Gate Titan User manual

1
July 2019
User manual

2
Table of Contents
1. Introduction..................................................................................................................................... 3
2. Basics and safety summary........................................................................................................... 4
2.1. Safety ...................................................................................................................................................................... 4
2.2. Installation .............................................................................................................................................................. 5
2.3. Usage....................................................................................................................................................................... 7
3. Firmware editions ........................................................................................................................... 9
4. TITAN Kits ..................................................................................................................................... 13
5. GATE Control Station (GCS).......................................................................................................... 15
5.1. Connecting TITAN to USB-Link and PC, MAC or Android Device......................................................................15
5.2. Status tab .............................................................................................................................................................18
5.3. Settings tab ..........................................................................................................................................................19
5.4. Sensors tab...........................................................................................................................................................22
5.5. Statistics tab.........................................................................................................................................................24
5.6. Diagnostic Trouble Codes (DTC) tab...................................................................................................................25
6. TITAN V2 ........................................................................................................................................ 26
6.1. TITAN V2 Advanced Set.......................................................................................................................................27
6.2. TITAN V2 Basic Module........................................................................................................................................28
6.3. Installation safety ................................................................................................................................................29
6.4. Installation ............................................................................................................................................................34
7. TITAN V3 ........................................................................................................................................ 51
7.1. TITAN Advanced Set ............................................................................................................................................52
7.2. TITAN Basic Module..............................................................................................................................................53
7.3. Installation safety ................................................................................................................................................54
7.4. Installation ............................................................................................................................................................56
8. TITAN V2 NGRS.............................................................................................................................. 72
8.1. TITAN Advanced Set ............................................................................................................................................73
8.2. TITAN Basic Module..............................................................................................................................................74
8.3. Installation safety ................................................................................................................................................75
8.4. Installation ............................................................................................................................................................78
9. Functions ....................................................................................................................................... 95
10. Legal Notice...............................................................................................................................100
10.1. PRODUCT DISPOSAL INSTRUCTIONS..............................................................................................................101
10.2. CERTIFICATE OF CONFORMITY ........................................................................................................................101

3
1. Introduction
Congratulations on your new TITAN, the rst in the world drop-in AEG Control System with
optical sensors. TITAN will transform your AEG into an advanced training weapon system. Gain
a tactical advantage thanks to the extremely fast trigger response, with an option of adjusting
the AEG for each mission with multiple functions. Give your AEG a new lease of life!
Congure your TITAN in the eld or simply update the rmware and adjust the settings using
the USB-Link and the GATE Control Station app which is available for PC/MAC and Android
devices.
With this guide, you will get familiar with all the functions and learn how to use them.

4
2. Basics and safety summary
Please read this manual before using the device to ensure safe and proper use.
Information contained in this document is subject to updating without notice. Please check if
you have downloaded the latest manual from the Technical Support section of our website:
https://www.gatee.eu/technical-support/manuals
The Product Warranty Form is also available there:
https://www.gatee.eu/technical-support/warranty
GATE Enterprise spółka z ograniczoną odpowiedzialnością sp. k. does not take any
responsibility for damages, injuries and accidents resulting from the use of this product or
the use of Air Electric Gun with the product installed. In case you have any diculties while
installing or using this product, we recommend to contact us. Our support team will answer all
your questions and send you some hints.
In order to contact GATE, you can:
a) email us at [e-mail]
b) contact us via Facebook: www.facebook.com/gatee
c) call ([phone]
Warning
Situations that could cause injury to yourself and others.
Caution
Situations that could cause damage to your device or other equipment.
Notice
Notes, usage tips, or additional information.
2.1. Safety
Notice
We recommend that this product should be installed by an experienced
airso service. Before starting installation process, please ensure
that your AEG is empty and there are no BBs inside.
Warning
Incorrectly connecting positive and negative battery terminals will cause
immediate damage to the drop-in module what is not covered by the
warranty and it can lead to re, burn or even battery explosion.

5
Warning
Stay careful to prevent short circuiting the battery as the consequences
can be very dangerous (re, battery explosion, burn).
2.2. Installation
Warning
Before starting installation process, please ensure that
your AEG is empty and there are no BBs inside.
Caution
The incorrect installation may result in sensors’ damage
what is not covered by the warranty.
Caution
Connectors should be bent according to the photo below. Bending
connectors in the opposite direction may cause them to break.

6
Notice
TITAN V2 and V3 do not support the Innite torque-up gears.
TITAN V2 NGRS supports the Innite torque-up gears.
Notice
Do not use too much grease. Excessive grease may cover gaps
between teeth what will cause improper cycle detection.
Notice
For your own safety, you should install an additional fuse between the battery
and the drop-in module. The fuse should be placed very close to the battery.
It will protect the battery in case of: (1) incorrectly connecting positive and
negative battery terminals; (2) shorting the power cords which connect
battery and TITAN; (3) mechanical damage to the drop-in module.

7
2.3. Usage
Warning
Do not attempt to connect the battery when the barrel of your
AEG is directed toward you, another person or an animal.
Notice
You should program your TITAN before the rst use.
Notice
TITAN requires rst-time calibration of sensors what
can be performed only with USB-Link.
Notice
Check the availability of TITAN rmware updates using the most recent GCS app:
https://www.gatee.eu/gcs . Using the most recent rmware versions ensures stable
functioning of the device and allows for taking advantage of all its features.
Notice
When you use the auto cell detection, ensure that your battery is charged.
The cell number may be incorrectly detected if your battery is discharged.
Notice
Before an airso game, we suggest to check the most recent conguration
and delete the registered Diagnostic Trouble Codes (DTC).
Caution
Prevent the USB-Link and the small end of the cable from contact
with conductive materials (e.g. dust, liquid, metal powder).
Warning
Too high trigger sensitivity might cause accidental shooting.
Warning
When an airso gun is not in use, its magazine must be
detached or kept empty with no BBs inside.
Notice
When an airso gun is not in use, its battery must be disconnected.
Warning
Do not store or carry ammable liquids, gases, or explosive materials in
the same compartment as the device, its parts, or accessories.

8
Caution
The device covers must not be removed by the user (e.g. foil or heat shrink tube).
Notice
Avoid using your device near strong electromagnetic elds or when
electrostatic discharges such as lightening occur in the atmosphere.

9
3. Firmware editions
The TITAN is currently available in two rmware editions: BASIC and ADVANCED. In the future,
the EXPERT edition will be also available. Thanks to the rmware editions, you do not need to
replace a drop-in unit - which is inside your AEG - to get more functions. Also, you do not have
to pay for functions that you do not need.
BASIC
The best for those who prefer simplicity
but require highest quality. Economic
version with limited number of functions.
ADVANCED
The best for those who like complex
solutions. Advanced version with wide
variety of functions. It enables access to
the Statistics and TITAN World Rankings.
In order to upgrade your TITAN rmware from BASIC to ADVANCED, you need to purchase the
upgrade. Follow the steps on the website: www.gatee.eu/editions or use GCS App for Android
devices. The upgrade will be available for installation immediately aer payment.

10

11

12

13
4. TITAN Kits
At this moment, TITAN is available for three dierent types of gearboxes. There is:
• TITAN V2 which is compatible with most V2 gearboxes
• TITAN V3 which is compatible with most V3 gearboxes
• TITAN V2 NGRS which is compatible with Tokyo Marui V2 NGRS gearboxes
Furthermore, TITAN V2 and TITAN V2 NGRS are divided in two types. Depending on where you
keep the battery, you can choose between FRONT and REAR wiring.
TITAN V3 has one universal type of wiring. If you have battery in buttstock, you can use
additional buttstock extension.
All the TITANs are available in two sets: Advanced Set and Basic Module.
Case 1
1. Do you have USB-Link? NO.
2. Do you prefer ADVANCED rmware or BASIC rmware edition? ADVANCED.
3. You should buy TITAN Advanced Set.
Case 2
1. Do you have USB-Link? YES.
2. Do you prefer ADVANCED rmware or BASIC rmware edition? ADVANCED.
3. You should buy TITAN Basic Module and Advanced Firmware Upgrade.

14
Case 3
1. Do you have USB-Link? NO.
2. Do you prefer ADVANCED rmware or BASIC rmware edition? BASIC.
3. You should buy TITAN Basic Module and USB-Link separately.
Case 4
1. Do you have USB-Link? YES.
2. Do you prefer ADVANCED rmware or BASIC rmware edition? BASIC.
3. You should buy TITAN Basic Module.

15
5. GATE Control Station (GCS)
GATE Control Station enables you to simply update the rmware and adjust the settings
using the USB-Link and the GATE Control Station™ app. Thanks to the GCS, you do not have
to remember complicated trigger sequences to program your unit. All the features are easily
accessible and simple to adjust with just one click.
Notice
At this moment, GCS can be used on PC/MAC and Android devices. iOS
will be supported aer release of GATE Bluetooth adapter.
We are constantly improving our applications. Each update brings new features and/or
corrections. All the changes are available in our changelog:
https://gatee.eu/technical-support/changelog
GCS allows you to:
• update or downgrade TITAN and USB-Link rmware
• upgrade TITAN rmware to ADVANCED or EXPERT edition
• change more than 20 TITAN settings
• calibrate trigger and re selector
• set trigger sensitivity
• check status of your TITAN sensors
• check statistics of your gun (rate of re, trigger response etc.)
• check diagnostic trouble codes (DTC)
• contact GATE Support Center (via error report, messenger or phone) [Android]
• receive in-app notications [Android]
5.1. Connecting TITAN to USB-Link and PC, MAC or Android Device.
Notice
You need the USB-Link and USB cable to connect TITAN with GATE Control Station.
Caution
Prevent the USB-Link and the ends of USB cable from contact with
conductive materials (e.g. dust, liquid, metal powder).
Notice
Do not remove the device cover.

16
1. Download and install GATE Control Station: www.gatee.eu/gcs
Notice
Your Android device must support OTG technology to run GATE Control Station app.
2. Connect the USB-Link to PC, MAC or smartphone using USB cable.
Notice
The dedicated GATE ‘Micro-USB Cable for USB-Link’ has the same connectors
on both sides. However, it is very important to which end of cable you
connect the USB-Link and smartphone. It will not work reversely.
Notice
If your USB-Link cannot be detected, please follow
instructions from GATE Control Station screen.
USB-Link has a 4-colour LED indicator.
BLUE (glowing)
The USB-Link is connected to a PC or smartphone. TITAN is not connected or a
PC driver is not installed. You can download the driver here:
www.gatee.eu/drivers
BLUE (blinking)
The USB-Link does not have an installed rmware. Please install the rmware.

17
GREEN (glowing)
The USB-Link is connected to TITAN and PC, MAC or smartphone.
GREEN (blinking)
The USB-Link is connected to TITAN and PC, MAC or smartphone, but the
TITAN does not have an installed rmware. Please install the TITAN rmware.
YELLOW (glowing)
The USB-Link is transmitting data.
RED (glowing)
Communication with the TITAN was interrupted while saving settings. The
TITAN settings may be transmitted incorrectly. Please check the connection
between the USB-Link and the TITAN.
3. Connect TITAN to USB-Link.
Notice
If your USB-Link cannot detect TITAN, please check if there is
the same issue with another PC, MAC or smartphone.
If the problem still occurs, please contact our Support Center. You can:
a) email us at [e-mail]
b) contact us via Facebook: www.facebook.com/gatee
c) call ([phone]

18
4. Now you can control TITAN via GATE Control Station.
During the rst start you will be asked to create your own prole. It is not obligatory but it will
help when you will be contacting our support.
5.2. Status tab
 The status TAB informs you about version, edition, type and serial number of the
connected device, as well as application version and server status.Here you can simply
update or „downgrade your device or upgrade rmware of your unit to ADVANCED or EXPERT
edition.

19
There are four icons in the upper right corner:
Mail - includes messages and newsletter
 Prole - allows you to change your privacy settings
 Options - here you can choose the language (future function), switch update inverval, turn
on/o the autosaving and sounds
Info - basic legal information
5.3. Settings tab
Settings tab was created in order to simplify the conguration of your TITAN.
Factory reset – (also called “Hard reset”) restores all default settings, resets your statistics
and clears adaptation data.
Default setting – restores only default settings.

20
Settings tab:
Fire selector mode – allows you to choose how your replica will behave on each re selector
position:
• SAFE – replica will not re aer trigger pull
• SEMI – one pull of the trigger will result in only one shot
• BURST – one pull of the trigger enables you to shoot a pre-determined
number of BBs, which is very useful in MILSLIM and when using low-caps
• AUTO – pulling the trigger causes uninterrupted* series
of shots until the trigger is released
*series can be limited by Round Limit
Pre-cocking mode – allows for initial spring compression, which speeds up the trigger
response signicantly:
• AUTO MODE – the spring is automatically compressed aer each shot
• TRIGGER MODE – slow trigger action compresses the
spring, and fast trigger action res the shot
Please note: using PRE-COCKING increases wear and tear on the gearbox.
Pre-cocking boost – determines the strength of spring compression. The highest setting
results in the best trigger response, but also mostly increases wear and tear on the gearbox.
If you are facing overspin issue, set GEAR RATIO to HIGH SPEED.
Burst mode:
• FULL – every, even the shortest trigger action res the pre-determined number of
rounds
• TRIGGER – releasing the trigger while ring stops the burst sequence.
Burst – allows you to set how many BBs will be red
ROF stabilization:
• ON – ROF Control uses PWM (Pulse Width Modulation) to decrease ROF. Thanks to this,
gearbox works smoothly what decreases wear and tear of AEG internal parts. The
percentage value determines the PWM duty cycle and it does not reect ROF decrease.
• OFF – ROF Control adds breaks between shots to decrease ROF. It gives you more
realistic experience. This option set to 50% will signicantly reduce the rate of re.
ROF control – enables a reduction in a gun’s rate of re. You use stronger LiPo batteries, and
still have a ROF just like in a real gun.
Sniper delay – lets you to set delay between each SEMI shots to simulate the delay from reload
or recoil. You can set 0.5s, 1s, 2s or 3s delay. By choosing ‘VIB’ option, you can enable vibration
which will inform you when the gun is ready to re again.