
Handling precautions
■This product has a special treatment on the screen surface to enhance the projection effect.
Note the following points and handle them carefully, as dirt and scratches may damage the
projection effect.
●Do not touch the screen surface.
●Do not draw characters or pictures on the screen surface.
●Do not rub or scratch the screen with a hard object.
●For maintenance the screen, refer to the included manual "Screen materials".
■The screen smells when you start using it. Ventilate the room enough by opening
windows. Ventilation lessens the odor gradually.
■Keep sharp blades or sharp metal objects away from the screen.
●Not only it impairs the projection effect, but it causes damage.
Installation precaution
■To ensure the performance of the projection screen and prevent troubles, do not
install it in the following locations.
・Places where vibration or shock may occur.
・Places near sources of magnetism, heat, steam, oily smoke, etc.
・Places where hit the wind from heating equipment.
■Install according to the structure and material of the installation area.
■Use a soft blanket or cloth to prevent the product or floor from being scratched during
installation work.
■Be careful not to lose tighten or over tighten the screws.
■When installing, pay sufficient attention to ensure the safety for surrounding.
■When working at high places, ensure the safety of your scaffolding and wear protective
equipment properly before starting work.
■Install the product as horizontally as possible.
■We are not responsible for any accidents or damages caused by
improper handling or natural disasters.
●The installation surface of this machine must be strong enough
to support the screen mass for a long time.
If the installation surface is not strong enough, the machine
may fall off.
●Be sure to perform installation work with two or more workers.