Geeklink RemoteBox 3S User manual

GeekLink 3S
Quick Installation Guide
Created by Gotake
Hardware Installation
Connect 3S to router with network cable, and power adapter (included).
APP Installation
Scan QR code on packing box to download APP. (Note: Please scan QR code
through UC Brower or other QR scanning tools)
Or you can download APP from www.geeklink.com.cn/server with mobile browser.
When mobile phones and 3S connect to the same WiFi network, mobile phone can
control electric appliances (the LED becomes green).
- Green LED means local area connection;
- Yellow LED means remote connection;
- Red LED means no connection.

Add New Remote Control
Click “+” on the left sidebar and then choose “Create RC” (Note: slide the UI to choose
sidebar)
Set Name, Type of electric appliances that need controlled remotely, and click “✓”on
the top right corner.
Learn Remote Control Keys
Press the key that need to learn from remote controller and confirm it again when
prompted (Note: all learnt keys can be newly learnt).
It can replace remote controller to control electric appliances after learning.

Custom Remote Control
Click “Edit” on the right sidebar and then click “+”. Control list will pop up at the bottom
of the screen.
Choose the function you like and drag it into control panel.
Drag arrow on the lower right corner of button to resize it.
Smart Scene
On the left sidebar and choose “Scene” and click “+”, then choose “Create Scene”.
Set name of scene. Click “✓”on the top right corner to continue.
Click Add Action. Then: ①Enter the name of action; ②Enter delay time; ③Choose
the device that is responsible for the action; ④Choose control code which support call,
IR learning and RF learning. Click “✓”on the top right corner to save it.

Timing Offline
Click “Timing Offline” on the right sidebar to enter timing management page.
Click “Add Timing” to enter setting page. You can set name, time and action of timing.
Please visit our ebay store for more selection:
http://stores.ebay.com/Gotake-IP-Camera
Thank You!