
Specification Created 6/10 330567
All GE ranges are equipped with 
an Anti-Tip device. The installation 
of this device is an important, 
required step in the installation 
of the range.
*Dimension from the wall to the front of the closed 
door handle is 28-1/4". Depth to the front edge of 
cooktop 25-1/4".
Optional Gas Range Accessory Drip Pans for Sealed and Standard 
Burner Models: 
(Available at additional cost) 
To order these accessory drip pans, call toll-free 800-626-2002.
Gas Self-Clean Range Anti-Tip Bracket 
(Part No. 205C1714P001) 
Electrical Rating: 120V, 60Hz, 15A
Installation Information: Before installing, consult installation 
instructions packed with product for current dimensional data.
24
30" FS Gas Ranges-CL
30
8
4
9
2
2-1/2
Recommended area for
thru the floor connection
of pipe stub and shut-off valve
Recommended area for 
120V outlet on rear wall
and area for thru the wall
connection of pipe stub 
and shut-off valve
46-1/8
26-1/4*
46-3/8
36-1/4±1/4
Installation Information (Dimensions in inches)
Recommended common 
area for gas outlet and 
electrical outlet
 
*Dimension from wall
to front of closed 
door handle is 29".
30
24
30" FS Gas Ranges-CL
30
8
4
9
2
2-1/2
Recommended area for
thru the floor connection
of pipe stub and shut-off valve
Recommended area for 
120V outlet on rear wall
and area for thru the wall
connection of pipe stub 
and shut-off valve
46-1/8
26-1/4*
46-3/8
36-1/4±1/4
Installation Information (Dimensions in inches)
Recommended common 
area for gas outlet and 
electrical outlet
 
*Dimension from wall
to front of closed 
door handle is 29".
30
JGBP25GER 
GE® 30" Free-Standing Gas Range 
For answers to your Monogram,® GE Profile™or 
GE®appliance questions, visit our website at 
ge.com or call GE Answer Center®service, 
800.626.2000.
Dimensions and Installation Information (in inches) 
All 30" GE gas and electric range backguards 
are 30-7/8" wide.*
Note: 30" ranges conform to U.L. requirements 
for 0" spacing from adjacent walls below 
countertops. To reduce possible scorching of 
walls, engineering recommends a minimum of 
1-1/2" spacing to allow for possible extended, 
high heat, no-load heating element operation. 
*Except these models: JGBS07, JGBS04, JGBP90, 
all GE Profile free-standing electric and gas 
ranges 
Fits most countertop backsplash applications. 
Consult Use & Care Manual for detailed 
installation instructions.
30-7/8"