GE GTWN5050MWS Manual

For answers to your Monogram,® GE Profile™or
GE®appliance questions, visit our website at
ge.com or call GE Answer Center®service,
800.626.2000.
Listed by
Underwriters
Laboratories
GTWN5050M
GE®4.3 IEC cu. ft. stainless steel capacity washer
Specification Revised 1/11 360195
Circuit Requirements: An individual, properly-grounded branch
circuit, with a three-prong grounding-type receptacle, protected
by a 15 or 20 amp circuit breaker or a time-delay fuse, is required.
Electrical Rating: 120V, 60Hz, 10A
Note: Washer wall outlet must be located within 36" of service
code entry. Wall outlet must not be located behind dryer.
Installation Information: Before installing, consult installation
instructions packed with product for current dimensional data.
Dimensions and Installation Information (in inches)
36
25-1/2
42
51
Side View
27
Rear View

Features and Benefits
• ENERGY STAR®qualified and CEE Tier II rated - Meets or exceeds federal
guidelines for energy efficiency for year-round energy and money savings
• HydroWave wash system with HE LoWater wash and Infusor™- Utilizes the
concentrated power of HE detergent, requiring less water than a traditional
topload washer to get clothes clean
• PreciseFill - Washer will automatically measure the load size and add just the
right amount of water
• 5 wash/spin speed combinations - Washer alternates speeds for great
clothes care
• 700 RPM Spin Speed - Fast spin speeds remove water efficiently and minimize
dry time
• Rotary electronic controls with cycle status lights - Make it easy to select and
monitor wash cycles
• 6 wash/rinse temperatures - Multiple settings offer a greater degree of control
over fabric cleaning and care
• Prewash Cycle - Allows clothing additional time to soak and agitate to help
remove stubborn stains
• Model GTWN5050MWW – White with silver backsplash
GTWN5050MWS
Modified Energy Factor (MEF) 2.20
Water Factor (WF) 4.50
GTWN5050M
GE®4.3 IEC cu. ft. stainless steel capacity washer
Specification Revised 1/11 360195