For answers to your Monogram,® GE Profile™or
GE®appliance questions, visit our website at
ge.com or call GE Answer Center®service,
800.626.2000.
Listed by
Underwriters
Laboratories
†Note: Check local codes for required breaker size
Important: Requires a 5" free area between the
bottom of the cooktop to any combustible material,
i.e., shelving. Free area not required when installing
wall oven underneath cooktop. Refer to installation
instructions. Requires a 15" minimum from cooktop to
adjacent overhead cabinets. Units are furnished with a
48" flexible armored cable.
Note: 30" Ribbon cooktops are approved for use over select GE 27" and GE 30"
Single Wall Ovens and Warming Drawers. Refer to cooktop and wall oven/
warming drawer installation instructions packed with product for current
dimensional data. If installed with a GE Profile™ Telescopic Downdraft System,
consult both the cooktop and downdraft installation instructions packed with
product before installing.
Cooktop gas/electric supply may need to be re-routed
to install downdraft.
Consult cabinet and countertop manufacturer’s specs for
flush mount installation prior to install. Before installing, consult installation
instructions packed with product for current dimensional data.
Filler Trim Kit: When replacing an old GE 30" cooktop (with larger opening)
use the following one-piece trim kit to fill in the over-size hole. Available at
additional cost. JXTR32W (True White) JXTR32B (Black glass with black,
white or bisque pattern)
KW Rating
240V 7.6
208V 5.7
Breaker Size
240V 40 Amps†
208V 30 Amps†
3-1/4*
Cooktop
2-1/2**
Required
28-1/2
19-5/8
29-3/4
30_color_cktp_install.eps
21-3/8
Electrical junction box 16" MIN.
below countertop
30" MIN. to
unprotected
cabinet
Cut should
not interfere
with cabinet
structure
at front
1-1/2
"
MIN.
clearance to
side wall
from cut-out
1-1/2
"
MIN.
clearance to
side wall
from cut-out
1-3/4
"
to
rear wall
13" MAX.
depth
*Depth of unit at conduit connection location (rear) is
6-1/2" on models PP980/975/950/945 and 4-5/8"
on models PHP900/PP972/962/942/932/912,
JP655/356/346.
**Raised bull nose countertops may require up to
3/8" additional clearance to prevent interference
with curved front.
15" MIN.
to cabinet
