GE PHB925SP1SS User manual

GE Profile Induction Range
Range Models:
PHB925SP1SS
PHB925SP1BB
PHB925SP1WW
Production start FW21
Copyright 2009

Copyright 2009
Warranty

Copyright 2009
Induction Summary
The new Profile Induction freestanding range has:
•Innovative technology – delivers the responsiveness of gas cooking
•Superior performance – Induction technology heats only the pan and its contents
•Remarkable versatility – This induction cooktop offers the choice of 19 different
power levels, including a 3700-watt, 11 inch element for larger cookware (the highest
wattage induction element in the industry with warming capability, and a low-heat
simmer setting for delicate cooking
•Cooler cooktop surface – Since there is not a traditional thermal heating element,
the induction cooktop stays cooler than conventional radiant cooktop
Induction – A “game changing” technology
for cooking with many features valued by
consumers

Copyright 2009
Nomenclature

Copyright 2009
Mini Manual & Model/Serial Tag Location
* Mini-Manual is in an envelope and located inside the control panel

Copyright 2009
NOTE: bAd LinE in display is to signal a
terminal block cord miswire and will
appear if 120VAC is not present between J21-
5(N) and J20-3 (L2). It will also appear if
there is less than 200VAC between J20-1 (L1)
and J20-3 (L2).
bAd LinE
Voltage Monitor

Copyright 2009
Cookware that Works
One layer must be of magnetic, metal material.
Cast Iron
Clad Cookware Lodge Ware –- enameled cast iron
To test cookware - use a magnet if a magnet clings to the base of the cookware
it is induction ready.
Consumer can use a refrigerator magnet to verify.

Copyright 2009
Cooktop Induction Specifications
• (1) 11”- 3700W Induction element
• (2) 7” - 2500W Induction element
• (1) 6” - 1800W Induction element
•(1) 240V 100W Warming element
All Units Have:
3700W
1800W
2500W
2500W 240V 100W

Copyright 2009
Induction Flow Chart
There are four induction cooktop coils.
The controls for the cooktop module
consist of two burner Touch Boards
connected to and working through the
main logic board. The main logic board is
connected via the LINbus serial wire to
the cooktop module, bridge board and the
RPSM. (Relay Power Supply Module)
located on the back of the range.
The bridge board contains the surface on/
hot cooktop indicator lights. The induction
module cooling fan connection is also
located on this board. The bridge board
bridges the Linbus connections from the
filter board, main logic board along with
the RPSM.
A Fifth cooktop element is a resistive
warmer controlled by the RPSM relays.
See wiring diagrams. No relay boards or
line voltages are brought to the control
panel.

Copyright 2009
Induction Module
3700W
<1Ω
1800W
<1Ω
2500W
<1Ω
2500W
<1Ω
Bridge Board
240VAC 100W Warming Element Approx 550Ω
Sensor
11”
6”
7”
7”

Copyright 2009
Element Operation
Right generator board
controls right 2 elements.
Left generator board
controls left 2 elements.

Copyright 2009
Element Operation
Filter board controls both left and right generator boards.

Copyright 2009
Generator Board
Element Connections
Sensor Connections
L1 & L2 from filter
board
LIN Bus from filter
board (need tool to
remove).

Copyright 2009
LIN* Bus Removal Tool
Tool supplied with any part that requires
LIN bus removal.
Keep for future use.
*Local Interconnect Network

Copyright 2009
LIN Bus Removal Tool
Generator Board
Relays
• As viewed from this angle, grab the connector in this manner to avoid potential
damage.

Copyright 2009
Rear Component Layout

Copyright 2009
For the first three minutes after power up, the F-codes will show on the
display.
Main Logic Failure Codes:
The main logic board has error (F) codes that can be utilized by the service
technician. The error codes are not shown on the display when they occur.
They are stored in EEprom and can be retrieved.
Error Codes

Copyright 2009
• F-Codes are not shown on the display when they occur.
• They are stored in eeprom and can be retrieved by pressing:
TIMER ON + CLOCK + START
Error Codes

Copyright 2009
The display then shows F-cd and prompts for an upper or
lower selection. Press 1 for the oven.
Error Codes

Copyright 2009
After selecting 1 for the oven, the log is shown.
Error Codes