865 package.)
Step 3: Activate and Mount
the Speech Recognition
Remote Control
Pull the clear tab out of the remote control to
activate it.
Mount the remote control in a convenient
location in your vehicle, such as on your
steering wheel. Use the strap to secure the
remote control in place.
4
Step 4: Configure the nuvi
To tum on your niivi, slide the" Power
key to the left and let go after one second.
Follow the on-screen instructions.
Step 5: Acquire Satellites
Go outdoors to an open area, out of garages,
and away from tall buildings. Stop your
vehicle, and tum on the niivi. Acquiring
satellite signals may take a few minutes.
The m:J bars indicate GPS satellite
strength. When one bar is green, the niivi
has acquired satellite signals. Now you can
select a destination and navigate to it. For
more information about GPS, visit
www.garmin.com/aboutGPS.

Understanding the Menu
Page
CD
GPS satellite strength
®
Bluetooth® technology status
(Bluetooth technology is not available
on the nlivi 855.)
®
Battery status
@
Current time. Touch to change time
settings.
®
Select to find a destination.
®
Select to view the map.
(J)
Select to make a call when connected to
a compatible mobile phone.
®
Select to adjust the volume.
5
® Select to use the tools such as media
players, settings, and Help.
Finding an Address
1. Select Where to? > Address.
2. Select Change State/Province, if
necessary.
3. Select Search All.
OR
Select Spell City, enter the city/postal
code, and select Done. Select the
city/postal code in the list. (Not all
locations can be found using postal code
searching.)
4. Enter the number of the address, and
select Done.
5. Enter the street name, and select Done.
Select the correct street in the list, if
necessary.
6. Select the address, if necessary.
• NOTE: Depending on th~ version of the
maps loaded on your nuvl, the button
names can change and some steps could be
ordered differently.

Viewing the Main Pages
Touch View map to open the Map page.
• The vehicle icon shows your current location.
• Touch and drag the map to view a different area of the map.
• Touch e,'}> to zoom in, and touch = to zoom out.
• Touch Menu to return to the Menu page.
• A speed limit icon could appear as you travel on major roadways.
Touch to view the Trip
Computer.
Police
Stations
Fuel
Q Hospllals
Touch to view the Turn
List page.
Back Save location
""y LoGItlon"-, --,.--_
N38-52.874'
WO'M-,c73]9'
B.... 93ft:
.... r .... ddreu:
1105 AogMI ""
OI.tM. 1($ 66062
.... r ... lnterseclk»ftl
S Clalrborne Rd " S
-"oo
, Keep lett onto 1·635
Touch to view the
Where Am I? page.
Touch to view the Next
Turn page or the Lane
Assist page (if available).
6

Taking a Detour
1. With a route active, select Menu.
2. Select Detour.
If the current route is the only reasonable
option, the niivi might not calculate a detour.
You can also select specific detours while
navigating a route by using the Prompted
Detour feature. Select Tools> Settings>
Navigation> Prompted Detour. While
navigating a route, touch Detour on the
Menu page, and select a detour.
Adding a Stop (Via Point) to
Your Route
1. With a route active, select Menu>
Where to?
2. Search for the extra stop (via point).
3. Select Gol.
4. Select Add as Via Point to add this stop
before your destination. Select Set as
new Destination to make this your new
final destination.
• TIP: To add more than one stop, edit the
current route. Select Where to? > Routes.
7
Walking to a Destination
If you are walking to your destination, use
Pedestrian mode to optimize your route for
walking. Select Tools> Settings> System
> Usage Mode> Pedestrian> OK.
Securing Your nuvi
1. Select Tools> Settings> Security.
2. Select Garmin Lock.
3. Enter a 4-digit PIN and drive to a security
location.
• OTE: If you forget your PIN and your
security location, you must send your ntivi
to Garmin to get it unlocked. You must
also send a valid product registration or
proof of purchase.
Resetting the nuvi
If the niivi screen stops functioning, turn the
niivi off and on again. If this does not help,
slide the Power key to the left and hold it
there for a minimum of8 seconds. The niivi
should operate normally .
You can also remove the battery, and then
reinstall it.

Using Speech Recognition
Use the speech recognition feature to speak
to your niivi to find destinations, select
options, and perform other functions. The
speech recognition feature does not work for
all languages in all areas. See the owner's
manual at www.garmin.com for more
information.
Using the Remote Control
Use the remote control to start or stop a
speech recognition session.
Start speech
recognition
Stop speech
recognition
8
Voice Commands
1. Press the large button on the remote.
2. Wait for the = green speak icon to
appear.
3. Speak a command.
Using Speech Recognition
Speech recognition uses four search
methods:
• Speak any text on the screen
• Speak shortcut commands
• Speak the name of a popular place
• Speak an address
To speak any text on the screen:
1. Speak any word on the screen. For
example, from the Tools menu, you can
speak Routes or Page Down.
2. Listen for the voice prompt before
speaking your next command.

To speak shortcut commands:
1. Speak any shortcut command from the
Shortcut Commands table. You can use
shortcut commands from any screen.
2. Listen for the voice prompt before
speaking your next command.
Shortcut Commands
Audible Player
Cancel Route
Detour
Find Address
Find City
Find Favorite
Find Place by
Category
Find Place by Name
Find Recently Found
Go Home
Hands Free
Help
Main Menu
Music Player
Stop Listening
Tools Menu
Trip Computer
View Map
Volume Down
Volume Up
Where Am I?
Where To?
9
You can also speak Find earest to search
a location category. Location categories are
Point of Interest categories contained in
the niivi. The Find Nearest command only
works from the Menu page, Where to? page,
and Map page.
To search using the Find Nearest
shortcut command:
1. Speak Find Nearest followed by a Point
of Interest category, such as Italian
Restaurant.
Where to?
"Find Nearest Italian Restaurant"
Additional examples of Find Nearest
commands include:
• Find Nearest Gas Station
• Find Nearest Grocery Store
• Find Nearest Bank
• Find earest Movie Theater

To speak the name ofapopular place:
1. Speak Find Place by Name from any
screen.
4. Speak Yes to navigate to the place, or
speak No to go back to the list of found
places.
Where to?
"Find Place by Name"
2. Listen for the voice prompt, and speak
the name of the place. The nOvi repeats
the name of the place as it is searching.
'a, .•. - . ~ ~
Starbucks
3049 Las Yogas Blvd 5
Las \'egas, NY B9109
702·737·9717
"Yes"
To speak an address:
1. Speak Find Address from any screen.
2. Respond to the prompts to speak or spell
the city name, house number, and street.
Back Spell
Speak Popular Place Name
"Sfarbucks"
nliMaps Guarantee ™
To receive one free map update, register
your ntivi at http://my.garmin.com within
60 days of acquiring satellites. You are
not eligible for the free map update if you
register by phone or wait longer than 60
days after the first time your ntivi acquires
satellites. For more information, go to www
.garmin.com/numaps.
0.6 ~
O.aT SW
1,2T 5
1.lT SW
Starbucks
3200 las Vegas Blvd S
Starbucks
3049 las Vegas Blvd S
Starbucks
3300 las Vegas Blvd S
Starbucks
395 Hughes Center Or
3. A list of places appears. Speak the line
number of the place you want.
Back Spell
"Line 1"
10