OProfi/ePerformanceSeri
JKD910SBSS - GE Profile Performance" 27" Warming Drawer
Warming Drawer Dimensions (in inches) Under Oven Installation (in inches)
Locate
electrical
outlet in
Adjacent
Cabinet
16" From
Left Side \
or 42"
From Right
Side.
24"
Recommended
FromFloor/
ForUnder
Coantertop _
Installation
9
2x4 or 2x2 "_'_,
runners or Solid
Bottom
23-1/2" Min. 23-1/2" Min,
Specification Revised 8/99
10-1/2"
.Install
2x4 or 2x2
Anti-Tip
Block 9"
From Floor
to Bottom
of Block
__ ocate Electrical
Outlet in Adjacent
Cabinet no Further
/ Than 16"From
Left Side or 42"
L_ _ IFrom RightSide,
Above
Toekick _] ___T
or Adjust . _J I
to Oven - >_ I_ 26-3/4"
Installation
Height /.....
Undercounter Installation (in inches)
Electrical Outlet Electrical Outlet 42" Max.
Flush with Side From Right Side.
of Cabinet, f_, 1-1/2" Cabinet Top
Electrical 7" Ma)c J_
Outlet 16" Max. "_
From Left Side. _-'_+_ __
< 36"
1 "'_-J:_" Countertop
_ - Height
OptionalAccessories:
JXPNl-Optional PanSetAccessoryfor
WarmingDrawer.
Fivecommercialpanswith lids(4"deep)
Onelargepan(14quarts)
Two pans(6quartseach)
medium
Twosmallpans(3quartseach)
ZXD27B-1/4" woodpaneltrim kit
Important Installation Note:
Mustprovideanti-tipbraceat thebackof
thecabinetandthetopof thecutout.
Note:Wheninstallingwarmingdrawer
with acooktop,allowa 2" minimum
fromcooktopburnerboxbottomto top
of cut-out.
ForanswerstoyourMonogram,_
GEProfilePerformanceSeries:'
GEProfile or GEappliance questions, call
GEAnswerCenter'service,800.626.2000.
(_ isted by
Underwriters
La_oratodes
