
2
DE
EN
FR
Connection of the setting switch
H Only the setting switch M56F155 may be used for setting the RESCUEline. The setting
switch M56F155 works with potential-free contacts.
H The work with the service terminals may be accomplished only by an
electrical specialist.
I Information: The programming key corresponds to the simultaneous operation of the
UP and DOWN keys.
Connection of the setting switch
GEIGER motors GJ5606 AE10. RESCUEline
I Note: please refer to the installation and operating instructions
of GJ5606 AE10. RESCUEline to adjust the end positions.
H Do not connect plug connectors that are used for 230V to the connection for the
operating or setting switch.
If 230V is connected incorrectly to 12V connections, the device will be destroyed
and all 12V circuits will be put under mains voltage. Incorrect connection can lead to
death and serious injuries due to electric shock.
blue
black
brownbrown DOWN
UP
12 V
blue
black
Control Motor
PROG
M
Subject to technical modifications | 100W2524 en V000 0519
For technical questions, please call our service team at: +49 (0) 7142 938 333.
They will be happy to assist you.
Gerhard Geiger GmbH & Co. KG
Schleifmühle 6 | D-74321 Bietigheim-Bissingen
T +49 (0) 7142 9380 | F +49 (0) 7142 938 230
info@geiger.de | www.geiger.de