Dimensions and Installation Information (in inches) 
For answers to your Monogram,® GE Profile™or 
GE®appliance questions, visit our website at 
geappliances.com or call GE Answer Center®
service, 800.626.2000.
Listed by 
Underwriters 
Laboratories
All GE ranges are equipped with 
an Anti-Tip device. The installation 
of this device is an important, 
required step in the installation 
of the range.
†Note: Check local codes for required breaker size.
Effective January 1, 1996, the National Electrical Code requires that new 
construction (not existing) utilize a 4-conductor connection to an electric range.
Receptacle Locations
Locally approved flexible service cord or conduit must be used because terminals 
are not accessible after range installation. See shaded area in drawing for location 
of electrical outlet box. Recommended outlet locations allow range to be installed 
directly against wall.
Note: 30" ranges conform to U.L. requirements for 0" spacing from adjacent 
walls below countertops. To reduce possibility of scorching walls, engineering 
recommends a minimum of 1-1/2" spacing to allow for possible extended, high-
heat, no-load heating element operation.
Installation Information: Before installing, consult installation instructions 
packed with product for current dimensional data.
KW Rating
240V 12.9
208V 9.7
Breaker Size
40 Amps†
PB905ST 
GE Profile™ 30” Free-Standing Convection Range 
Specification Revised 7/11 221032