
English
Screwdriver/Flashlight 3.6V 
Operator’s Manual GLSDF36A
4
•  The tool will perform the job better and safer at the feed rate for which 
it is designed. Forcing the tool could possibly damage the tool and may result in personal injury.
• . Don’t force the tool or attachment to do a job for 
which it is not designed.
• .Any tool that cannot be controlled 
with the switch is dangerous and must be repaired or replaced by an authorized service center. 
• .It 
is dangerous in the hand of untrained users. 
• . 
component breaks, and any other conditions that may affect the tool’s operation. A guard or any other part that is 
damaged must be properly repaired or replaced by an authorized service center to avoid risk of personal injury.
• .Using accessories and attachments not recommended by the 
manufacturer or intended for use on this type tool may cause damage to the tool or result in personal injury to the 
• .Do not leave the tool 
until it comes to a complete stop.
BATTERY TOOL USE AND CARE
• 
 Inserting the battery pack into power tools that have the switch on invites accidents.
•  A charger that is 
suitable for one type of battery pack may create a risk of fire when used with another battery pack.
• .Use of any other battery packs may 
create a risk of injury and fire.
•  such 
as nails, coins, clips, keys, screws, or other small metal objects that can make a connection from one terminal 
terminals together may cause burns or a fire.
•  Avoid 
contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. 
• therefore, they 
are always in operation condition. Be aware of possible hazards when not using your battery tool or when changing 
accessories. Following this rule will reduce the risk of electric shock, fire or personal injury. 
SERVICE
• 
 This will ensure that the safety of the power tool is maintained. 
• . When cleaning a tool, be careful not to disassemble any 
portion of the tool since internal wires may be misplaced or pinched.