General tools LCR318 User manual

MINI HYGRO-
THERMOMETER
USER’S MANUAL
LCR318
Please read this manual carefully and thoroughly
before using this product.

• Foldaway stand for desk mounting; also can be
wall-mounted
• Includes battery
• CE approved
WHAT’S IN THE BOX
The CR318 comes in a box along with:
• A preinstalled “ R44” battery with an activation tab
• This user’s manual
CTION
rchasing General Tools & Instruments’
ro-Thermometer. Please read this
refully and thoroughly before using
ideal instrument for monitoring the
perature environment of pianos,
ellars, musical instrument cases and

MOUNT THE UNIT
To leave the unit free to move on a horizontal
surface, lift the foldaway stand on the back of the unit
by placing your fingertip in the recess on the bottom
edge of the unit.
To attach the unit to a wall or vertical surface, obtain
a pair of Velcro strips and—without separating them—
trim them to a size of 1-3/4 in. by 3/8 in., or slightly
smaller than the recessed rectangular mounting area on
the top rear of the unit. Remove the paper backing from
nit:
ry compartment (marked OPEN) on the
e back of the unit by sliding its cover
irection of the arrow stenciled on it.
ack activation tab under the R44
Discard the tab.
ery in the well so its rounded side faces
lat side (marked “ R44”) faces up. The
ot snap into place, so do not apply
ssure.

To reset the temperature and humidity memory,
press the CLEAR button on the front panel.
SPECIFICATIONS
Temperature Measurement Range: 14° to 140°F
Temperature Measurement Accuracy: ±1.8°F
Relative Humidity Measurement Range: 10 to 99%
RH Measurement Accuracy: ±5% of reading
Temperature Resolution: 1°
G INSTRUCTIONS
it displays the current ambient
he left readout and the current RH level
out.
i hest temperature and RH values
he unit was last reset, press the
on the right side of the front panel
will appear for 7 seconds, along with
the upper right corner. After 7 seconds,
turn to showing real-time temperature

RETURN FOR REPAIR POLICY
Every effort has been made to provide you with a
reliable product of superior quality. However, in the
event your instrument requires repair, please contact
our Customer Service to obtain an RGA (Return Goods
Authorization) number before forwarding the unit via
prepaid freight to the attention of our Service Center at
this address:
General Tools & Instruments
80 White Street
Y INFORMATION
nstruments’ (General’s) CR318
ometer is warranted to the original
ree from defects in material and
a period of one year. Subject to certain
ral will repair or replace this
r examination, the company
e defective in material or
anty does not apply to damages that

NOTES
______________________________________
______________________________________
______________________________________
______________________________________
______________________________________
______________________________________
NOTES
______________________________________
______________________________________
______________________________________
______________________________________
______________________________________
______________________________________

                