Gefen AUD-144 User manual

1x4 AUDIO DA
USER MANUAL
www.gefen.com

Technical Support:
Telephone [phone]
[phone]
Fax [phone]
Technical Support Hours:
8:00 AM to 5:00 PM Monday through Friday PST
Write To:
Gefen Inc.
C/O Customer Service
20600 Nordhoff St.
Chatsworth, CA 91311
www.gefen.com
[email protected]
Notice
Gefen Inc. reserves the right to make changes in the hardware, packaging and any
accompanying documentation without prior written notice.
The 1x4 Audio DA is a trademark of Gefen Inc.
Macintosh is a trademark of Apple Computer Inc.
© 2007 Gefen Inc., All Rights Reserved
ASKING FOR ASSISTANCE

TABLE OF CONTENTS
Introduction
Box Contents
How it works
Operation Notes
1x4 Audio DA Front Panel Layout
1x4 Audio DA Back Panel Functions
Link Cable - Wiring Diagram
System Specifications
Warranty
1
2
3
4
5
6
7
8
9

Thank you for purchasing the new ex•tend•it 1x4 Audio DA series.
The ex•tend•it 1x4 Audio Distribution DA allows 8 audio locations from the same audio
source. The 1x4Audio Distribution DAalso extends the distributed audio to 4 locations up
to a 1000 feet away with CAT5.
INTRODUCTION
1

The 1x4 Audio DA system consists of:
(1) 1x4 Audio DA
(1) 5 VDC power supply
(1) Audio cable (6 FT)
(1) User Manual
BOX CONTENTS
2

HOW IT WORKS
3
The ex•tend•it 1x4 Audio Distribution unit sits next to your audio source. Stereo cables
supplied with the 1x4 Audio Distribution package connects your audio source to the
1x4 Audio Distribution sender. TheAudio Extender receiver unit connects to your
speakers or audio output device. One CAT-5 cable per channel connects the 1x4 Audio
Distribution unit and the Audio Extender receive unit to each of the distributed locations
- up to 1000 feet away.
1X4 Audio DA
1X4 Audio DA

READ THESE NOTES BEFORE INSTALLING
OR OPERATING THE 1X4 AUDIO DA SYSTEM
* Industry standard Category-5 (CAT-5) cables are used to link the 1x4 Audio DA and
receiver boxes together.
* The 1x4 Audio DA units are housed in a metal box for better RF shielding.
OPERATION NOTES
4

Front Panel Function Descriptions
+5V - Connects to 5VDC power supply
AUDIO IN - Indicates that the unit is plugged in and powered on
POWER ON INDICATOR - Indicates that the unit is plugged in and powered on
1x4 AUDIO DA FRONT PANEL LAYOUT
5
1
1
2
3
2 3

POWER - 5 VDC external power supply
AUDIO - Audio mini Jack input from source
Audio Out - RJ-45 connector connects to Audio Extender Receiver units.
1x4 AUDIO DA BACK PANEL FUNCTIONS
6
1
2
3
3

LINK CABLE - WIRING DIAGRAM
7
White/Orange
Orange
White/Green
Blue
White/Blue
Green
White/Brown
Brown
RJ-45 Jack RJ-45 Jack
2 3 4 5
6
7 8 1
2 3 4 5
6
7 8 1
1818

Sample Rate .......................................................................... 5 kHz (min) - 48 kHz (max)
Frequency Response .................................................................................. 20hz - 20khz
Interfaces ...................... 1 x audio - line-out/headphones - mini-phone stereo 3.5 mm - 1
Dimensions ........................................................................................ 1”H x 4”W x 3.75”D
Weight ....................................................................................................................... 3 lbs
SPECIFICATIONS
8

Gefen Inc. warrants the equipment it manufactures to be free from defects in material
and workmanship.
If equipment fails because of such defects and Gefen Inc. is notified within two
(2) year from the date of shipment, Gefen Inc. will, at its option, repair or replace
the equipment, provided that the equipment has not been subjected to mechanical,
electrical, or other abuse or modifications.
Equipment that fails under conditions other than those covered will be repaired at the
current price of parts and labor in effect at the time of repair. Such repairs are warranted
for ninety (90) days from the day of reshipment to the Buyer.
This warranty is in lieu of all other warranties expressed or implied, including without
limitation, any implied warranty or merchantability or fitness for any particular purpose,
all of which are expressly disclaimed.
1. Proof of sale may be required in order to claim warranty.
2. Customers outside the US are responsible for shipping charges to and from Gefen.
3. Copper cables are limited to a 30 day warranty and cable must be free from any
scratches, markings, and neatly coiled.
The information in this manual has been carefully checked and is believed to be
accurate. However, Gefen Inc. assumes no responsibility for any inaccuracies that may
be contained in this manual. In no event will Gefen Inc., be liable for direct, indirect,
special, incidental, or consequential damages resulting from any defect or omission
in this manual, even if advised of the possibility of such damages. The technical
information contained herein regarding 1x4 Audio DA features and specifications is
subject to change without notice.
WARRANTY
9