Genius WIRELESS TRAVELER SE2 - User manual

Service Manual
Wireless Traveler SE2

ServiceManual WirelessTravelerSE2
Table of Contents
Chapter 1. Introduction.....................................................................................................................2
a. System Requirements...............................................................................................2
b. Support Windows.....................................................................................................2
Chapter 2. Troubleshooting...............................................................................................................3
Chapter3. Testing Procedures……………………………………………………………..4
a.Testing Flow Chart……………………………………………………………………4
b.Check Receiver LED………………………………………………………………….5
c.Check Mouse LED……………………………………..……………………………..6
d.Check Mouse Button………………………………..………………………………7
e.Check Cursor…………………………………………………………………………8
f.Check Connecting between PC and Mouse…………………………………………9
Chapter 4. Removal and Replacement............................................................................................10
Chapter 5. Parts list.........................................................................................................................12
Chapter 6. Tools..............................................................................................................................12
Version 1.0
P
age 1

ServiceManual WirelessTravelerSE2
Chapter 1. Introduction
a. System Requirements
♦IBM PC Pentium 233 compatible or higher
♦Windows XP/Me/2003/2000/98,Mac OS 8.6 or higher
♦Available PS2 orUSB port
b. Support Windows
♦XP//Me/2003/2000/98SE, and Mac OS
Version 1.0
P
age 2

ServiceManual WirelessTravelerSE2
Chapter 2.Troubleshooting
Item Condition Probable Reasons Solutions
1. Mouse can’t
work 1. Cursor can’t work 1. Receiver or mouse failed Change Receiver or mouse upper PCBA
2. Button can’t
work 1.Press button no respond 1. Mouse upper PCBA Change mouse upper PCBA
3. Cursor can’t
move smoothly 1. Cursor can’t move smoothly 1. Battery no power or sensor failed Change new battery or mouse down PCBA
4. Receiver LED
Unlight 1.Cursor couldn’t work 1. LED fail 1Change Receiver
Version 1.0
P
age 3

ServiceManual WirelessTravelerSE2
Chapter 3. Testing Procedures
a. Testing flow chart
T
T
T
T
Replace
b
attery or Mouse
down PCBA
Replace
Receiver
Replace battery
or Mouse down
PCBA
F
F
Check Mouse
buttons Replace Mouse
down PCBA
T
Check
Connecting
b
etween PC with
Mouse
END
Replace Receiver or
Mouse upper PCBA
Check Cursor
Check Mouse
LED
Check Receiver
LED
START
F
F
F
Version 1.0
P
age 4

ServiceManual WirelessTravelerSE2
b.Check receiver LED
If receiver LED is off the receiver can not function, please replace
receiver.
Receiver LED
Version 1.0
P
age 5

ServiceManual WirelessTravelerSE2
c.Check Mouse LED
If the mouse LED is off the mouse will not function, please
replace new battery or mouse down PCBA.
Mouse LED
Mouse down
PCBA
Version 1.0
P
age
6

ServiceManual WirelessTravelerSE2
d.Check mouse buttons
If the mouse buttons do not function, please replace mouse down PCBA.
Mouse down
PCBA
Version 1.0
P
age
7

ServiceManual WirelessTravelerSE2
e.Check cursor
If cursor is unstable or does not move smoothly, please replace new battery.
If still does not work after replacing new battery please replace mouse
down PCBA.
Mouse down
PCBA
Version 1.0
P
age 8

ServiceManual WirelessTravelerSE2
f.Check connecting between PC and mouse
If receiver LED and mouse LED are on and the mouse still can not
function, please replace receiver or replace mouse upper PCBA.
Mouse upper
PCBA
Version 1.0
P
age 9