Geo Trio II Touch Button User manual

Electricity & Gas
You can see more about your energy consumption (both
electricity and gas) by selecting an option from the Menu.
Day
Your hourly energy use for today. You can see this in terms
of energy (kWh) or cost (£) - select the wbutton to change
between kWh or £.
The row shown in LIGHT GREEN is the hour during which most
energy was consumed. The total is to the right.
Week, Month and Year
A visual representation of energy use over the past nine days,
six weeks or 14 months, with the period of highest energy
consumption highlighted.
If a budget has been set (see Settings > Budget), then
performance against a budget is shown. The areas shaded in
RED show where over-budget energy has been used.
Technical specications
This product is designed to be used indoors in a domestic
environment. It is not suitable for outdoor use. It is intended
to be installed and congured by a qualied installer only.
Supply voltage 240Vac, 50Hz
Operating voltage 5Vdc
Operating power < 0.6W
Operating temperature 0 to 40ºC
Operating humidity 0 to 85% non-condensing
Further information
More detailed information on the Trio II is available online at
http://www.geotogether.com/trio2
Safety notice
Please be aware of these simple safety precautions
when using this product. Safe operation of your Trio II
may be hindered if used in a way that is not specied by
the manufacturer.
Keep the Trio II away from water and other liquids.
Disconnect from mains power supply before cleaning
(with a soft, dry cloth only). Please contact your
supplier if any components appear damaged or faulty.
Your Trio II is designed to be used in an indoor,
domestic environment only.
To protect the environment, this product and its
batteries must be disposed of safely.
This product is CE approved.
This product complies with RoHS regulations.
Manufacturer
Designed and manufactured by:
Green Energy Options Ltd.
3 St. Mary’s Court, Main Street, Hardwick, Cambridge
CB23 7QS, UK
Hereby, Green Energy Options Ltd. (UK) declares that the
radio equipment enclosed (identied by the product type
numbers on the product label) are in compliance with
Directive 2014/53/EU.
The full text of the EU declaration of conformity is available
online at www.geotogether.com/cedoc
TR2L-A-QRG-001_3
Troubleshooting
My monitor isn’t showing any information
If your monitor shows Waiting for data, this could be
because your monitor is out of range and is not able to
communicate with the smart meter. Try moving your monitor
closer to the smart meter.
If problems persist, please contact your supplier.
My display is making a noise
The display has a built in speaker which is used to notify you
of alerts, messages and can also provide feedback when you
interact with the display. You can adjust the volume, and turn
o/on the dierent sounds via the Settings page.
System Status shows a cloud error
The cloud service is only available if your Trio II has the
optional Wi-Fi module tted.
When the System Status screen shows the cloud symbol
(p) in red or amber, then this means one of the following:
• Your cloud account has not been congured.
• The monitor is unable to access the cloud service - check
your home broadband connection.
• The cloud service is temporarily oine.
My monitor is blank or has switched itself o
The monitor backlight may have turned itself o to save power,
press one of the touch buttons to switch it back on. This setting
can be changed under Settings.
If you are using batteries to power the monitor, the batteries
may have gone at. The battery icon (o) will be shown when
operating on battery power. The running time is four hours.
Reconnect to the mains adaptor or replace the batteries.
We recommend that the monitor is powered continuously
using the power supply provided.
Trio II Touch Button
Quick Start Guide
TR2L-A-QRG-001_3.indd 1 30/05/2017 11:54

Now
Electricity Gas
2.63 kW 1.36 m3
Today
Home
Prepay
14:37
Use arrow buttons
to move between
Now, Today
and Prepay (if
applicable) tabs.
Introduction
The Trio II shows energy use for electricity and gas smart
meters and will have been congured to work with the meters
you have installed, which may be electricity, gas or both.
Please read the important safety notice overleaf before
using your monitor.
Setting up
Connecting the power supply
Connect the power supply to your Trio II. Your monitor
will turn on automatically when you plug it into the mains.
You should always leave your monitor connected to the
power supply.
You can congure the screen on the monitor to dim or switch
o at certain times of the day. (See Settings > Display)
The power supply has been made exclusively for the Trio II
monitor and must not be used with other devices.
Using batteries
Your monitor can optionally be used with 3 x AAA (LR03)
non-rechargeable batteries.
Remove the back cover and insert the batteries, as marked
on the inside case. Reattach the back cover and the monitor
will show the battery symbol (o) at the top of the screen.
It’s advisable to power the monitor with the supplied power
supply and to not use batteries for a prolonged period.
Smart meter connection
Each time the monitor is turned on it will show Connecting
to smart meter... while establishing a connection. This can
take up to ve minutes.
It may take up to one hour after the initial setup for the gas
consumption to show on the screen.
Overview of the monitor and the Home screen
The LED at the bottom of the monitor
shows your electricity usage (GREEN
for low, AMBER for medium or RED for
high) or BLUE for gas-only setups.
The title of the
screen shown and
the current time.
The ame shows
the recent rate of
gas consumption
(typically over the
last 30 minutes).
Press to switch between
cost or energy consumption
whilst on Home screen.
The left of the screen shows the current
rate of electricity consumption. As
appliances and lights are switched on
and o, the dial needle will move.
If you only have a
gas smart meter,
then the electricity
dial is not shown.
The rate of
consumption is
shown in cost per
hour or, if kW is
selected, the rate of
energy being used.
Press to enter
Menu whilst on
Home screen.
Press to return
to Home.
Press to return to
previous screen.
Use the b c
buttons to navigate
around the screen.
Menu
The main menu is only available from the Home screen. To
select it, touch the tbutton at the bottom of the screen.
Electricity/Gas usage
Detailed information on the electricity consumption for the
day, week, month and year.
System status
Quick indicator of whether the system is working OK (GREEN)
or if there is something that needs attention (AMBER or RED).
Meter balance
Information on the cost of used energy (credit meter) or
balance available (pre-payment meter).
Prepay (prepay customers only)
Top up your current balance, activate emergency credit and
view your top-up history.
Tariffs
Displays the current and next electricity and gas prices.
Debt (prepay customers only)
Outstanding debt with your utility provider will be outlined
with a breakdown of the charges and recovery rate.
Inbox
View messages received from your utility provider(s). New
messages will be shown on the Inbox screen automatically.
Meters
Information on your electricity or gas meter and the current
meter readings.
Support
Contact details for your utility provider(s), (may include a
telephone number and email address).
Settings
Personalise your Trio II within the Settings screen.
TR2L-A-QRG-001_3.indd 2 30/05/2017 11:54