Gecko GG750030 User manual

Thank you for purchasing another quality Gecko product.
Introducing Gecko Glass, iPad Pro 10.5” screen protector.
At Gecko we believe in delivering products that enhance the exceptional
beauty and functionality of the iPad Pro 10.5”. Designed in Australia,
used everywhere, the Gecko glass is a tempered glass screen protector.
With a 9H hardness rating, premium coating & scratch resistant surface,
the Gecko glass is a screen protector created for easy installation and
maximum surface protection. With its exact measurements, it has been
designed to ensure a perfect fit for your iPad Pro 10.5” screen. All Gecko
products reflect the attention to detail and hard work of our world class
development and design team. We are committed to the pursuit of
excellence in making sure we deliver the highest quality products to
enhance your digital lifestyle.
Please enjoy.
Yours sincerely
Gecko Team
WARRANTY INFORMATION - FOR AUSTRALIAN CONSUMERS ONLY
Powermove Distribution provides its accessory range of products with a 1
Year back to base warranty:“Our goods come with guarantees that cannot be
excluded under the Australian Consumer Law. You are entitled to a replacement
or refund for a major failure and for compensation for any other reasonably
foreseeable loss or damage. You are also entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the failure does
not amount to a major failure”.
The warranty offered is in addition to other rights and remedies offered under
consumer law.
The conditions contained in this warranty apply to purchases made within
Australia only.
Purchases made outside of Australia are covered by the warranty procedures
and policies that comply with each respective place of purchase.
Conditions of warranty:
a. The consumer must retain proof of purchase for the warranty period.
b. The warranty period is valid for 1-year from the original purchase date.
c. The warranty applies only to defects in material or workmanship that occur
during normal use of the product.
d. The warranty is a ‘back-to-base’ warranty meaning the consumer is
responsible for the costs associated with returning the product to their place
of purchase or to Powermove Distribution.
e. The consumer must return the goods, original packaging (where feasible)
and proof of purchase to make a warranty claim.
f. If a replacement product is supplied the warranty period applies to the
balance of the warranty period from the original purchase date.
The warranty does not cover:
a. Failure that has occurred as a result of accident, abuse or mis-treatment.
b. Goods that are damaged as a result of other third party products.
c. Any misrepresentations given that are not covered by the warranty.
Warranty claim procedure:
a. The consumer must return the goods as per the requirements stated
in ‘conditions of warranty’ section d & e.
b. If the consumer is unable to return the goods to the place of purchase they
can send the goods with the required packaging and documentation, along
with their contact details including address, phone number and e-mail to:
Warranty Department
Powermove Distribution
28 The Gateway
Broadmeadows, Vic 3047
Ph: 03 9358 5999 Fax: [phone]
E-Mail: [e-mail]
Gecko Glass - iPad Pro 10.5”
Fitting Instructions
Included in this pack:
Tempered glass guard/s
Microfibre cloth
Gecko clearscreen
Applicator card
Gecko clearscreen sachet: The Gecko clearscreen sachet is non-toxic,
anti-static, alcohol free, non-streaking, non-solvent, and non-flammable.
Safety precautions: Wash hands after use. If the Gecko clearscreen comes in
contact with your eyes, flush eyes with large amounts of water for at least
15 minutes.
Note: Gecko clearscreen sachet does not remove scratches, but may help
diminish their appearance.

step
1
Tear open supplied Gecko clearscreen sachet. Gently massage your
clearscreen wipe over the screen surface, ensuring not to go into holes or
openings. Once cleaned, polish the screen using the Gecko microfibre cloth,
until your screen is crystal clear. Note: For best results screen should be
free of dust or hair before the guard installation.
Gecko tempered glass guard is protected on one side by a clear masking
film, labelled as 'tab A'. Once your screen is clear of dust or hairs, peel
back the masking film from the tempered glass guard using green 'tab A',
exposing the adhesive edges of the guard. The little green 'tab A' is not to
be removed - it is adhered to the masking film and is used only as a pull
tab. Avoid touching the adhesive edges of the guard, and discard the
masking film with the green 'tab A' on it.
Carefully position the guard starting at the base of the iPad mini screen,
ensuring it is aligned at the bottom and sides of the screen and centred
around the home button. Once it is aligned correctly, carefully lower the
guard onto the iPad mini screen from the bottom upwards. Work your way
to the top of the iPad mini screen using the soft cloth to rub the guard onto
the iPad mini, carefully checking the alignment down the sides of the iPad
mini as you apply the guard. If any imperfections do occur, smooth them
carefully with the soft cloth supplied.
step
2
step
3
Remove
Tab “A”
masking film
If you are not happy with the alignment, adjust the position by very gently
& carefully peeling back the gecko glass guard from any corner. Repeat step
2 until you are happy with the alignment.
IMPORTANT: Do not bend the guard as it may cause it to shatter.
step
4
DO NOT BEND