GENEVO One S User manual

USER MANUAL
Radar Detector GENEVO ONE S Black Edition

Radar Detector GENEVO ONE S Black Edition 01
Congratulations on your purchase of world´s most intelligent radar
and laser detector GENEVO ONE S Black Edition.
Main functions of GENEVO ONE S Black Edition
GENEVO ONE S Black Edition is the most powerful detector from GENEVO family and is designed to protect the driver from
speeding fines. GENEVO ONE S Black Edition communicates with driver in English and its main functions are detection
of microwave radars (K / Ka bands), laser guns, red light cameras and sectional speed cameras (using its own GPS database).
Notifications:
Text warning and voice alert appears on GENEVO ONE S Black Edition during radar alert. Strength of the signal and beeps
expresses the intensity of the received signal. Signal strength has ten levels. GPS alerts are reported by voice. For example
“Speed Camera”.
Control:
1) Left button MENU / ON-OFF
Short press: You will enter into setup menu.
During the signaling radar you will mute the volume. The next alarm will be reported again in the standard volume.
Long press: Turn ON / OFF GENEVO ONE S.
2) Middle button BRIGHTNESS / ALERT SUPPRESSION

Radar Detector GENEVO ONE S Black Edition 02
Short press: You can change the brightness of the display - Bright Dim Smart Dark Full Dark.
Long Press: If you hold it during an alert you will mark the place of false radar reporting so at a given point detector
during the next passage will be suppressed. If you suppress a false alert, detector will not detect radars in radius of about
150 meters. Hold button during the „suppressed“ radar alert and this listing will be canceled. After next passage radar
alert will be signaled acoustically.
3) Right button SENSITIVITY / ADD YOUR OWN GPS POINT
Short press: You can scroll between Highway / City / Auto City modes. In City or Auto City modes the sensitivity of K / Ka
bands can be reduced according to user preference.
Long Press: Add your own GPS point.
4) Buttons on the right side + / -
Short press: Changing volume of the detector.
Menu:
Press Left button for enter into menu.
Press Left button to go from one category to the next.
Press VOLUME +or –(on the right side of detector) to change your setting within a category.
To complete this change, simply wait a few seconds without pressing a button. The unit will display “Setting Completed”
to confirm your selection. Alternatively, you can get out of the menu by pressing the Right button.

Radar Detector GENEVO ONE S Black Edition 03
Items in the menu are as follows:
(recommended settings are highlighted)
Sensitivity: Highway / City / Auto City
Setting the speed in Auto City (item is present only if the sensitivity is set to Auto City): Through Middle button you are
selecting between speeds for editing (left number indicates the speed below which the detector will not respond to alerts.
Right number indicates the speed below which the detector will detect alerts like in City mode). + / - buttons on the right
side of the detector change the specific speed. When detector is set up to “20 50” speed below 20 km/h on the radar will
not respond. In the velocity range 20-50 km/h will only respond to stronger radar signals. Maximum detector sensitivity on
the radar starts from 50 km/h.
Setting values City and Auto City sensitivity (entry is present only if the detector sensitivity is set to other than Highway):
Via Middle button you can select radar band for editing. To change the signal level which will respond to radar signals
use + / -. The level of suppression can be selected in the range 0-9. For example, when setting is X2 K2 and Ka2 the level
of detection in all bands are slightly decreased.
Display Mode: Speed/Time, Speed/Voltage, Voltage, Time, Speed, Speed/Compass
Auto Mute: On / Off: If it´s activated, after two seconds of ongoing alert the volume will be reduced.
The minimum speed for signaling radar: Off, 10 km/h, 20 km/h, 30 km/h ......... .. 130 km/h
K-Band: Wide / Narrow / Instant On / Off (In countries, where police use K band radars, it is recommend to use K Narrow
setting)

Radar Detector GENEVO ONE S Black Edition 04
K Filter: Off / Low / High - Filtering false alerts from blind spots and ACC. (When K Filter is activated, pulsed radars such as
Iskra are not detected)
Ka-Band: Wide / Narrow / Off
Ka 34.0: On / Off (if you are sure that police in your region does not use this band, then Off)
Ka 34.3: On / Off (if you are sure that police in your region does not use this band, then Off)
Ka 34.7: On / Off (if you are sure that police in your region does not use this band, then Off)
Ka 35.5: On / Off (if you are sure that police in your region does not use this band, then Off)
Ka Filter: Off / Normal / High - Filtering false alerts from blind spots and ACC. (When Ka Filter is activated, detection
distance on Ka band radars is slightly reduced. We recommend using „Normal“ which is very good in sensitivity/false alerts
immunity ratio.)
Laser: On / Off
Startup sound: On / Off
GPS connect announce: On / Off
GPS detection by database type: Via Middle button you can select the type of GPS points. For editing use + / -. You can turn
on and off particular type of point.

Radar Detector GENEVO ONE S Black Edition 05
GPS warning distance: Normal (approx. 250 m) / Farther (approx. 375 m) / Farthest (approx. 500 m)
Unit: English (mph) / Metrics (km/h)
Set local time: You can change time zone via + / -
Language: English / Deutsch / Czech
Factory reset: For reset press Middle button.
Delete all user points: For deleting all user points press Middle button.
SpeedMeter Option:
This function is intended for the legalization of the detector when used in countries where radar detectors are prohibited.
The detector stops alerting you on GPS points, radars, and lasers and there is only your current speed shown on the display.
To activate this function you need to hold the Middle button and Right button together for approximately 5 seconds. After
that, you will enter into SpeedMeter mode. To reactivate your detector again, unplug it from the power source, hold the Right
button and „+“ button and then plug it into the power source. You need to hold the buttons for approximately 8 seconds.
After 8 seconds display will show (SpeedMeter OFF). Now you have a fully working detector again.

Radar Detector GENEVO ONE S Black Edition 06
Operating frequency:
GPS: SiRF STAR IV
Ka narrow: 34.0 GHz, 34.3 GHz, 34.7 GHz, 35.5 GHz
(±120 MHz)
Ka wide: 33.4 GHz – 36.0 GHz
K narrow: 24.125 GHz (±70 MHz)
K wide: 24.125 GHz (±150 MHz)
Laser: 904 nm
Technical parameters:
Operating temperature: -20 to +85 °C
Storage temperature: -20 to +85 °C
Operating voltage: 11 – 24 V DC
Energy consumption: 250 mA normal, 330 mA
max (12 V)
Dimensions: 62 * 92 * 34 mm
Power input: 3.96 W
Connector polarity: Positive
Power supply fuse: F2A/250V

Radar Detector GENEVO ONE S Black Edition 07
Declaration of Conformity:
The manufacturer, GENEVO s.r.o., hereby declares that GENEVO ONE S Black Edition equipment complies with the
essential requirements and other relevant provisions of Directive 2014/53/EU. The full Declaration of Conformity can
be downloaded here: www.genevo.com/en/ce-one-sb.pdf
Database Updates:
Database update is recommended monthly. Download of the new database
is performed according to the instructions www.genevo.com/en/updates
while at www.genevo.com/en/updates-subscription
you can register and receive notifications of new and updated database to your email.

Radar Detector GENEVO ONE S Black Edition 08
Safety Instructions
We recommend that you install the p roduct using the included bracket with suction cups on the windshield so that it
does not obstruct your view. Alternatively, the product can be placed in another location provided it is securely fastened to
prevent the device from moving by itself. The location must have good GPS signal reception. The device must be powered
using the supplied 12 V cable (to be plugged into a 12 V plug in the vehicle) with a jack type connector to be connected to
the appropriately marked plug on the device.
Additional Information
Restrictions on placing in service or applicable requirements for permission to use:
Country: AT, BG, CY, DE, DK, EE, ES, FI, FR, GR, IR, ITA, LT, LU, LV, MT, NL, PL, PT, SE, SK.
Requirements: Please check your legislation before use.
Please note: The product may only be used for the purposes specified in this manual. Never use damaged equipment.
If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further information.

Radar Detector GENEVO ONE S Black Edition 09
Your Dealer:
Manual REV: 2022-03-29
Manufacturer: GENEVO s.r.o., Radčina 497/22, 161 00 Praha 6
Other manuals for One S
1
Table of contents
Other GENEVO Security Sensor manuals
Popular Security Sensor manuals by other brands

FALL SAFE
FALL SAFE STD2018 instruction manual

iRay Technology
iRay Technology Mars1717V user manual

Detection Systems
Detection Systems DS1520 installation instructions

Instar
Instar IN-6014 HD user manual

jablotron
jablotron JA-60N user manual

System Sensor
System Sensor ECO1005ABL Installation and maintenance instructions