GE JBP10 User manual

Skill Level: High Average Low
Completion Time: 1 to 3 Hours
Proper installation is the responsibility of the installer. Product failure due to improper installation
is not covered under the GE Appliance Warranty. See the Owners Manual for warranty
information.
CAUTION: Before you begin
Read these instructions carefully and
completely.
• IMPORTANT- Save these instructions for
local inspector’s use.
• IMPORTANT- Observe all governing codes
and ordinances.
Self Cleaning Free-Standing
Electric Range
Installation
Instructions EER2000, EER3000, EER3001, EER3002, JBP10, JBP24, JBP26, JBP30,
JBP35, JBP48, JBP64, JBP66, JBP68, JBP69, JBP71, JBP78, JBP80,
JBP82, JBP90, JBP91, JBP95, JB500, JB600, JB700, JB800
• NOTE TO INSTALLER- Be sure to leave
these instructions with the consumer.
• OWNER- Keep these instructions for future
reference.
• WARNING- This appliance must be
properly grounded.
Parts Included
Tools You Will Need
Pub. No. 31-10513
229C4053P493 1
“If you have questions, Call 800-GE-CARES or visit our website at:
www.GEAppliances.com”
1/4”Nut
driver
Adjustable wrench
Pencil
Materials Needed
Lag Bolts Anchor Sleeves
4- Wire Cord
4’long
3 -Wire Cord
4’long
(For Concrete Floors Only)
( UL Approved 40 AMP)
OR
;
;
;
y
y
y
Drill with
1/8” Bit
Anti-Tip Bracket and leg leveler
Safety
Glasses Tape Measure
Level
5/16” Hex Head
Nut driver
Phillips
Screwdriver
Flat-Bladed
Screwdriver
1
2
3
4

All rough-in and spacing dimensions must be met
for safe use of your range. Electricity to the range
can be disconnected at the outlet without moving
the range if the outlet is in the preferred location
(remove lower drawer).
To reduce the risk of burns or fire when reaching
over hot surface elements, cabinet storage space
above the cooktop should be avoided. If cabinet
storage space is to be provided above the
cooktop, the risk can be reduced by installing a
range hood that sticks out at least 5” beyond the
front of the cabinets. Cabinets installed above a
cooktop must be no deeper than 13”.
Be sure your appliance is properly installed and
grounded by a qualified technician.
Make sure the cabinets and wall coverings around
the range can withstand the temperatures (up to
200°F.) generated by the range.
WARNING: For personal safety
remove house fuse or open circuit
breaker before beginning
installation. Failure to do so could result in
serious injury or even death.
For Your Safety
2
Installation Instructions
IMPORTANT SAFETY INSTRUCTIONS
WARNING: To reduce the risk of
tipping, the appliance must be
secured by properly installed anti-tip
bracket packed with the appliance.
If you pull the range out and away from the wall
for any reason, make sure the Anti-Tip bracket
is engaged when the range is pushed back
against the wall.
WARNING
• All ranges can tip
• Injury to persons could result
• Install anti-tip bracket
packed with range
• See Installation Instructions

3
Installation Instructions
Pre- Installation Checklist
Move the Range Indoors
Open oven door and remove literature pack,
broiler pan and grid, and oven racks.
Remove packaging materials. Any packaging
materials must be removed during installation.
This will include adhesive tape, wire ties,
cardboard and protective plastic. Failure to
remove these materials could result in damage
to the appliance once the appliance has been
turned on and surfaces have heated.
Push the hinge locks down
toward the door frame, to the
unlocked position. This may
require a flat blade screwdriver.
Open the oven door as far
as it will go.
Remove Installation Instructions from
literature pack and read it carefully
before you begin. Be sure to place all
literature, Use and Care, Installation
Instruction, etc. in a safe place for
future reference.
Hinge
Unlocked
Position
Hinge
Slot
Hinge
Arm
EASY INSTALLATION OF YOUR NEW
30" WALL OVEN
Beforeyou begin-Read these instructions completely and carefully.
IMPORTANT-Save these instructions for local inspector's use.
IMPORTANT-OBSERVE ALL GOVERNING CODES AND ORDIANCES.
Noteto Installer- Be sure to leave these instructions with the consumer.
OWNER-Keep these instructions for future reference.
Note-This appliance must be properly grounded (if applicable).
Beforeyou begin-Read these
instructionscompletely and
carefully.
IMPORTANT-Save these
instructionsfor local inspector's use.
IMPORTANT-OBSERVE ALL
GOVERNINGCODES AND ORDIANCES.
Noteto Installer- Be sure to leave
theseinstructions with the consumer.
OWNER-Keep these instructions
forfuture reference.
Note-This appliance must be
properlygrounded (if applicable).
FORYOUR SAFETY
Beforeyou begin-Read these instructions completely and carefully.
IMPORTANT-Save these instructions for local inspector's use.
IMPORTANT-OBSERVE ALL GOVERNING CODES AND ORDIANCES.
Noteto Installer- Be sure to leave these instructions with the consumer.
OWNER-Keep these instructions for future reference.
Note-This appliance must be properly grounded (if applicable).
Beforeyou begin-Read these instructions completely and carefully.
IMPORTANT-Save these instructions for local inspector's use.
IMPORTANT-OBSERVE ALL GOVERNING CODES AND ORDIANCES.
Noteto Installer- Be sure to leave these instructions with the consumer.
OWNER-Keep these instructions for future reference.
Note-This appliance must be properly grounded (if applicable).
ELECTRICALREQUIREMENTS
Beforeyou begin-Read these
instructionscompletely and
carefully.
IMPORTANT-Save these
instructionsfor local inspector's use.
IMPORTANT-OBSERVE ALL
GOVERNINGCODES AND ORDIANCES.
Noteto Installer- Be sure to leave
theseinstructions with the consumer.
OWNER-Keep these instructions
forfuture reference.
Note-This appliance must be
properlygrounded (if applicable).
Beforeyou begin-Read these
instructionscompletely and
carefully.
IMPORTANT-Save these
instructionsfor local inspector's use.
IMPORTANT-OBSERVE ALL
GOVERNINGCODES AND ORDIANCES.
Noteto Installer- Be sure to leave
theseinstructions with the consumer.
OWNER-Keep these instructions
forfuture reference.
Note-This appliance must be
properlygrounded (if applicable).
Beforeyou begin-Read these
instructionscompletely and
carefully.
IMPORTANT-Save these
instructionsfor local inspector's use.
IMPORTANT-OBSERVE ALL
GOVERNINGCODES AND ORDIANCES.
Noteto Installer- Be sure to leave
theseinstructions with the consumer.
OWNER-Keep these instructions
forfuture reference.
Note-This appliance must be
properlygrounded (if applicable).
Beforeyou begin-Read these instructions completely and carefully.
IMPORTANT-Save these instructions for local inspector's use.
IMPORTANT-OBSERVE ALL GOVERNING CODES AND ORDIANCES.
Noteto Installer- Be sure to leave these instructions with the consumer.
OWNER-Keep these instructions for future reference.
Note-This appliance must be properly grounded (if applicable).
Beforeyou begin-Read these
instructionscompletely and
carefully.
IMPORTANT-Save these
instructionsfor local inspector's use.
IMPORTANT-OBSERVE ALL
GOVERNINGCODES AND ORDIANCES.
Noteto Installer- Be sure to leave
theseinstructions with the consumer.
OWNER-Keep these instructions
forfuture reference.
Note-This appliance must be
properlygrounded (if applicable).
FORYOUR SAFETY
Beforeyou begin-Read these instructions completely and carefully.
IMPORTANT-Save these instructions for local inspector's use.
IMPORTANT-OBSERVE ALL GOVERNING CODES AND ORDIANCES.
Noteto Installer- Be sure to leave these instructions with the consumer.
OWNER-Keep these instructions for future reference.
Note-This appliance must be properly grounded (if applicable).
Beforeyou begin-Read these instructions completely and carefully.
IMPORTANT-Save these instructions for local inspector's use.
IMPORTANT-OBSERVE ALL GOVERNING CODES AND ORDIANCES.
Noteto Installer- Be sure to leave these instructions with the consumer.
OWNER-Keep these instructions for future reference.
Note-This appliance must be properly grounded (if applicable).
ELECTRICALREQUIREMENTS
Beforeyou begin-Read these
instructionscompletely and
carefully.
IMPORTANT-Save these
instructionsfor local inspector's use.
IMPORTANT-OBSERVE ALL
GOVERNINGCODES AND ORDIANCES.
Noteto Installer- Be sure to leave
theseinstructions with the consumer.
OWNER-Keep these instructions
forfuture reference.
Note-This appliance must be
properlygrounded (if applicable).
Beforeyou begin-Read these
instructionscompletely and
carefully.
IMPORTANT-Save these
instructionsfor local inspector's use.
IMPORTANT-OBSERVE ALL
GOVERNINGCODES AND ORDIANCES.
Noteto Installer- Be sure to leave
theseinstructions with the consumer.
OWNER-Keep these instructions
forfuture reference.
Note-This appliance must be
properlygrounded (if applicable).
Beforeyou begin-Read these
instructionscompletely and
carefully.
IMPORTANT-Save these
instructionsfor local inspector's use.
IMPORTANT-OBSERVE ALL
GOVERNINGCODES AND ORDIANCES.
Noteto Installer- Be sure to leave
theseinstructions with the consumer.
OWNER-Keep these instructions
forfuture reference.
Note-This appliance must be
properlygrounded (if applicable).
Beforeyou begin-Read these instructions completely and carefully.
IMPORTANT-Save these instructions for local inspector's use.
IMPORTANT-OBSERVE ALL GOVERNING CODES AND ORDIANCES.
Noteto Installer- Be sure to leave these instructions with the consumer.
OWNER-Keep these instructions for future reference.
Note-This appliance must be properly grounded (if applicable).
Beforeyou begin-Read these
instructionscompletely and
carefully.
IMPORTANT-Save these
instructionsfor local inspector's use.
IMPORTANT-OBSERVE ALL
GOVERNINGCODES AND ORDIANCES.
Noteto Installer- Be sure to leave
theseinstructions with the consumer.
OWNER-Keep these instructions
forfuture reference.
Note-This appliance must be
properlygrounded (if applicable).
FORYOUR SAFETY
Beforeyou begin-Read these instructions completely and carefully.
IMPORTANT-Save these instructions for local inspector's use.
IMPORTANT-OBSERVE ALL GOVERNING CODES AND ORDIANCES.
Noteto Installer- Be sure to leave these instructions with the consumer.
OWNER-Keep these instructions for future reference.
Note-This appliance must be properly grounded (if applicable).
Beforeyou begin-Read these instructions completely and carefully.
IMPORTANT-Save these instructions for local inspector's use.
IMPORTANT-OBSERVE ALL GOVERNING CODES AND ORDIANCES.
Noteto Installer- Be sure to leave these instructions with the consumer.
OWNER-Keep these instructions for future reference.
Note-This appliance must be properly grounded (if applicable).
ELECTRICALREQUIREMENTS
Beforeyou begin-Read these
instructionscompletely and
carefully.
IMPORTANT-Save these
instructionsfor local inspector's use.
IMPORTANT-OBSERVE ALL
GOVERNINGCODES AND ORDIANCES.
Noteto Installer- Be sure to leave
theseinstructions with the consumer.
OWNER-Keep these instructions
forfuture reference.
Note-This appliance must be
properlygrounded (if applicable).
Beforeyou begin-Read these
instructionscompletely and
carefully.
IMPORTANT-Save these
instructionsfor local inspector's use.
IMPORTANT-OBSERVE ALL
GOVERNINGCODES AND ORDIANCES.
Noteto Installer- Be sure to leave
theseinstructions with the consumer.
OWNER-Keep these instructions
forfuture reference.
Note-This appliance must be
properlygrounded (if applicable).
Beforeyou begin-Read these
instructionscompletely and
carefully.
IMPORTANT-Save these
instructionsfor local inspector's use.
IMPORTANT-OBSERVE ALL
GOVERNINGCODES AND ORDIANCES.
Noteto Installer- Be sure to leave
theseinstructions with the consumer.
OWNER-Keep these instructions
forfuture reference.
Note-This appliance must be
properlygrounded (if applicable).
Beforeyou begin-Read these instructions completely and carefully.
IMPORTANT-Save these instructions for local inspector's use.
IMPORTANT-OBSERVE ALL GOVERNING CODES AND ORDIANCES.
Noteto Installer- Be sure to leave these instructions with the consumer.
OWNER-Keep these instructions for future reference.
Note-This appliance must be properly grounded (if applicable).
Beforeyou begin-Read these
instructionscompletely and
carefully.
IMPORTANT-Save these
instructionsfor local inspector's use.
IMPORTANT-OBSERVE ALL
GOVERNINGCODES AND ORDIANCES.
Noteto Installer- Be sure to leave
theseinstructions with the consumer.
OWNER-Keep these instructions
forfuture reference.
Note-This appliance must be
properlygrounded (if applicable).
FORYOUR SAFETY
Beforeyou begin-Read these instructions completely and carefully.
IMPORTANT-Save these instructions for local inspector's use.
IMPORTANT-OBSERVE ALL GOVERNING CODES AND ORDIANCES.
Noteto Installer- Be sure to leave these instructions with the consumer.
OWNER-Keep these instructions for future reference.
Note-This appliance must be properly grounded (if applicable).
Beforeyou begin-Read these instructions completely and carefully.
IMPORTANT-Save these instructions for local inspector's use.
IMPORTANT-OBSERVE ALL GOVERNING CODES AND ORDIANCES.
Noteto Installer- Be sure to leave these instructions with the consumer.
OWNER-Keep these instructions for future reference.
Note-This appliance must be properly grounded (if applicable).
ELECTRICALREQUIREMENTS
Beforeyou begin-Read these
instructionscompletely and
carefully.
IMPORTANT-Save these
instructionsfor local inspector's use.
IMPORTANT-OBSERVE ALL
GOVERNINGCODES AND ORDIANCES.
Noteto Installer- Be sure to leave
theseinstructions with the consumer.
OWNER-Keep these instructions
forfuture reference.
Note-This appliance must be
properlygrounded (if applicable).
Beforeyou begin-Read these
instructionscompletely and
carefully.
IMPORTANT-Save these
instructionsfor local inspector's use.
IMPORTANT-OBSERVE ALL
GOVERNINGCODES AND ORDIANCES.
Noteto Installer- Be sure to leave
theseinstructions with the consumer.
OWNER-Keep these instructions
forfuture reference.
Note-This appliance must be
properlygrounded (if applicable).
Beforeyou begin-Read these
instructionscompletely and
carefully.
IMPORTANT-Save these
instructionsfor local inspector's use.
IMPORTANT-OBSERVE ALL
GOVERNINGCODES AND ORDIANCES.
Noteto Installer- Be sure to leave
theseinstructions with the consumer.
OWNER-Keep these instructions
forfuture reference.
Note-This appliance must be
properlygrounded (if applicable).
Beforeyou begin-Read these instructions completely and carefully.
IMPORTANT-Save these instructions for local inspector's use.
IMPORTANT-OBSERVE ALL GOVERNING CODES AND ORDIANCES.
Noteto Installer- Be sure to leave these instructions with the consumer.
OWNER-Keep these instructions for future reference.
Note-This appliance must be properly grounded (if applicable).
Beforeyou begin-Read these
instructionscompletely and
carefully.
IMPORTANT-Save these
instructionsfor local inspector's use.
IMPORTANT-OBSERVE ALL
GOVERNINGCODES AND ORDIANCES.
Noteto Installer- Be sure to leave
theseinstructions with the consumer.
OWNER-Keep these instructions
forfuture reference.
Note-This appliance must be
properlygrounded (if applicable).
FORYOUR SAFETY
Beforeyou begin-Read these instructions completely and carefully.
IMPORTANT-Save these instructions for local inspector's use.
IMPORTANT-OBSERVE ALL GOVERNING CODES AND ORDIANCES.
Noteto Installer- Be sure to leave these instructions with the consumer.
OWNER-Keep these instructions for future reference.
Note-This appliance must be properly grounded (if applicable).
Beforeyou begin-Read these instructions completely and carefully.
IMPORTANT-Save these instructions for local inspector's use.
IMPORTANT-OBSERVE ALL GOVERNING CODES AND ORDIANCES.
Noteto Installer- Be sure to leave these instructions with the consumer.
OWNER-Keep these instructions for future reference.
Note-This appliance must be properly grounded (if applicable).
ELECTRICALREQUIREMENTS
Beforeyou begin-Read these
instructionscompletely and
carefully.
IMPORTANT-Save these
instructionsfor local inspector's use.
IMPORTANT-OBSERVE ALL
GOVERNINGCODES AND ORDIANCES.
Noteto Installer- Be sure to leave
theseinstructions with the consumer.
OWNER-Keep these instructions
forfuture reference.
Note-This appliance must be
properlygrounded (if applicable).
Beforeyou begin-Read these
instructionscompletely and
carefully.
IMPORTANT-Save these
instructionsfor local inspector's use.
IMPORTANT-OBSERVE ALL
GOVERNINGCODES AND ORDIANCES.
Noteto Installer- Be sure to leave
theseinstructions with the consumer.
OWNER-Keep these instructions
forfuture reference.
Note-This appliance must be
properlygrounded (if applicable).
Beforeyou begin-Read these
instructionscompletely and
carefully.
IMPORTANT-Save these
instructionsfor local inspector's use.
IMPORTANT-OBSERVE ALL
GOVERNINGCODES AND ORDIANCES.
Noteto Installer- Be sure to leave
theseinstructions with the consumer.
OWNER-Keep these instructions
forfuture reference.
Note-This appliance must be
properlygrounded (if applicable).
Beforeyou begin-Read these instructions completely and carefully.
IMPORTANT-Save these instructions for local inspector's use.
IMPORTANT-OBSERVE ALL GOVERNING CODES AND ORDIANCES.
Noteto Installer- Be sure to leave these instructions with the consumer.
OWNER-Keep these instructions for future reference.
Note-This appliance must be properly grounded (if applicable).
Beforeyou begin-Read these
instructionscompletely and
carefully.
IMPORTANT-Save these
instructionsfor local inspector's use.
IMPORTANT-OBSERVE ALL
GOVERNINGCODES AND ORDIANCES.
Noteto Installer- Be sure to leave
theseinstructions with the consumer.
OWNER-Keep these instructions
forfuture reference.
Note-This appliance must be
properlygrounded (if applicable).
FORYOUR SAFETY
Beforeyou begin-Read these instructions completely and carefully.
IMPORTANT-Save these instructions for local inspector's use.
IMPORTANT-OBSERVE ALL GOVERNING CODES AND ORDIANCES.
Noteto Installer- Be sure to leave these instructions with the consumer.
OWNER-Keep these instructions for future reference.
Note-This appliance must be properly grounded (if applicable).
Beforeyou begin-Read these instructions completely and carefully.
IMPORTANT-Save these instructions for local inspector's use.
IMPORTANT-OBSERVE ALL GOVERNING CODES AND ORDIANCES.
Noteto Installer- Be sure to leave these instructions with the consumer.
OWNER-Keep these instructions for future reference.
Note-This appliance must be properly grounded (if applicable).
ELECTRICALREQUIREMENTS
Beforeyou begin-Read these
instructionscompletely and
carefully.
IMPORTANT-Save these
instructionsfor local inspector's use.
IMPORTANT-OBSERVE ALL
GOVERNINGCODES AND ORDIANCES.
Noteto Installer- Be sure to leave
theseinstructions with the consumer.
OWNER-Keep these instructions
forfuture reference.
Note-This appliance must be
properlygrounded (if applicable).
Beforeyou begin-Read these
instructionscompletely and
carefully.
IMPORTANT-Save these
instructionsfor local inspector's use.
IMPORTANT-OBSERVE ALL
GOVERNINGCODES AND ORDIANCES.
Noteto Installer- Be sure to leave
theseinstructions with the consumer.
OWNER-Keep these instructions
forfuture reference.
Note-This appliance must be
properlygrounded (if applicable).
Beforeyou begin-Read these
instructionscompletely and
carefully.
IMPORTANT-Save these
instructionsfor local inspector's use.
IMPORTANT-OBSERVE ALL
GOVERNINGCODES AND ORDIANCES.
Noteto Installer- Be sure to leave
theseinstructions with the consumer.
OWNER-Keep these instructions
forfuture reference.
Note-This appliance must be
properlygrounded (if applicable).
Beforeyou begin-Read these instructions completely and carefully.
IMPORTANT-Save these instructions for local inspector's use.
IMPORTANT-OBSERVE ALL GOVERNING CODES AND ORDIANCES.
Noteto Installer- Be sure to leave these instructions with the consumer.
OWNER-Keep these instructions for future reference.
Note-This appliance must be properly grounded (if applicable).
Beforeyou begin-Read these
instructionscompletely and
carefully.
IMPORTANT-Save these
instructionsfor local inspector's use.
IMPORTANT-OBSERVE ALL
GOVERNINGCODES AND ORDIANCES.
Noteto Installer- Be sure to leave
theseinstructions with the consumer.
OWNER-Keep these instructions
forfuture reference.
Note-This appliance must be
properlygrounded (if applicable).
FORYOUR SAFETY
Beforeyou begin-Read these instructions completely and carefully.
IMPORTANT-Save these instructions for local inspector's use.
IMPORTANT-OBSERVE ALL GOVERNING CODES AND ORDIANCES.
Noteto Installer- Be sure to leave these instructions with the consumer.
OWNER-Keep these instructions for future reference.
Note-This appliance must be properly grounded (if applicable).
Beforeyou begin-Read these instructions completely and carefully.
IMPORTANT-Save these instructions for local inspector's use.
IMPORTANT-OBSERVE ALL GOVERNING CODES AND ORDIANCES.
Noteto Installer- Be sure to leave these instructions with the consumer.
OWNER-Keep these instructions for future reference.
Note-This appliance must be properly grounded (if applicable).
ELECTRICALREQUIREMENTS
Beforeyou begin-Read these
instructionscompletely and
carefully.
IMPORTANT-Save these
instructionsfor local inspector's use.
IMPORTANT-OBSERVE ALL
GOVERNINGCODES AND ORDIANCES.
Noteto Installer- Be sure to leave
theseinstructions with the consumer.
OWNER-Keep these instructions
forfuture reference.
Note-This appliance must be
properlygrounded (if applicable).
Beforeyou begin-Read these
instructionscompletely and
carefully.
IMPORTANT-Save these
instructionsfor local inspector's use.
IMPORTANT-OBSERVE ALL
GOVERNINGCODES AND ORDIANCES.
Noteto Installer- Be sure to leave
theseinstructions with the consumer.
OWNER-Keep these instructions
forfuture reference.
Note-This appliance must be
properlygrounded (if applicable).
Beforeyou begin-Read these
instructionscompletely and
carefully.
IMPORTANT-Save these
instructionsfor local inspector's use.
IMPORTANT-OBSERVE ALL
GOVERNINGCODES AND ORDIANCES.
Noteto Installer- Be sure to leave
theseinstructions with the consumer.
OWNER-Keep these instructions
forfuture reference.
Note-This appliance must be
properlygrounded (if applicable).
Beforeyou begin-Read these instructions completely and carefully.
IMPORTANT-Save these instructions for local inspector's use.
IMPORTANT-OBSERVE ALL GOVERNING CODES AND ORDIANCES.
Noteto Installer- Be sure to leave these instructions with the consumer.
OWNER-Keep these instructions for future reference.
Note-This appliance must be properly grounded (if applicable).
Beforeyou begin-Read these instructions completely and carefully.
IMPORTANT-Save these instructions for local inspector's use.
IMPORTANT-OBSERVE ALL GOVERNING CODES AND ORDIANCES.
Noteto Installer- Be sure to leave these instructions with the consumer.
OWNER-Keep these instructions for future reference.
Note-This appliance must be properly grounded (if applicable).
EASY INSTALLATION OF YOUR NEW
30" WALL OVEN
Beforeyou begin-Read these
instructionscompletely and
carefully.
IMPORTANT-Save these
instructionsfor local inspector's use.
IMPORTANT-OBSERVE ALL
GOVERNINGCODES AND ORDIANCES.
Noteto Installer- Be sure to leave
theseinstructions with the consumer.
OWNER-Keep these instructions
forfuture reference.
Note-This appliance must be
properlygrounded (if applicable).
FORYOUR SAFETY
Beforeyou begin-Read these instructions completely and carefully.
IMPORTANT-Save these instructions for local inspector's use.
IMPORTANT-OBSERVE ALL GOVERNING CODES AND ORDIANCES.
Noteto Installer- Be sure to leave these instructions with the consumer.
OWNER-Keep these instructions for future reference.
Note-This appliance must be properly grounded (if applicable).
ELECTRICALREQUIREMENTS
Beforeyou begin-Read these
instructionscompletely and
carefully.
IMPORTANT-Save these
instructionsfor local inspector's use.
IMPORTANT-OBSERVE ALL
GOVERNINGCODES AND ORDIANCES.
Noteto Installer- Be sure to leave
theseinstructions with the consumer.
OWNER-Keep these instructions
forfuture reference.
Note-This appliance must be
properlygrounded (if applicable).
Beforeyou begin-Read these
instructionscompletely and
carefully.
IMPORTANT-Save these
instructionsfor local inspector's use.
IMPORTANT-OBSERVE ALL
GOVERNINGCODES AND ORDIANCES.
Noteto Installer- Be sure to leave
theseinstructions with the consumer.
OWNER-Keep these instructions
forfuture reference.
Note-This appliance must be
properlygrounded (if applicable).
Beforeyou begin-Read these
instructionscompletely and
carefully.
IMPORTANT-Save these
instructionsfor local inspector's use.
IMPORTANT-OBSERVE ALL
GOVERNINGCODES AND ORDIANCES.
Noteto Installer- Be sure to leave
theseinstructions with the consumer.
OWNER-Keep these instructions
forfuture reference.
Note-This appliance must be
properlygrounded (if applicable).
Broiler Pan
and Grid
Oven Racks
Literature
Pack
EASY INSTALLATION OF YOUR NEW
FREE-STANDING RANGE
Beforeyou begin-Read these instructions completely and carefully.
IMPORTANT-Save these instructions for local inspector's use.
IMPORTANT-OBSERVE ALL GOVERNING CODES AND ORDIANCES.
Noteto Installer- Be sure to leave these instructions with the consumer.
OWNER-Keep these instructions for future reference.
Note-This appliance must be properly grounded (if applicable).
Beforeyou begin-Read these
instructionscompletely and
carefully.
IMPORTANT-Save these
instructionsfor local inspector's use.
IMPORTANT-OBSERVE ALL
GOVERNINGCODES AND ORDIANCES.
Noteto Installer- Be sure to leave
theseinstructions with the consumer.
OWNER-Keep these instructions
forfuture reference.
Note-This appliance must be
properlygrounded (if applicable).
FORYOUR SAFETY
Beforeyou begin-Read these instructions completely and carefully.
IMPORTANT-Save these instructions for local inspector's use.
IMPORTANT-OBSERVE ALL GOVERNING CODES AND ORDIANCES.
Noteto Installer- Be sure to leave these instructions with the consumer.
OWNER-Keep these instructions for future reference.
Note-This appliance must be properly grounded (if applicable).
Beforeyou begin-Read these instructions completely and carefully.
IMPORTANT-Save these instructions for local inspector's use.
IMPORTANT-OBSERVE ALL GOVERNING CODES AND ORDIANCES.
Noteto Installer- Be sure to leave these instructions with the consumer.
OWNER-Keep these instructions for future reference.
Note-This appliance must be properly grounded (if applicable).
ELECTRICALREQUIREMENTS
Beforeyou begin-Read these
instructionscompletely and
carefully.
IMPORTANT-Save these
instructionsfor local inspector's use.
IMPORTANT-OBSERVE ALL
GOVERNINGCODES AND ORDIANCES.
Noteto Installer- Be sure to leave
theseinstructions with the consumer.
OWNER-Keep these instructions
forfuture reference.
Note-This appliance must be
properlygrounded (if applicable).
Beforeyou begin-Read these
instructionscompletely and
carefully.
IMPORTANT-Save these
instructionsfor local inspector's use.
IMPORTANT-OBSERVE ALL
GOVERNINGCODES AND ORDIANCES.
Noteto Installer- Be sure to leave
theseinstructions with the consumer.
OWNER-Keep these instructions
forfuture reference.
Note-This appliance must be
properlygrounded (if applicable).
Beforeyou begin-Read these
instructionscompletely and
carefully.
IMPORTANT-Save these
instructionsfor local inspector's use.
IMPORTANT-OBSERVE ALL
GOVERNINGCODES AND ORDIANCES.
Noteto Installer- Be sure to leave
theseinstructions with the consumer.
OWNER-Keep these instructions
forfuture reference.
Note-This appliance must be
properlygrounded (if applicable).
Follow directions on the front of the shipping
carton to remove the outer carton and packing
materials.
Preparing the Range
The shipping base should be removed before
taking the range indoors.
Leave door handle protection on the range
until installation is completed.
Slip appliance dolly
UNDER THE SIDE
when moving the
range indoors. Do
not handle from the
front or rear, damage
will occur.
Close the oven door to the
broil stop position.
Place hands on both sides of the
door. As you close the door, lift up
and away from the range.
Lift door up until the hinges
clear the slots.
DO NOT LIFT THE DOOR
BY THE HANDLE!
NOTE: The oven door is very heavy. Be sure you have
a firm grip before lifting the oven door off the hinges.
Use caution once the door is removed. Do not lay the
door on its handle. This could cause dents or scratches.
Hinge
Clears
Slot
Protect the kitchen floor! Flatten and place a
piece of the shippiing carton in front of the
installation location to protect the flooring.

4
Installation Instructions
Installation Required Clearances
A
***6"
MIN
**30" MIN
**15" MIN
*0" *0"
See Ilustrations below for all rough-in and spacing
dimensions.
The range may be placed with 0” clearance (flush) at
the back wall and side walls of the cabinet.
MINIMUM DIMENSIONS BETWEEN
COOKTOP, WALLS, AND ABOVE THE
COOKTOP.
* Make sure the wall covering, countertop
and cabinets around the range can with-
stand the heat (up to 200°F.) generated by
the range.
** Allow 30” Minimum clearance between
surface units and bottom of unprotected
wood or metal cabinet, and 15” Minimum
between countertop and adjacent cabinet
bottom.
*** Recommended spacing to heat sensitive
surfaces.
7 1/2"
30"
36"
2 1/2"
Acceptable electrical
outlet area.
Orient the electrical
receptacle so the
length is parallel to the floor. 25"
2 1/2"
NOTE: Use a 4 foot power cord to prevent interference
with the storage drawer. Power cords 4.5 or 6 foot long
may have to be dressed to allow for proper drawer closing.

5
Installation Instructions
Electrical Connections
B
B1 Making the Electrical Connection
Remove the wire cover (on the back of the
range) by removing 5 screws using a 1/4” nut
driver. Do not discard these screws.
B2 All new constructions, mobile
homes and installations where
local codes do not allow
grounding through neutral.
This appliance must be supplied with the proper
voltage and frequency, and connected to an
individual properly grounded branch circuit;
protected by a circuit breaker or fuse having
amperage as specified on the rating plate. The
rating plate is located above the storage drawer
on the oven frame.
We recommend you have the electrical wiring
and hookup of your range connected by a
qualified electrician. After installation, have the
electrician show you where your main range
disconnect is located.
Check with your local utilities for electrical codes
which apply in your area. Failure to wire your
oven according to governing codes could result in
a hazardous condition. If there are no local
codes, your range must be wired and fused to
meet the requirements of the National Electrical
Code, ANSI/NFPA No. 70-Latest Edition. You can
get a copy by writing:
National Fire Protection Association
Battery March Park
Quincy, MA 02269
Effective January 1, 1996, the National Electrical
Code requires that new, but not existing,
construction utilize a 4 conductor connection to
an electric range. When installing an electric
range in new construction, follow the instructions
in the section on NEW CONSTRUCTION AND
FOUR CONDUCTOR BRANCH CIRCUIT
CONNECTION.
You must use a three-wire, single-phase A.C.
208Y/120 Volt or 240/120 Volt, 60 hertz electrical
system. If you connect to aluminum wiring,
properly installed connectors approved for use
with aluminum wiring must be used.
Electrical Requirements
STRAIN
RELIEF
WIRE
COVER
3
RE
When reinstalling the one-piece wire
cover, make sure that wires do not
become pinched between wire cover
and mainback.
These will require a four-wire flexible cord kit. If
the range is rated between 8,750 and 16,500
watts, the cord kit must be rated for 40 amps-
125/250 volts. If the range is rated between
16,501 and 22,500 watts, the cord kit must be
rated for 50 amps-125/250 volts. For existing
construction, a three wire flexible cord kit may
be used, and the same ratings apply as de-
scribed above.
• When using a cord kit rated 40 Amps, remove
the knockout in the connection plate. You
must use a clamp or strain relief to hold the
cord.
• Terminations must be either closed loop
terminals or open end spade lugs.
• On some models, a filter capacitor may be
connected between the black and white leads
on the junction block.
continued on following page
5 Screws to
remove
wire cover

Installation Instructions
Electrical Connections cont.
B
B3 Complete 4 wire
cord kit. Below are
step by step
instructions on
how to install the
kit.
B4 Remove the screws on
the terminal block with
a 1/4” nut driver or
phillips screwdriver.
Remove
3 screws
B5
B6 Remove the ground
screw using a 5/16”
nut driver, then
remove and discard
the ground strap. Do
not discard the
ground screw, you
will need it later.
B7 Install the four-wire
cord and strain
relief through the
hole in the
connection plate.
NEW CONSTRUCTION AND FOUR
WIRE CORD CONNECTION KIT
6
3 Screws
Gound
Screw and
Ground Strap
Location
Strain
Relief
Clamp
Connection
Plate
Knockout in center
of connection plate
may be taken out
B8 Attach the green lead
below the junction
block with the ground
screw that was
removed earlier.
B9 Connect the red
and black leads to
the outside
terminals and the
white lead to the
center terminal.
B10 Push the cord upward (to relieve strain),
while tightening the strain relief clamp.
B11 Re-install the wire cover with the 5
screws removed earlier. Make sure the
wires do not become pinched between
the wire cover and mainback.
Wire
Cover
Three-wire connection continued on following page
Ground
Screw
Ground
Strap
Ground
Screw
Red or
Black White
Red or
Black
Ground
(Green)
Connection
Plate
Strain
Relief
Clamp
4 wire
cord kit

Installation Instructions
Electrical Connections cont.
B
B3a Complete 3
wire cord kit.
Below are step
by step
instructions on
how to install
the kit.
B4a Remove the screws on
the terminal block with a
1/4” nut driver or phillips
screwdriver.
Remove
3 screws
B5a
B6a Install the three-wire
cord and strain
relief through the
hole in the
connection plate.
THREE- WIRE CORD CONNECTION KIT
7
Knockout in center
of connection plate
may be taken out
B7a
B8a
Connect the outer wires to the outside
terminals and the center wire to the
center terminal. Do not remove the
ground strap
Push the cord upward (to relieve strain),
while tightening the strain relief clamp.
B9a Re-install the wire cover with the 5
screws removed earlier. Make sure the
wires do not become pinched between
the wire cover and mainback.
Wire
Cover
Special note: If local codes require an
undgrounded neutral, you must do the
following:
a. Remove ground strap.
b. Fasten the white wire to the center terminal.
c. Use grounding terminal or lead to ground unit
in accordance with local codes.
3
Screws
Grounded
Neutral
Terminal
(White)
Ground Strap
Ground Screw
Strain
Relief
Clamp
Connection
Plate
Center
Wire
Connection
Plate
Strain
Relief
Clamp
3 wire
cord kit
Outer
Wire
Center
Wire Outer
Wire
Grounded
Neutral
Terminal
(White)

8
Installation Instructions
Installing the Anti-Tip Bracket
C
a. For concrete installation you will need two
1/4"x 1-1/2" lag screws, and two sleeve
anchors.
b. Locate the center of the four holes identified
in Fig. 1 as Floor-Concrete and Wall. Drill
the recommended size holes in each.
c. Install the sleeve anchors into the predrilled
concrete holes and install the lag and wall
screws through the Anti-Tip bracket. Make
sure the screws are securely tightened.
a. Locate the centers of the four holes identified
in Fig. 1 as Floor-Wood and Wall.
b. Drill a 1/8" pilot hole through the pre-marked
areas. Note the angle of the wall screw in
Fig. 2.
c. Mount the Anti-Tip bracket with the four
screws provided.
Locating The Bracket
a. Decide whether the bracket will be
installed on the right or left side of range
location.
b. If the bracket side of the range has an
adjacent cabinet, place the bracket
against the back wall and cabinet as
shown in Fig. 1. If there is a countertop
overhang, offset the bracket by the
amount of overhang. If there is no
adjacent cabinet, place the bracket to the
outside edge of the range side panel and
back wall.
Fig. 1
Installing The Bracket in Wood
or Concrete
C1
INSTALLATION–WOOD CONSTRUCTION
I NSTALLATION–CONCRETE CONSTRUCTION
C2
Fig. 2
The anti-tip bracket, provided with your literature
and broiler pan, must be properly installed to
prevent the range from tipping. Please refer to
the instructions provided with your anti-tip
bracket.
Adjacent Cabinet
Or Final Location
Of Range Side Panel Wall
Floor-Wood
Bracket
Side
Rear
Leveling
Leg Floor-Concrete
AttachmentToWall
Bracket Wall
Plate
Screw Must
EnterWood
Or Metal

9
Installation Instructions
Installing the Range
D
D4 When installation is
complete and the
range is in place,
inspect to be sure the
rear leveling leg is fully
inserted into the slot of
the Anti-Tip Bracket.
Final Check of the Anti-Tip Bracket
D1 Pull the drawer
out until it stops
Storage Drawer Removal
D2 Lift the front of
the drawer until
the stops clear
the guide.
D3 Remove the
drawer.
D5
Install the oven racks.(See Owner’s
Manual for instructions.)
Put a spirit level or a glass
measuring cup partially
filled with water on one of
the oven racks.
Remove the
storage drawer.
The front leveling
legs can be
accessed from the
bottom and the
rear legs from the
top.
Level the Range
D6
D8
The range must be level for proper cooking and
baking.
Use an adjustable wrench to adjust all four
leg levelers until the range is level.
Continued on following page
D9 Pick the Oven Door up
by placing both hands on
each side. The door is
heavy so you may need
help. Do not lift the door
by the handle.
Place the notch of the
hinge arm into the bot-
tom edge of the hinge
slot.
Open the oven door
as far as it will open.
Push the hinge locks
up against the front
frame of the oven
cavity, to the locked
position.
Close the oven door.
D10
D11
D12
CAUTION: The oven door is heavy.
You may need help lifting the door
high enough to slide it into the
hinges slots. Do not lift the door by
the handle.
Replacing the Oven Door
D13
LOWER
RANGE
RAISE
RANGE
LEG
LEVELER
SPIRIT
LEVEL
D7
Hinge in
Locked Position
Notch of
Hinge Securely
Fitted into Bottom
of Hinge Slot
Stop
Hinge Arm
Bottom Edge
Of Slot
Hinge Notch

10
Installation Instructions
Installing the Range cont.
D
Place the drawer
rail on the guides.
Replacing the Storage Drawer
D13
Push the drawer
in until it stops.
D14
Lift the front of the drawer and push in
until the stops clear the guides.
IF DRAWER WON'T CLOSE
Remove and replace, making sure the power
cord is not obstructing the drawer and/or the
rail is in the guide.
IF DRAWER IS CROOKED
Lower the front of the drawer and
push in until it closes.
Remove and replace making sure the rail is in
the guide.
SPECIAL INSTRUCTIONS IF YOU HAVE
PROBLEMS WHILE REPLACING THE
STORAGE DRAWER
D16
Stop
D15
Drawer Does
Not Close
Completely
Power Cord May Be
Obstructing Drawer
InThis Area
Drawer Front Panel
Tipped Away From
Body Side
Rear Drawer Support
Is Resting OnTop of
Guide Rail
Rear Drawer Support is
OnTop of Guide Rail
On the High Side
Drawer Front Panel
Tipped to One Side