Garudan GF-1130-448 MH/L34 User manual

User Manual
GF-1130-448 MH/L34
GF-2230-448 MH/L34
ANITA B s.r.o.
Průmyslová 2453/7
680 01 Boskovice
Czech republic
tel: [phone]
[phone]
fax: [phone]
e-mail: [email protected]
MP05300EN,MP05400EN_200120

© ANITA
MP05300EN,MP05400EN_200120 GF-1130-448,GF-2230-448 MH/L34 2
All rights reserved. Property of Anita B s.r.o. and protected by copyright.
The use of this content without written consent of Anita B s.r.o. is prohibited.
Copyright © Anita B s.r.o. (2020)
VERSION
DATE
APPROVED BY
MP05300EN,MP05400EN_200120
20. 1. 2020
Ing. Kamil Krátký
www.garudan.cz

© ANITA
MP05300EN,MP05400EN_200120 GF-1130-448,GF-2230-448 MH/L34 3
Content
ABasic Information...................................................................................................... 5
A1. Product description and intended use.............................................................................5
A2. Technical specifications ................................................................................................... 5
BSafety Instructions .................................................................................................... 6
B1. General instructions......................................................................................................... 6
B2. Installation precautions.................................................................................................... 6
B3. Operational safety instructions........................................................................................ 7
B4. Working safety instructions ............................................................................................. 7
B5. Disposal instructions ........................................................................................................ 8
CMachine Setup .......................................................................................................... 9
C1. Oil sump installation......................................................................................................... 9
DOperating Instructions............................................................................................. 10
D1. Replacing the needle .....................................................................................................10
D2. Threading the machine..................................................................................................11
D2.1. Threding the bottom thread................................................................................... 11
D2.2. Winding the bobbin ................................................................................................12
D2.3. Threading the upper thread ................................................................................... 13
D3. Adjusting the stitch length and reverse stitch...............................................................15
D4. Thread tension adjustment............................................................................................ 15
D4.1. Upper thread tension adjustment..........................................................................15
D4.2. Bottom thread tension adjustment........................................................................15
D5. Presser foot....................................................................................................................16
D5.1. Presser foot lift ....................................................................................................... 16
D5.2. Foot pressure adjustment....................................................................................... 16
D6. Hook safety clutch function...........................................................................................17
D7. Timing of the hook opener ............................................................................................17
D8. Timing of the hook and the needle................................................................................ 18
D9. Control buttons..............................................................................................................20
D10. Turning the LED light on/off ........................................................................................ 20
EMachine Maintenance............................................................................................. 21
E1. Lubricating the machine.................................................................................................21
E1.1. Lubricating the front part of the machine head ..................................................... 21
E1.2. Lubricating the machine head................................................................................. 21
E1.3. Refilling the oil sump............................................................................................... 22
E2. Adjusting the lubrication................................................................................................23
www.garudan.cz

© ANITA
MP05300EN,MP05400EN_200120 GF-1130-448,GF-2230-448 MH/L34 4
E2.1. Adjusting the lubrication of the hook ..................................................................... 23
E2.2. Adjusting the lubrication of the upper oil tank....................................................... 23
FTroubleshooting...................................................................................................... 24
GDrive Unit Manual................................................................................................... 25
G1. Safety instructions ......................................................................................................... 25
G2. Description and intended use of a drive unit ................................................................ 25
G3. Drive unit technical parameters .................................................................................... 25
G4. Installation ..................................................................................................................... 26
G4.1. Connector description ............................................................................................26
G4.2. Power supply and grounding.................................................................................. 27
G4.3. Connecting and settings .........................................................................................27
G5. Control panel ................................................................................................................. 28
G5.1. Control panel display ..............................................................................................28
G5.2. Operation panel keys description........................................................................... 30
www.garudan.cz

© ANITA
MP05300EN,MP05400EN_200120 GF-1130-448,GF-2230-448 MH/L34 5
ABASIC INFORMATION
A1. PRODUCT DESCRIPTION AND INTENDED USE
The machines are designated for use in the apparel, home textiles, accessories and footwear
production. It is suitable for making a car seat covers, sofas, leather bags, tents, etc. Triple
synchronous feed and special feeder provide smooth operation and even stitch even for
heavy materials. Characteristic features of this machine are low level of noise and vibrations
and large-capacity hook.
A2. TECHNICAL SPECIFICATIONS
Model
GF-1130-448 MH/L34
GF-2230-448 MH/L34
Number of needles
1
2
Needle gauge
-
6.4 mm / 7.9 mm /
9.5 mm / 12.7 mm
Use
Medium/Heavy materials
Stitch type
2-thread lockstitch
Max. stitch length
max. 9 mm
Hand lever foot lift
9 mm
Knee lever foot lift
19 mm
Needle system
135x17 for fabrics, 135x16 for leather
Needle size
Nm. 110 -180 *
Hook type
Vertical with ∅26 mm bobbin
Lubrication
Automatic with oil pump
Motor
Integrated servomotor 1x230V
Machine head weight
66 kg
68 kg
Table weight
27 kg
Working space
340 x 125 mm
Machine table dimensions
595 x 190 mm
Power
max. 850 W (for a short time during start-up)
Ground plan dimensions (including frame)
1200 x 550 mm
Bedplate height
740 –800 mm
Machine height including thread stand
1550 mm
Noise level under standard conditions
82 dB/A
Max. sewing speed
3000 st./min. **
* Machine is preset for needle Nm. 160
** Do not exceed specified sewing speed due to the service life of the machine mechanism.
This cannot be guaranteed under any conditions. It is necessary to reduce speed depending
on the thread, needle and material, stitch length and the foot track.
www.garudan.cz