Genesys FourKonnect User manual

Remove the table from the box
01
For ease of assembly, and to avoid injury,
ensure the table is lifted by two people
Place the table face down
02
On a soft, clean surface to eliminate the
possibility of scratching.
Tip: Once the first table has been
assembled, it can act as a bench to
assemble further tables. We recommend
using the rectangle shape as your bench
with the box lid placed on top to avoid
scratching.
FOURKONNECT
To ensure proper assembly of your
FourKonnect folding table, please take the
time to read through the steps in this
assembly guide and follow them carefully.
we have already attached the table frame to
the table top for you.
ASSEMBLY INSTRUCTIONS

Screw the leg bolts to the frame by hand.
Tighten with the allen key provided.
Repeat steps 3 and 4 until all legs are
securely fastened to the frame.
Note: Extra care should be taken to avoid
double crossing the bolt thread.
Securing the legs
04
Check the frame
05
To ensure the locking mechanism is in the
locked position.
It's that simple...
06
Two people should then flip over your
finished FourKonnect table and place on
the floor.
Remove a leg from the box
03
Insert the leg bolts through the two legs as
shown, until the thread is showing on the
other side.