Geo Web Pack User manual
GET SET UP
1. Select the correct set of pins. Insert
and twist clockwise to clip the pins
to the power supply. Plug the power
supply into a mains socket and insert
the other end into the Internet Bridge.
2. Using the Ethernet cable provided,
connect the Internet Bridge to your
broadband router.
The Internet Bridge will get an IP address
automacally from your router
ENERGYNOTE ONLINE SERVICES
To access your on-line service you must
log in to the web service.
1. Open your web browser on
your computer.
2. Go to: energynote.co.uk/start
3. Create your personal Energynote
account and follow the online
instrucons to set up your
Internet Bridge.
4. Once you have logged in, your online
dashboard will appear on screen.
See and explore the various features that
the online dashboard provides.
Tip: If you would like to see what your
In-Home Display is reading while you
are away from your house you must
remember to leave the broadband router
and the Internet Bridge turned on.
Note: The dashboard features may vary
depending on your parcular supplier.
TECHNICAL INFORMATION
Item: Web Pack
Rated Voltage: 230Vac 50Hz
Input Power: 0.25W
Temperature Range: 0 to 40°C
Humidity: 85% non-condensing
Conforming Standards: EN60950-1
EN301 489-3
EN300 220-1
CE approved. This product is approved
for use in the EU.
The Web Pack is an accessory for your
In-Home Display. It:
• Connects your In-Home Display to
the Internet
• Enables you to monitor your home
and control appliances remotely via
your Energynote web service
What’s inside the Web pack:
Internet Bridge, Power Supply and
Ethernet cable.
SAFETY FIRST:
It is important to observe some simple safety
precauons when using this product. Safe
operaon of the Web Pack is impaired if used in a
manner not specified by the manufacturer.
Keep the Web Pack content away from water and
other liquids. Disconnect before cleaning (with a
so dry cloth only) and do not immerse in water
or other liquids. Please contact your supplier if
any components appear damaged or faulty.
The Web Pack content is designed to be used in
an indoor domesc environment only.
To protect the environment, this product must be
disposed of safely at the end of its life.
This product complies with RoHS regulaons.
CE approved. This product is approved for use in
the EU.
Web Pack
QUICK START GUIDE
ENBR-A-QSG-001_4
All manuals and user guides at all-guides.com
all-guides.com
Making energy engaging
In-home | mobile | online
Web Pack
QUICK START GUIDE
For a simpler start, go to:
energynote.co.uk/start
Display Pack Web Pack Smart Plug Pack
All manuals and user guides at all-guides.com
Other Geo Transmitter manuals
