Genelec AD9200A User manual

Genelec AD9200A
Analog to Digital Converter
AD9200A
Contemporary audio production facilities are in
transition from analog to digital with Genelec DSP
monitoring systems on the forefront. While console
technology advances, monitor paths have remained
largely analog, with only a few manufacturers offer-
ing digital audio monitoring output. Environments
with such digital capabilities integrate seamlessly
with our DSP Systems.
In response to those customers who wish to inter-
face conventional analog monitoring sections to
Genelec DSP and SE™ DSP systems, Genelec
proudly announces the AD9200A eight-channel
analog to digital converter.
Eight-channel balanced analog input is delivered
via a 25-pin DB25 connector wired to the Tascam
/ProTools industry standard pinout. Digital output
consists of four XLR connections, each carrying
two channels of AES/EBU audio. The AD9200A
converter outputs AES3 format with 24 bit word
length and 192 kHz sample rate, providing the
same consistent high quality found on our 8200
DSP products.

Genelec Document BBA0083001. Copyright Genelec Oy 11.2007. All data subject to change without prior notice
International enquiries:
Genelec, Olvitie 5
FIN-74100, Iisalmi, Finland
Phone [phone]
Fax [phone]
Email [email protected]
In the U.S. please contact:
Genelec, Inc., 7 Tech Circle
Natick, MA 01760, U.S.A.
Phone [phone]
Fax [phone]
Email [email protected]
www.genelec.com
In Sweden please contact:
Genelec Sverige
Box 5521, S-141 05 Huddinge
Phone [phone]
Fax [phone]
Email [email protected]
In China please contact:
Beijing Genelec Audio Co. Ltd.
Jianwai SOHO, Tower 12, Room 2306
39 East 3rd Ring Road
Chaoyang District, Beijing 100022, China
Phone [phone]
Fax [phone]
AD9200A Data Sheet
Parameter Value Note
Balanced analog input 8 channel DB25, Tascam pin-out
Digital audio format 24 bits, AES/EBU (AES3)
Dynamic range 110 dB (lin)
THD+N 0.018% +20 dBu input, 22 Hz – 20 kHz
Input clip level +21.5 dBu
Response flatness ±0.025 dB typ 22 Hz – 20 kHz
Frequency range 4 Hz – 76 kHz - 3dB relative to 1 kHz
Gain difference between any two channels ±0.02 dB typ 22 Hz – 20 kHz
AES/EBU output XLR female four connectors
Sampling frequency 192 kHz
External power supply type FW74010/12
Mains voltage 100 – 240 VAC, 50 – 60 Hz
Supply voltage 12 VDC centre pin has positive polarity
Power consumption < 7 W incl. external power supply
Dimensions (H x W x D) 43 x 483 x 105 mm
(111/16 x 19 x 41/8”)
Weight 2 kg (4.4 lb)
AD9200A system specificAtions
Frequency response of the AD9200A