Gen2wave RP1000 Instruction manual
1
RP1000
QUICK START MANUAL
#327C, Sigma2, Gumi-dong, Bundang-gu, Seongnam-si, Gyeonggi-do, 463-741, Rep. of Korea
Tel. +82-31-607-7537 Fax. +82-31-608-7537 Email :Tech@gen2wave.com
2
Revision History
Changes to the original manual are listed below:
Version Date Description
Rev 1.0 10/08/9 Initial release
Rev 2.1 10/10/28 Buttons and Parts
Rev 2.2 10/11/02 Design Changing
3
BUTTONS AND PARTS
1: Phone Speaker
2: Scan Button
3: Volume Up/Down Button
4: Scan Button
5: Microphone
6: Reset Button
7: I/O Connector
8: Power Button
9: Charging/Battery Status LED
10: Touch Screen
11: Start Menu
12: Soft Key
1
14
7
6
5
13
1
3
2
4
11
8
15
12
16
9
10
12
13: Talk
14: Navigation
15: End
16: Enter/OK Key
4
INSERT THE BATTERY
★ NOTE The RP1000 ships with either a 1860mAh or 3600mAh battery.
The 1860mAh battery is shown below.
To insert the battery.
1. Insert the battery top first into the battery compartment.
2. Press the battery down into the battery compartment.
3. Lock the Battery Release Latch.
To remove the battery.
1. Unlock the Battery Release Latch.
2. Lift off the down side of battery.
Battery Release Latch
5
Charging the RP1000 Battery
Connect the cradle to power. Insert the RP1000 into the RP1000 slot to begin charging.
Before using the RP1000 for the first time, charge the main battery
until fully charged.
CHARGING THE SPARE BATTERY
Charging/Battery
Status LED
6
1. Insert the battery top first into the spare battery charging compartment.
2. Press and hold the battery bottom.
3. Lock the spare battery release latch.
Insert the SIM Card
To insert the SIM card:
1. Slide up the SIM card holder door up to unlock.
2. Lift the SIM card holder door.
3. Insert the SIM card.
4. Close SIM card holder door and slide down up to lock into place
5. Insert the battery.
1.Unlock
2. Lift
7
INSERT MICROSD CARD
To insert the microSD card:
1. Slide up the microSD card holder door up to Open.
2. Lift microSD card holder door.
3. Insert the microSD.
4. Close microSD card holder door and slide down to lock into place.
5. Insert the battery.
1.Open
2. Lift
microSD card holder
door
8
SYNCHRONIZE THE RP1000 WITH YOUR WINDOWS PC
ActiveSync is a free application available from the Microsoft web site at
www.windowsmobile.com/ge
tstarted. Followed instructions.
Table of contents
