GEJST DAIKU User manual

gejst.com
DAIKU
By Gejst Design Team
Instruction for 50x70

gejst.com
Content of the box
The box contains
2
x4 x6
x2
x2 x2
x2 x2 x2 x2
x8x8

gejst.com
Start by opening up your
box and lay out all the dierent
parts on a blanket
Connect the short and long beams
in the notches. Screw them together
and place the small rubber sticker
on top of the screw
Place the poster on the glass.
Place rubber dots without glue
in the corners of the poster,
to make sure that it will stay in place.
Place the last glass on top
3
1
2
3

gejst.com
Place the glass in the frame
Place the the small rubber
stickers on the brackets and
attach them so the dots are
facing downwards on the glass
Make markings on the walls
according to the drawing.
Drill a 6 mm hole in each of the markings
4
4
5
640,4 cm

gejst.com
Insert rawlplugs in the holes
Fasten the screw 7 mm
from the wall
Place the frame on top of the
screws and slide it downwards
into place
5
7
8
9
7 mm