Genesys Spynamics SD11 User manual

USER INSTRUCTIONS FOR SD11 CHAIR
The Mechanism

Arms:
The (upholstered) arms are adjustable for height, width, angle (you can swivel the pad to suit your
working arrangements such as a laptop or carrying out some intricate manual work), and depth
(you can slide the pad forward and back depending on how close you like to sit to the desk edge).
Back angle:
Lift the lever to unlock and push down to lock. The tension of this adjustment is spring controlled.
The optimum position will need to correspond with the work you are doing –for instance
prolonged typing or keyboard work will need an upright angle. Multitasking can take a more
relaxed angle.
Ratchet backrest height adjustment:
To raise the back, simply lift the back a click at a time.
To lower the back, lift the back up to its highest point to disengage the ratchet which in turns
allows the back to drop to its lowest point.
Two way adjustable lumbar:
There are two wheels attached within reach at the back of the seat, one on the left and one on the
right.
The left wheel adjusts the
lumbar up and down your
spine by turning the same
way.
The right wheel adjusts
the lumbar in and out of
your spine by turning it
clockwise or
anticlockwise.
Do not over turn these adjustment wheels.
Optional : The headrest adjusts in
height and tilt by lifting manually
and can be removed