GE Peristaltic Pump P-1 User manual

Peristaltic Pump P-1
Operating Instructions
Original instructions

Table of Contents
31 Introduction ..........................................................................................................
41.1 About this manual ................................................................................................................................
51.2 Important user information .............................................................................................................
71.3 Regulatory information ......................................................................................................................
81.3.1 EU Directives ....................................................................................................................................
91.3.2 Eurasian Customs Union ............................................................................................................
101.3.3 Regulations for USA and Canada ...........................................................................................
121.3.4 Korean regulatory information ................................................................................................
131.3.5 Other regulations and standards ............................................................................................
151.4 Associated documentation ..............................................................................................................
172 Safety instructions ...............................................................................................
182.1 Safety precautions ...............................................................................................................................
232.2 Labels .........................................................................................................................................................
262.3 Emergency procedures ......................................................................................................................
272.4 Recycling information .........................................................................................................................
292.5 Declaration of Hazardous Substances (DoHS) ........................................................................
313 Instrument description .......................................................................................
354 Installation ............................................................................................................
364.1 Site requirements ..................................................................................................................................
374.2 Transport ..................................................................................................................................................
384.3 Unpack the product .............................................................................................................................
394.4 Assemble the product ........................................................................................................................
424.5 Connections ............................................................................................................................................
445 Operation ..............................................................................................................
455.1 Set the flow rate ....................................................................................................................................
465.2 Start and stop the pump ...................................................................................................................
475.3 Connections to the remote control socket ...............................................................................
485.4 Calibration of volume information ................................................................................................
496 Maintenance .........................................................................................................
527 Reference information ........................................................................................
537.1 Specifications .........................................................................................................................................
547.2 Ordering information ..........................................................................................................................
557.3 Health and Safety Declaration Forms .........................................................................................
2 Peristaltic Pump P-1 Operating Instructions 28962201 AF
Table of Contents

1 Introduction
About this chapter
This chapter contains important user information, descriptions of safety notices, regula-
tory information, intended use of the Peristaltic Pump P-1 instrument, and lists of asso-
ciated documentation.
In this chapter
See pageSection
41.1 About this manual
51.2 Important user information
71.3 Regulatory information
151.4 Associated documentation
Peristaltic Pump P-1 Operating Instructions 28962201 AF 3
1 Introduction

1.1 About this manual
Purpose of this manual
The Operating Instructions provide you with the information needed to install, operate
and maintain the product in a safe way.
Scope of this manual
The Operating Instructions cover the Peristaltic Pump P-1 instrument.
Typographical conventions
Software items are identified in the text by bold italic text. A colon separates menu levels,
thus File:Open refers to the Open command in the File menu.
Hardware items are identified in the text by bold text (for example, Power).
4 Peristaltic Pump P-1 Operating Instructions 28962201 AF
1 Introduction
1.1 About this manual

1.2 Important user information
Read this before operating the
product
All users must read the entire Operating Instructions before installing, operating or
maintaining the product.
Always keep the Operating Instructions at hand when operating the product.
Do not operate the product in any other way than described in the user documentation.
If you do, you may be exposed to hazards that can lead to personal injury and you may
cause damage to the equipment.
Intended use of the product
Peristaltic Pump P-1 is a single channel laboratory pump for use in liquid chromatography
and other applications where accurately controlled liquid flows are required.
Peristaltic Pump P-1 is intended for research use only, and shall not be used in any clin-
ical procedures, or for diagnostic purposes.
Prerequisites
In order to operate Peristaltic Pump P-1 in the way it is intended:
•The user must have a general understanding of how a PC and the Microsoft®
Windows®operating system works (if a computer is used).
•The user must understand the concepts of liquid chromatography.
•The user must read and understand the Safety instructions chapter in the Operating
Instructions.
•Peristaltic Pump P-1 and software must be installed, configured and calibrated ac-
cording to the Operating Instructions.
Peristaltic Pump P-1 Operating Instructions 28962201 AF 5
1 Introduction
1.2 Important user information

Safety notices
This user documentation contains safety notices (WARNING, CAUTION, and NOTICE)
concerning the safe use of the product. See definitions below.
WARNING
WARNING indicates a hazardous situation which, if not avoided,
could result in death or serious injury. It is important not to proceed
until all stated conditions are met and clearly understood.
CAUTION
CAUTION indicates a hazardous situation which, if not avoided,
could result in minor or moderate injury. It is important not to pro-
ceed until all stated conditions are met and clearly understood.
NOTICE
NOTICE indicates instructions that must be followed to avoid
damage to the product or other equipment.
Notes and tips
A note is used to indicate information that is important for trouble-free and
optimal use of the product.
Note:
A tip contains useful information that can improve or optimize your procedures.
Tip:
6 Peristaltic Pump P-1 Operating Instructions 28962201 AF
1 Introduction
1.2 Important user information

1.3 Regulatory information
Introduction
This section lists the regulations and standards that apply to the Peristaltic Pump P-1
instrument.
Manufacturing information
The table below summarizes the required manufacturing information.
InformationRequirement
GE Healthcare Bio-Sciences AB,Name and address of manufacturer
Björkgatan 30, SE 751 84 Uppsala, Sweden
In this section
See pageSection
81.3.1 EU Directives
91.3.2 Eurasian Customs Union
101.3.3 Regulations for USA and Canada
121.3.4 Korean regulatory information
131.3.5 Other regulations and standards
Peristaltic Pump P-1 Operating Instructions 28962201 AF 7
1 Introduction
1.3 Regulatory information

1.3.1 EU Directives
Introduction
This section describes the EU Directives that apply to the Peristaltic Pump P-1 instrument.
Conformity with EU Directives
This product fulfills the European Directives listed below. See the EU Declaration of
Conformity for the directives and regulations that apply for the CE marking.
If not included with the product, a copy of the EU Declaration of Conformity is available
on request.
TitleDirective
Machinery Directive (MD)2006/42/EC
Electromagnetic Compatibility (EMC) Directive2014/30/EU
Low Voltage Directive (LVD)2014/35/EU
Restriction of Hazardous Substances (RoHS) Directive2011/65/EU
CE marking
The CE marking and the corresponding EU Declaration of Conformity is valid for the in-
strument when it is:
•used according to the Operating Instructions or user manuals, and
•used in the same state as it was delivered from GE, except for alterations described
in the Operating Instructions or user manuals.
8 Peristaltic Pump P-1 Operating Instructions 28962201 AF
1 Introduction
1.3 Regulatory information
1.3.1 EU Directives

1.3.2 Eurasian Customs Union
Introduction
This section contains additional regulatory information to comply with the Eurasian
Customs Union technical regulations.
Manufacturer and importer
information
The table below summarizes the manufacturer and importer information required by
the Eurasian Customs Union.
InformationRequirement
See Manufacturing information, on page 7Name and address of manufacturer
Telephone: + 46 771 400 600Telephone number of manufacturer
GE Healthcare LLCImporter and/or company for obtain-
ing information about importer GE Healthcare Life Sciences
Presnenskaya nab., 10C, 12th floor
RU-123 317 Moscow, Russian Federation
Telephone 1: + 7 495 411 9714
Fax nr: + 7 495 739 6932
Email: [email protected]
Peristaltic Pump P-1 Operating Instructions 28962201 AF 9
1 Introduction
1.3 Regulatory information
1.3.2 Eurasian Customs Union

1.3.3 Regulations for USA and Canada
Introduction
This section describes the regulations that apply to the Peristaltic Pump P-1 instrument
in the USA and Canada.
NRTL certification
This symbol indicates that the product has been certified by Intertek, which is a US Oc-
cupational Safety and Health Administration Nationally Recognized Testing Laboratory
(NRTL).
FCC compliance
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
The user is cautioned that any changes or modifications not expressly approved
by GE could void the user’s authority to operate the equipment.
Note:
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide rea-
sonable protection against harmful interference in a residential installation. This equip-
ment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
10 Peristaltic Pump P-1 Operating Instructions 28962201 AF
1 Introduction
1.3 Regulatory information
1.3.3 Regulations for USA and Canada

•Consult the dealer or an experienced radio/TV technician for help.
CAN ICES/NMB compliance
This product complies with the Canadian standard ICES-001/NMB-001 concerning
electromagnetic compatibility.
Peristaltic Pump P-1 Operating Instructions 28962201 AF 11
1 Introduction
1.3 Regulatory information
1.3.3 Regulations for USA and Canada

1.3.4 Korean regulatory information
NOTICE
Class A equipment (equipment for business use).
This equipment has been evaluated for its suitability for use in a
business environment.
When used in a residential environment, there is a concern of radio
interference.
주의사항
A급 기기 (업무용 방송통신 기자재)
이 기기는 업무용환경에서 사용할 목적으로 적합성평가를 받은
기기
로서 가정용 환경에서 사용하는 경우 전파간섭의 우려가 있습니
다.
12 Peristaltic Pump P-1 Operating Instructions 28962201 AF
1 Introduction
1.3 Regulatory information
1.3.4 Korean regulatory information

1.3.5 Other regulations and standards
Introduction
This section describes the standards that apply to the Peristaltic Pump P-1 instrument.
Environmental conformity
This product conforms to the following environmental requirements.
TitleRequirement
Waste Electrical and Electronic Equipment (WEEE) Directive2012/19/EU
Management Methods for the Restriction of the Use of Haz-
ardous Substances in Electrical and Electronic Products.
China RoHS
Standards, applied to this
product
Standard requirements fulfilled by this product are summarized in the table below.
DescriptionStandard
Safety of machinery. General principles for design. Risk
assessment and risk reduction.
EN ISO 12100
Safety requirements for electrical equipment for mea-
surement, control, and laboratory use - Part 1: General
requirements.
IEC/EN 61010-1, UL
61010-1, CAN/CSA-C22.2
No. 61010-1
Electrical Equipment for Measurement, Control, and
Laboratory Use-EMC requirements-Part 1: General re-
quirements
IEC/EN 61326-1
Emission according to CISPR 11, Group 1, class A
Industrial, Scientific and Medical (ISM) Radio Frequency
Generators (Canada)
ICES-001/NMB-001
Technical documentation for the assessment of electrical
and electronic products with respect to the restriction
of hazardous substances
EN 50581
Peristaltic Pump P-1 Operating Instructions 28962201 AF 13
1 Introduction
1.3 Regulatory information
1.3.5 Other regulations and standards

NOTICE
This equipment is not intended for use in residential environments
and may not provide adequate protection to radio reception in
such environments.
14 Peristaltic Pump P-1 Operating Instructions 28962201 AF
1 Introduction
1.3 Regulatory information
1.3.5 Other regulations and standards

1.4 Associated documentation
Introduction
This section describes the user documentation that is delivered with the product, and
how to find related literature that can be downloaded or ordered from GE.
System-specific documentation
In addition to the Operating Instructions manual, the documentation package supplied
with Peristaltic Pump P-1 also includes one or more product documentation binders
containing detailed specifications and traceability documents.
The most important documents in the documentation package, with regard to technical
aspects of Peristaltic Pump P-1, are listed in the table below.
Main contentsDocumentation
Instructions needed to install, operate
and maintain Peristaltic Pump P-1 in a
safe way.
Peristaltic Pump P-1 Operating Instruc-
tions
Detailed system description and compre-
hensive user instructions.
Peristaltic Pump P-1 User Manual
Declaration of Conformity for EU and/or
other regions.
Declaration of Conformity
Data files, application notes and
user documentation on the web
To order or download data files, application notes or user documentation, see the instruc-
tion below.
ActionStep
Go to www.gelifesciences.com/products.1
Click Chromatography products.2
Click Tools and accessories.3
Click Pumps.4
Click Peristaltic Pump P-1.5
Peristaltic Pump P-1 Operating Instructions 28962201 AF 15
1 Introduction
1.4 Associated documentation

ActionStep
Click RELATED DOCUMENTS.6
Select to download the chosen literature.7
16 Peristaltic Pump P-1 Operating Instructions 28962201 AF
1 Introduction
1.4 Associated documentation

2 Safety instructions
About this chapter
This chapter describes safety precautions, labels and symbols that are attached to the
equipment. In addition, the chapter describes emergency and recovery procedures, and
provides recycling information.
Important
WARNING
Before installing, operating or maintaining the product, all users
must read and understand the entire contents of this chapter
to become aware of the hazards involved.
In this chapter
See pageSection
182.1 Safety precautions
232.2 Labels
262.3 Emergency procedures
272.4 Recycling information
292.5 Declaration of Hazardous Substances (DoHS)
Peristaltic Pump P-1 Operating Instructions 28962201 AF 17
2 Safety instructions

2.1 Safety precautions
Introduction
Peristaltic Pump P-1 is powered by mains voltage and handles materials that can be
hazardous. Before installing, operating or maintaining the system, you must be aware
of the hazards described in this manual.
Follow the instructions to avoid injury to the operator or other personnel, damage
to samples or other substances handled by the equipment, to the product, or to
other equipment in the area.
The safety precautions in this section are grouped into the following categories:
•General precautions
•Personal protection
•Installing and moving the product
•Power supply
•Maintenance
General precautions
WARNING
Do not operate the product in any other way than described in the
user documentation.
WARNING
Only properly trained personnel may operate and maintain the
product.
WARNING
Do not use any accessories not supplied or recommended by GE.
18 Peristaltic Pump P-1 Operating Instructions 28962201 AF
2 Safety instructions
2.1 Safety precautions

WARNING
Do not use Peristaltic Pump P-1 if it is not working properly, or if it
has suffered any damage, for example:
•damage to the power cord or its plug
•damage caused by dropping the equipment
•damage caused by splashing liquid onto it
CAUTION
Waste tubes and containers must be secured and sealed to prevent
accidental spillage.
CAUTION
Make sure that the waste container is dimensioned for maximum
possible volume when the equipment is left unattended.
NOTICE
Avoid condensation by letting the unit equilibrate to ambient tem-
perature.
NOTICE
Organic solvents may not be used with Peristaltic Pump P-1.
Personal protection
WARNING
Always use appropriate Personal Protective Equipment (PPE) during
operation and maintenance of this product.
Peristaltic Pump P-1 Operating Instructions 28962201 AF 19
2 Safety instructions
2.1 Safety precautions

WARNING
Hazardous substances and biological agents. When using haz-
ardous chemical and biological agents, take all suitable protective
measures, such as wearing protective clothing, glasses and gloves
resistant to the substances used. Follow local and/or national
regulations for safe operation and maintenance of this product.
WARNING
Spread of biological agents. The operator must take all necessary
actions to avoid spreading hazardous biological agents. The facility
must comply with the national code of practice for biosafety.
Installing and moving the
product
WARNING
Supply voltage. Before connecting the power cord, make sure that
the supply voltage at the wall outlet corresponds to the marking
on the instrument.
WARNING
Protective ground. The product must always be connected to a
grounded power outlet.
WARNING
Power cord. Only use power cords with approved plugs delivered
or approved by GE.
WARNING
Access to power cord. Do not block access to the power cord. The
power cord must always be easy to disconnect.
20 Peristaltic Pump P-1 Operating Instructions 28962201 AF
2 Safety instructions
2.1 Safety precautions